Nexiq USB Link interface cable pinout

[cccosminus]

Hello guys,
I have a Nexiq USB Link interface , but i have only Deutsch cable(with 9 pins).
Does anyone have another cables( OBD..etc),and could help me with pinout diagram?
Anticipated thanks!!:barscarf::barscarf:

[elgole]

Hope this help.

[cccosminus]

Thanks for your help,but is not what i need , does anybody have some real answer to:pcguru: my problem?

[electricaldust]

[Cita = cccosminus; 602593 Gracias] Por tu Ayuda, Pero No Es Lo Que necesito, ?ALGUIEN Tiene Alguna Respuesta real de las Naciones Unidas:pcguru: Problema mi? [/ Quote]

"Only death is the end of hope, everything else is just despair"

[cccosminus]

Thanks again ,but still don t resolve my problem...my conector on interface got 26 pins, and from there i don t know where ,and how wires goes to OBD conector...and to other conectors(for Caterpilar, Volvo..etc).
Does anybody have this kind of Nexiq interface and cables??
:captain:

[electricaldust]

[Quote = cccosminus; 603964] Gracias de nuevo, pero don t resolver mi problema ... mi conector en la interfaz tiene 26 pines, y de ah? yo no s? d?nde, y c?mo va a cables DAB conector ... y otros conectores (para Caterpilar, Volvo .. etc).
?Alguien tiene este tipo de interfaz de Nexiq y cables?
:captain:[/ Quote]
is a paralel port? if is it this one 25 pin you need

[cccosminus]

Here what i have:

and is with 26 pins.

[electricaldust]

[Quote = cccosminus; 605403] Aqu? lo que tengo:

y es con 26 pines. [/ quote]

why dont samples the the entry of the interface?

[juliooctavio]

i Know what do you mean i have the same trouble

i order conectors
OBD II 448013
OBD II 444009 (some Ford and GM)

i hope my connector arrive on a week

and then i can help you :proud:

[rp1210a]

cccosminus

In the past they have always been DB15 connectors. Looks like they changed the design. If you have an ohmmeter can you tell us the pinouts on your connnector. I can help you make an adapter for 6pin trucks. I think the OBD II 448013 connector is also DB15 so thats not going to help you if the connector on the interface is 26 pin.

http://i608.photobucket.com/albums/tt163/boober811/9pintodb15.jpg

http://i608.photobucket.com/albums/tt163/boober811/6pintodb15.jpg

http://i608.photobucket.com/albums/tt163/boober811/3pintodb15.jpg

[cccosminus]

rp1210a , (http://www.digital-kaos.co.uk/forums/members/72812-rp1210a/)
Sorry for delay but tomorow i ll try to put what i have, hoping that we will do all that types of cables.
Thanks everyone involved !

[danyedu21]

tengo el nexiq usb link y tengo los cables para volvo rectangular de 8 pines el cable y de 6 y 9 y tambien el obd heavy duty no se de cual especificamente les pueda servir para intentar subir el diagrama

[peter21]

tengo el nexiq usb link y tengo los cables para volvo rectangular de 8 pines el cable y de 6 y 9 y tambien el obd heavy duty no se de cual especificamente les pueda servir para intentar subir el diagrama


los de volvo y obd heavy duty.....

[superc0]

who have the cummins inline 25 pinout cables diagram?

[brimmstone]

I don't have a diagram but I do have the cable. I'll try to do a pinout of it tomorrow

[rp1210a]

This is for cummins and Kent-Moore interface. Does anyone have drivers for the old kent-moore interface? Might be the same as Cummins InlineII or Old Mack.

http://i608.photobucket.com/albums/tt163/boober811/9pintodb25.jpg

[rhyttr]

This is the D-Sub 15 pinouts

and the D-Sub 26 pinouts, and my nexiq version is Rev G

It seems that D-sub 26 don't have all the signals of D-Sub 15.

I don't know how is you version

http://farm5.static.flickr.com/4059/4666191518_aa31f4b87a_b.jpg

[rp1210a]

"It seems that D-sub 26 don't have all the signals of D-Sub 15."

iIts possible but very unlikely that the 26 pin connector doesnt have pin 4-5 j1850pwm. But i think its impossible that it doesnt have pin 14-15 j1708. Maybe they are going to different pins on db26 connector.Trace back pins G + F on the 9pin deutsch connector, those are for j1708 data.

[makura]

Hi
can you use nexiq on the smaller cars with obd2,and which diagnostic software supports this interface in odb2?

