I need Hino eXplorer diagnostic software?Please!

[AlexChen]

Is any can share HINO eXplorer Diagnostic software 2.0.3 or 2.0.4 International verson?
I have a 300 serial bus can't communication.
I guess maybe the 2.0.3 or 2.0.4 can do .
Thanks your help

here is the Nexiq usb link software share
http://rapidshare.com/files/409522814/USBLinkDriver_4.2.zip

[joshplianfield]

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/388207864/Hino.rar)

also make sure you thank superc0 if you see one of hos posts itwas his upload.

http://www.digital-kaos.co.uk/forums/f123/hino-explorer-download-98024/index2.html

this is the original thread here in case you need passwords or something.

[hoitekw]

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/388207864/Hino.rar)

also make sure you thank superc0 if you see one of hos posts itwas his upload.

http://www.digital-kaos.co.uk/forums/f123/hino-explorer-download-98024/index2.html

this is the original thread here in case you need passwords or something.
hello joshplianfield i dowload hino but can not conect with usb nexiq do you have driver for it thank

[joshplianfield]

hello joshplianfield i dowload hino but can not conect with usb nexiq do you have driver for it thank

I do have the driver, did you look in the fourm I referenced? There was a link there, perhaps its dead now?

[joshplianfield]

heres a new link, just load the ISO into a virtual drive and run the install file, install it and it will ask you if you want the hino drivers.

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://www.rapidshare.com/files/409681461/NexiqUSBCD.iso)

[hoitekw]

heres a new link, just load the ISO into a virtual drive and run the install file, install it and it will ask you if you want the hino drivers.

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://www.rapidshare.com/files/409681461/NexiqUSBCD.iso)

thank very much joshplianfield so do you have reprogram of hino i set up hino software but dont have reprogram

[freespinner]

i'm new here and have no idea what to do....
please help me.

[joshplianfield]

thank very much joshplianfield so do you have reprogram of hino i set up hino software but dont have reprogram

No reprogram manager, To be honest I have never even used Hino software, I only ended up with it because someone on here helped me and they were looking for Hino so I did some hunting and found someone else with it and shared.

[hoitekw]

No reprogram manager, To be honest I have never even used Hino software, I only ended up with it because someone on here helped me and they were looking for Hino so I did some hunting and found someone else with it and shared.

thank very much joshplianfield if you need any i will help

[atetruckrepair]

can anyone help me with hino pass

Thank's Bill

[gtmech]

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/388207864/Hino.rar)

also make sure you thank superc0 if you see one of hos posts itwas his upload.

http://www.digital-kaos.co.uk/forums/f123/hino-explorer-download-98024/index2.html

this is the original thread here in case you need passwords or something.

what hardware interface will work with this? ELM327 maybe?

[joshplianfield]

what hardware interface will work with this? ELM327 maybe?

Nexiq USB link

[carlu78]

yes my friend atetruckrepair i can help you..send me a pm...greentings

[gtmech]

Nexiq USB link

cheers buddy

[lordcontrra]

gracias amigos por compartie

[atetruckrepair]

anyone got newer hino soft there willing to share? this is 06 be nice to get 2010

[Dreamer]

click and read please

http://www.digital-kaos.co.uk/forums/f166/urgent-stop-posting-auto-software-155468/

[atetruckrepair]

hey dreamer can we post comercial]industrial and agg soft? or are you referring to all soft? please clarify this is a commercial thread

Thank's Bill

[jkalil]

How I can configure Hino Diag-Explorer to use by Nexiq or IC4 scan-tools? . Thanks

[atetruckrepair]

load your nexiq disc and install hino drivers

[sattv1244]

somebody have hino kg pm me please

[joshplianfield]

has anyone succesfully used this with Nexiq usb link? I am, for the first time, trying to use it and don't know how to tell it to connect.

[joshplianfield]

has anyone succesfully used this with Nexiq usb link? I am, for the first time, trying to use it and don't know how to tell it to connect.

Ok, I installed hino on another pc (version 2.03) and now it communicates when I choose DTC's it does communicates enough to pull codes (the lightening bolt is in the lower left), how do I connect and see parameters like throttle, cruise etc?

thanks,
Josh

[carlu78]

Ok, I installed hino on another pc (version 2.03) and now it communicates when I choose DTC's it does communicates enough to pull codes (the lightening bolt is in the lower left), how do I connect and see parameters like throttle, cruise etc?

thanks,
Josh

hi josh...when you conect to vehicule the first thing show is dtc....if you won see parameters,make modifications,make test you most push in system fix after load...
greeetings...:ridinghorse:

[joshplianfield]

hi josh...when you conect to vehicule the first thing show is dtc....if you won see parameters,make modifications,make test you most push in system fix after load...
greeetings...:ridinghorse:

by chance might you have screen shots?

I have 2 shots here for you

this is my first screen as soon as I load hino

http://img.photobucket.com/albums/v462/joshandlauri/hino1.jpg

this is the one after I connect and get codes, see the little connection lightening bolt is not there anymore.

http://img.photobucket.com/albums/v462/joshandlauri/hino2.jpg

also how do I clear codes?

[carlu78]

by chance might you have screen shots?

