alfa 1.8 ts immo off

[carbyvw]

hi
did somebody have file immo off for alfa 1.8 ts (hybryd)
ecu num. bosch 0 261 204 947 m1.5.5.
thanks

[carbyvw]

yes,it is posibile,only ecu flash without immo box.
thanks for reply

[m_toy]

Hi.

Can you give me some detailed information, how to immo off on hybrid ECU?s ??

I need to do it on Alfa 146, with bosch 0 261 204 944
M1.5.5

THX

Regards

[euroscan]

- file for immo-off for ECU-s M1.5.5
--
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/408917085/COD.rar.html)

[puiu]

- file for immo-off for ECU-s M1.5.5
--
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/408917085/COD.rar.html)

Thanks,
but this solution is ok for bosch 0 261 204 944 ?

regards,

Puiu

[euroscan]

- this solutiion *.COD.bcb is ok for all hybrid M1.5.5 in alfa romeo ( not to opel !!1).
- next must upload ORI file.
145 ORI is 943-0819, 944-0819, 945-0392, 944-2979
- in 146 nor exist M1.5.5 , only ME7.1.1, ORI is 508-2546.

[nicamarcos]

- this solutiion *.COD.bcb is ok for all hybrid M1.5.5 in alfa romeo .

Hmmmm...Also for 2.0 16v NASP???:idea:



- in 146 nor exist M1.5.5.

Of course that yes :).

[puiu]

- this solutiion *.COD.bcb is ok for all hybrid M1.5.5 in alfa romeo ( not to opel !!1).
- next must upload ORI file.
145 ORI is 943-0819, 944-0819, 945-0392, 944-2979
- in 146 nor exist M1.5.5 , only ME7.1.1, ORI is 508-2546.
Hi i apreciate your help,
do you have original file for
my ECU :
0 261 204 944
sw 1037359680

best regards

Puiu

[euroscan]

- none,
- only 944-0819 or 944-2979.

[puiu]

- none,
- only 944-0819 or 944-2979.
It is posible to read from my ECU ?
Another question,if i read only eeprom is posible
to make immo off ?

br

Puiu

[jfiljak]

Alfa 145 1.4 TS ECU m 1.5.5 Hybrid immo problem.
I've got all instructions and dunp but we Galletto the connection will not do wraite, an error 9
Does anyone know why

[jfiljak]

Does anyone know whether the problem is Galletti, or in ECU because the ECU is going DETECT but Wraite not going Eror 09
18-8-10 pin 12V (13V) K line 11 pin

thanks

[columbo25]

Hi, :hello:

take a look at this post, may it would help you !

cheers
columbo25

http://www.digital-kaos.co.uk/forums/f178/immo-off-alfa-156-1-6-16v-0261-204-731-m1-5-5-a-190100/index2.html


Ok guys, have got the Galletto working and have some results.
1/ The earthing of the eeprom pin is to make ecu think there is an empty memory. ie virgin.
2/ Ground the pin as shown and supply +13.5 volts (ignition), you can remove ground immediately.
2/ The eeprom eraser file is programmed in and the power remains on.
3/ The power is removed then applied again.
4/ The ground to eeprom is applied and ecu power applied.
5/ The .ori file is programmed in, I think, with the +13.5v always applied.

No immobiliser is used in this bench procedure.

Galletto pin 7 --- ecu pin 11
" " " 4--- ecu case
" " " 16 --- +13.5v

+13.5v --- ecu8, 17, 18, 10, (switched)

This method should work with kwp2000 also. I'll try and let you know.
Tony


NB latest info is that I cannot yet test on the bench whether the immo off is operational or not. It certainly scrubs the eeprom to some extent, but unable yet whether it truly removes the immo or virginises it -- or either. Cant get the virtual engine to work with it.

File loading works with KW2000 ok.


T.

[jfiljak]

Hi, :hello:

take a look at this post, may it would help you !

cheers
columbo25

http://www.digital-kaos.co.uk/forums/f178/immo-off-alfa-156-1-6-16v-0261-204-731-m1-5-5-a-190100/index2.html
Thanks I'll try and let you know.

Hello

[tdicustoms]

Can anyone help with immo off for alfa M1.5.5
This Number 0 261 204 944