Vag k+can commander 3.6

[drpeter]

Someone tried this china clone on a A4 2005 (RB8?) and Golf 5 Visteon clusters?

VAG K + CAN COMMANDER V3.6: eBay Motors (item 250632290134 end time Jun-12-10 03:16:36 PDT) (http://cgi.ebay.com/ebaymotors/VAG-K-CAN-COMMANDER-V3-6-_W0QQcmdZViewItemQQhashZitem3a5ad93f56QQitemZ25063 2290134QQptZMotorsQ5fAutomotiveQ5fTools)

Thanks,

Peter

[exxl]

hi,

i am interested too in this, if anyone has vag k+can 3.6 and has worked with it, please reply a review about it how it works on dashes.

regards

[obdmaster]

The software can be downloaded from here m8.

China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1424&sortsid=3502&sorts=)



I bought it when it was v3.0, ive just downloaded the 3.6 version and the 3.6 software recognises my interface, but ive not tested it on car yet m8:unionflag:

[exxl]

it would be good to know how it works on cars specially on rb8 audi clusters and golf 5 visteon clusters....

if you have a chance to test, please remember to write here a review about your test...

regards

[rsibiza]

The software can be downloaded from here m8.

China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1424&sortsid=3502&sorts=)



I bought it when it was v3.0, ive just downloaded the 3.6 version and the 3.6 software recognises my interface, but ive not tested it on car yet m8:unionflag:

hi OBDmaster.

Does your k&can also do edc16 mileage?

I have k&can 1.4 working great for all k-lines,but no can
I have can commander 4.x? As it says can,but edc16 milleage...no luck,a3 sportsback dash 2006 no luck.
Best regards.

[drpeter]

The software can be downloaded from here m8.

China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=1424&sortsid=3502&sorts=)



I bought it when it was v3.0, ive just downloaded the 3.6 version and the 3.6 software recognises my interface, but ive not tested it on car yet m8:unionflag:

Nobody tested vag k+can commander 3.0 or 3.6 on a A4 RB8 or Visteon cluster?

[episcop]

Nobody tested vag k+can commander 3.0 or 3.6 on a A4 RB8 or Visteon cluster?

I'm tested... A4 02' and 04' RB4 or RB8 with 24c08, don't working.

[spiria]

Version 2.5 very good read&write A4 RB4 dump from cluster, but not calculate miliage. I use for calc miliage Licznik 4.8a.

[drpeter]

Version 2.5 very good read&write A4 RB4 dump from cluster, but not calculate miliage. I use for calc miliage Licznik 4.8a.


Yes but Licznik is not accurate +/- 1500 km. I use VAGPROG for RB4, but I need a good solution for A4 RB8 and VW Visteon clusters for a good price, smelecom VAGPROG update is too expensive for me.
Don't get these cars often.

PS vag k +can 1.4 can also read/write dump from RB4 but no mileage change.

[grzesiop]

I m tested vag comm 3.6 on rb8 cluster and don t work

and i have golf with rb8 and vag if you have any ideas how to run this please write

[dyc]

it works without problems with magicdashcan

[nikz]

I m tested vag comm 3.6 on G4 motometer with 24c02
and don't work

[Rito]

I am test in 2 VW passat year:2006 one work good other not work..
But in second read correct mileage and says odometer changed......

[AbuS3ood]

I am test in 2 VW passat year:2006 one work good other not work..
But in second read correct mileage and says odometer changed......

thats right

[mlulic]

I m tested vag comm 3.6 on G4 motometer with 24c02
and don't work
to the instrument cluster labels BOO.I play hand.Vag k can neade security code (asks him for a long time ago)