[rp1210a]

Its a j2534 interface so it should do bmw/mercedes/toyota/...

anyone tried it???

below are the nexiq reg entries for j2534

[HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport.04.04\ NEXIQ Technologies - USB-Link]
"ISO9141"=dword:00000001
"ISO14230"=dword:00000001
"ConfigApplication"=""
"FunctionLibrary"="C:\\Windows\\system32\\NXULUJ32.DLL"
"Vendor"="NEXIQ Technologies"
"Name"="NEXIQ USB-Link over USB"
"ISO15765"=dword:00000001
"J1850VPW"=dword:00000001
"J1850PWM"=dword:00000001
"CAN"=dword:00000001
"SCI_A_ENGINE"=dword:00000000
"SCI_B_ENGINE"=dword:00000000
"SCI_A_TRANS"=dword:00000000
"SCI_B_TRANS"=dword:00000000
"CAN_CH2"=dword:00000001
"ISO15765_CH2"=dword:00000001
"DeviceID"=dword:00000001
"CAN_CH1"=dword:00000001
"CAN_PS"=dword:00000002
"ISO14230_PS"=dword:00000001
"ISO9141_PS"=dword:00000001
"J1850VPW_PS"=dword:00000001
"J1850PWM_PS"=dword:00000001
"ISO15765_CH1"=dword:00000001
"ISO15765_PS"=dword:00000002

[Daniel krenz]

hello. my name is daniel, I'm from Argentina, I work in electronics. I'm starting with the ECU and immo repair car, would be a pleasure to share information with you. and participate in this forum to see people with lots of knowledge and experience, sorry if my sentences are very clear but I speak little English language. thanks and regards

[superc0]

hello. my name is daniel, I'm from Argentina, I work in electronics. I'm starting with the ECU and im*o repair car, would be a pleasure to share information with you. and participate in this forum to see people with lots of knowledge and experience, sorry if my sentences are very clear but I speak little English language. thanks and regards


WELCOME AND ENJOY THIS GREAT FORUM:giveup:

[superc0]

Its a j2534 interface so it should do bmw/mercedes/toyota/...

anyone tried it???

below are the nexiq reg entries for j2534

[HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport.04.04\ NEXIQ Technologies - USB-Link]
"ISO9141"=dword:00000001
"ISO14230"=dword:00000001
"ConfigApplication"=""
"FunctionLibrary"="C:\\Windows\\system32\\NXULUJ32.DLL"
"Vendor"="NEXIQ Technologies"
"Name"="NEXIQ USB-Link over USB"
"ISO15765"=dword:00000001
"J1850VPW"=dword:00000001
"J1850PWM"=dword:00000001
"CAN"=dword:00000001
"SCI_A_ENGINE"=dword:00000000
"SCI_B_ENGINE"=dword:00000000
"SCI_A_TRANS"=dword:00000000
"SCI_B_TRANS"=dword:00000000
"CAN_CH2"=dword:00000001
"ISO15765_CH2"=dword:00000001
"DeviceID"=dword:00000001
"CAN_CH1"=dword:00000001
"CAN_PS"=dword:00000002
"ISO14230_PS"=dword:00000001
"ISO9141_PS"=dword:00000001
"J1850VPW_PS"=dword:00000001
"J1850PWM_PS"=dword:00000001
"ISO15765_CH1"=dword:00000001
"ISO15765_PS"=dword:00000002

MAYBE THIS CAN BE POSSIBLE, SORRY FOR MY BAD ENGLISH

[cccosminus]

I was instaled the Nexiq drivers for USB link,...after installation, i try on "" Test Device"", the protocols ...and i got answer from interface only at next protocols:
OBD II
J 1850PWM
J 1850WPW
J 1850
ISO 9141
ISO 14230
...i don t get answer at:
J1708, J1939 and ALDL...what does it mean? did i miss something, or anybody know how to see in wich protocols are working this interface and how to test this?

[hercamp]

u didnt get answer because in j1708 and j1939 u need to be connected to ecm .

[epetr]

HI all, i'm emanuel from Italy, i found this forum as i was looking for nexiq cable pinouts, i see people with lots of knowledge and experience here, i' m sure you can help me !!

[aaacrack]

Dear All,

I'd like to connect ECM from Cummins QST30 and QSK60 series with Cummins Insite and NEXIQ USB Link.
The problem is, the port of the engine is not same with 9 pin Deutsch from NEXIQ (picture attached).
Please help, what kind of data cable to connect with that type of connector? please forward link for shop/store that supply this data connector so I can connect to NNEXIQ USB Link.
Really need your help..
Thank you all....

[hercamp]

Dear All,

I'd like to connect ECM from Cummins QST30 and QSK60 series with Cummins Insite and NEXIQ USB Link.
The problem is, the port of the engine is not same with 9 pin Deutsch from NEXIQ (picture attached).
Please help, what kind of data cable to connect with that type of connector? please forward link for shop/store that supply this data connector so I can connect to NNEXIQ USB Link.
Really need your help..
Thank you all....

with all these pins...u really need pin out of terminal...also if its different to all.

[servialcaleta]

Dear All,

I'd like to connect ECM from Cummins QST30 and QSK60 series with Cummins Insite and NEXIQ USB Link.
The problem is, the port of the engine is not same with 9 pin Deutsch from NEXIQ (picture attached).
Please help, what kind of data cable to connect with that type of connector? please forward link for shop/store that supply this data connector so I can connect to NNEXIQ USB Link.
Really need your help..
Thank you all....


send me a PM with your mail,
I ?m not know how make a attachment file here.

[Lukas roberto]

I have a Nexiq magikey PDM but i have only Deutsch cable(with 9 pins).Does anyone have another cables( adapter USB.etc),and could help me with pinout diagram?
Does anybody have this kind of Nexiq interface and cables?
is a paralel port?

[ghadergholamnejad]

thank u for post 2

[zozi]

Hi,
This is a special plug in the name of our Deutsch HD 16-9-16S. PCS - Performance Connection Systems, Delphi, Tyco, Deutsch, Bussman, Connectors, Relays, Circuit breakers, wire, terminals (http://www.pcsconnectors.com/)
(http://www.pcsconnectors.com/)

(http://www.pcsconnectors.com/)

This and a Deutsch HD-14-9-96P type of host you should you can connect to Nexiq Y cable and Cummins ECM [$32+26]Need for you size#16 male and fimale terminals
I did and now I want to test him QSX 15 Power Generators with same ECM connector.

[zozi]

Hi,
This is a special plug in the name of our Deutsch HD 16-9-16S.
http://www.pcsconnectors.com/ (http://www.pcsconnectors.com/HD14-9-96P.aspx)



This and a Deutsch HD-14-9-96P type of host you should you can connect to Nexiq Y cable and Cummins ECM [$32+26]Need for you size#16 male and fimale terminals
I did and now I want to test him QSX 15 Power Generators with same ECM connector

[zozi]

:banghead:
Dear All,

I'd like to connect ECM from Cummins QST30 and QSK60 series with Cummins Insite and NEXIQ USB Link.
The problem is, the port of the engine is not same with 9 pin Deutsch from NEXIQ (picture attached).
Please help, what kind of data cable to connect with that type of connector? please forward link for shop/store that supply this data connector so I can connect to NNEXIQ USB Link.
Really need your help..
Thank you all....

:banghead:Dear friend,
This information was obtained yesterday.
I think the connection is only suitable for MODBUS comunication.

[cccosminus]

Does anybody know , how to make conection between Deutch conector(with 9 pins) from nexiq USB to an OBD conector?

[anoriega]

I need the to OBD2 NP 448013 schematic, someone can help me?

[junior.manager]

Vcads volvo esquematc

[cccosminus]

What do you mean??..in VCADS, could find..some wiring diagram??

[junior.manager]

I need the wiring diagram usb link for use in VCADS ptt

[colh]

Here what i have:

and is with 26 pins.

Who else has this version of nexiq with 26 pins on vehicle/machine end and where did you buy them.I have only seen versions with 15 pins.

[hargsv]

Hello

I am looking for Nexiq 448013 Pinout (j1962 to Db15) Thanks in advance.

[SaMirakle]

Hello

I am looking for Nexiq 448013 Pinout (j1962 to Db15) Thanks in advance.

You need the J1962 for OBD II? I don't know what you mean by "pinout." I know that the Nexiq Part number for that cable adapter is 448013. I have a small diagram of one but it doesn't show any details as far as any "pinouts" go.

[DonL]

Hello

I am looking for Nexiq 448013 Pinout (j1962 to Db15) Thanks in advance.

This works for J1850PWM VPW and ISO 15765 CAN
on a Nexiq USB-Link

[dimitar22]

I menaged to make pin out for inline 5 adapter:
Pin
23 Batery -
7 J1939 sheild
25 Batery+
8 J1939-
6 J1939+
4 J1708 ATA-
3 J1708 ATA+

But i cant find which pins are for K-line and L-line.Please if some one knows which are K-line and L-line tell me i realy need it.

[superc0]

who have the schematic for obd2 and cat adapter of nexiq usb link?
i need to do my own cable.

[hungvi2004]

Hi every body,
Now i have a problem with my USB-LINK, I have not connected with ECM.

The power lamp on USB LINK display on for 2 conditions:

1. connect USB LINK to vehicle, not connect usb cable to PC.
2. not connect USB LINK to vehicle, connect usb cable to PC.

The fault lamp not come on.

I have try connect by wireless (by bluetooth), i head a sound "Bip-Bip" but dianogsis application could not conneting to ECM.

and when i plugged usb link to the dianogsis connector on vehicle, that time the engine still running but the O meter on dashboard of driver such as engine speed, engine coolant temperature...) turned to 0 (zero).

I think the usb link be fault in circuit board inside.

I have to try using "device test" function, the result is connected.

[hungvi2004]

please help me, thanks

[bynow3]

did you have solved your problem mate?

[DonL]

This is not the Chinese Knock-Off of the Nexiq USB Link is it?

[BEETO]

Hello can anybody help me please, i have a 15 pin usb link, and want to plug into 2 pin cummins adaptor, has anybody got the diagram of how to make this plug and what pins go where , thanks.

[rastus86]

I need the OBD PLUG pinout diagram to use on the volvo and hino trucks if someone is willing to share the diagram thanks

[CESARIN]

Hi every body,
Now i have a problem with my USB-LINK, I have not connected with ECM.

The power lamp on USB LINK display on for 2 conditions:

1. connect USB LINK to vehicle, not connect usb cable to PC.
2. not connect USB LINK to vehicle, connect usb cable to PC.

The fault lamp not come on.

I have try connect by wireless (by bluetooth), i head a sound "Bip-Bip" but dianogsis application could not conneting to ECM.

and when i plugged usb link to the dianogsis connector on vehicle, that time the engine still running but the O meter on dashboard of driver such as engine speed, engine coolant temperature...) turned to 0 (zero).

I think the usb link be fault in circuit board inside.

I have to try using "device test" function, the result is connected.

i have de same problem, some one know where i can repair this.

thank you.

[fncisco]

j2534 YES! ScanXl from palmer... here is the clue.

[fncisco]

i have de same problem, some one know where i can repair this.

thank you.

Is an internal fail of Nexiq, just a Diode in shortcircuit, you can replace it with a zener 4,7V, just probe continuity to all diodes inside usblink and replace the shorted.
sorry my english, Is late.

If you need more info, post a picture of inside nexiq and I'll help you more detailed.

[jackalfa]

Please memebers, I need your help to identify the replacement for this diodes, thanks in advance...

[parezoo]

The USB-Link with 25 pins is not a USB link, it is an EDL... i never seen a USB Link with 25 pins.

[bucaro77]

Jackalfa,

Find enclosed pictures and lectures with diode tester for each one of related diodes on normal condition.

Bucaro

[Jari00]

The USB-Link with 25 pins is not a USB link, it is an EDL... i never seen a USB Link with 25 pins.

You are correct
Cosminus does not have Nexiq USB-link. It is John Deere EDL.

[carlosramospoma]

los de volvo y obd heavy duty.....

HOLA PETER POR MOLESTARTE TENGO UN INLINE 2 DB15 CUMMIN 193447Y NESESITO EL DIAGRAMA DE LAS CONEXIONES DEL CONECTOR DEUSH 9 Y 6 HAYUDAME PORFA VOR 193448

[ariasdiesel]

hello i have a usb link an i trid to conect a ram trok 2001 with a obd2 adapter and it not conect. do any body now whats wrong. can some one help me

[Roy Suryadwiananda]

hello i have a usb link an i trid to conect a ram trok 2001 with a obd2 adapter and it not conect. do any body now whats wrong. can some one help me

Ram Trok 2001 what it this, what program is use ?

[Roy Suryadwiananda]

Nexiq USBLink commonly used for vehicle as American products, for Volvo Europe, Asia/Japan as Hino, I do not know what else could be used as OBDII 16 pin/J1962.
Perhaps anyone ever tried to please share your experiences here.

[ahmeddakil]

hi
i have neqix usb link and tray to connect with perkins ecm or cat ecm but it can see it , i install the driver and the nexiq driver shown in device manager , and i chose the neqix i the EST and in the ET but still no connection between them , what can i do , pls help , regards

[Jelinntech]

Here what i have:

and is with 26 pins.

Thank you very much! Let me check and I hope it is what I want.
Is there a chip in this Nexiq 493148 adapter cable for authentication?