I have 2 shots here for you

this is my first screen as soon as I load hino

http://img.photobucket.com/albums/v462/joshandlauri/hino1.jpg

this is the one after I connect and get codes, see the little connection lightening bolt is not there anymore.

http://img.photobucket.com/albums/v462/joshandlauri/hino2.jpg

also how do I clear codes?remember my friend if you dont push system fix you cant doit anything in system because dont have conection again with ecm...remember...when you pulse system fix(up side on left in second image)the program charge image of the ecm in laptop....like insite......greetings

[bowbow]

If you are looking for diagrams and P codes ect and step by step guided repairs try navigate around this area in you installed directory and you will uncover some handy goodies

C:\Program Files\HinoServiceApplications\Fleet\HELP_FILES

Hust click on the file that suits the truck engine you need.

Any one have a japan version of Hino DX or simular

[joshplianfield]

remember my friend if you dont push system fix you cant doit anything in system because dont have conection again with ecm...remember...when you pulse system fix(up side on left in second image)the program charge image of the ecm in laptop....like insite......greetings from venezuela:wavey:

i must be dumber than i think, is "system fix" a option I click on? how do I find it? i checked all sidebar and menu options.

again sorry if there is something obvious here but I am lost.

Josh

[carlu78]

i must be dumber than i think, is "system fix" a option I click on? how do I find it? i checked all sidebar and menu options.

again sorry if there is something obvious here but I am lost.

Josh

relax my friend....if you see the second shot you send in the top on left side you can see system fix...just push it...then the system make another conection whit ecm and charge a image on it...this left you doit anything in system like make test and see parameters...and more.....

greetings....:wavey:

[joshplianfield]

relax my friend....if you see the second shot you send in the top on left side you can see system fix...just push it...then the system make another conection whit ecm and charge a image on it...this left you doit anything in system like make test and see parameters...and more.....

greetings....:wavey:

thanks, i think I got it now.

greetings from USA:wavey:

[jtr8178]

by chance might you have screen shots?

I have 2 shots here for you

this is my first screen as soon as I load hino

http://img.photobucket.com/albums/v462/joshandlauri/hino1.jpg

this is the one after I connect and get codes, see the little connection lightening bolt is not there anymore.

http://img.photobucket.com/albums/v462/joshandlauri/hino2.jpg

also how do I clear codes?

Also, you can't clear an active code until you fix the problem.

[mecaniquito]

:hmmmm2:hi all can help me with the password please hino diagnostic with this user id: admin will thank you with all my heart

[inetden]

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/388207864/Hino.rar)

also make sure you thank superc0 if you see one of hos posts itwas his upload.

http://www.digital-kaos.co.uk/forums/f123/hino-explorer-download-98024/index2.html

this is the original thread here in case you need passwords or something.

thank you buddy!

[nycautodiags]

Hi Guys:
Maybe you can help me....I have a Nexiq Magikey Pdm I have been using..and is very reliable...I wanted to know..if there is anyway i can use this interface with Hino Explorer Diags? is there a driver i can use? or am i forced to Upgrade to New Nexiq Usb link interface? let me know...thanx

[atrellum]

al instalar el software me dice que no estan los drivres instalados como solucionar este problema? gracias a quien pueda ayudarme con esto

[nycautodiags]

Hi guys:
I have a quick question???
Could one of you Kindly tell me ...which is the correct Nexiq Usb link Adapter Interface to use when working on a hino truck....Im being told it is the same as the Isuzu Idss Adapter...but when i read all the forums ....the Nexiq Adapter Pn#'s dont match up.....thanx

[atetruckrepair]

nexiq has one usb link obd connector 448013

[jkalil]

Please share pinout scheme from Nexiq 448013 cable.. Thanks

[deepbase]

Hi guys, I'm trying to get Hino explorer working but I'm having some trouble. I am running 2.02 and I cant seem to get a connection.

I see many people have posted that the USB Link needs the 448013 connector to work correctly (which I don't have). I've tried both my 444009 and the deutch connector (this Hino has both, its a 2005 185) and I cant get any connection thru Explorer. The weird thing is when I run the Nexiq Device Tester, it is seeing the engine and transmission transmitting data on J1939 and the off board diagnostics and Brake Unit on the J1708 with both connectors. We've tried running our own wires to the obd connector with a pin out for 448013 that was posted on another post by DonL but no luck.

My USB Link drivers are the latest and are seen by Hino Explorer. When I check the communication settings in Explorer, it says that the only protocols supported are ISO9141 and ISO14230, but no mention on J1939 or J1708.

Am I missing something here? Any one have any hints?

Thanks guys.

[harshini]

What is that Hino eXplorer diagnostic software.. For what we can use that software??

[kunzme]

Hi guys, I'm trying to get Hino explorer working but I'm having some trouble. I am running 2.02 and I cant seem to get a connection.

I see many people have posted that the USB Link needs the 448013 connector to work correctly (which I don't have). I've tried both my 444009 and the deutch connector (this Hino has both, its a 2005 185) and I cant get any connection thru Explorer. The weird thing is when I run the Nexiq Device Tester, it is seeing the engine and transmission transmitting data on J1939 and the off board diagnostics and Brake Unit on the J1708 with both connectors. We've tried running our own wires to the obd connector with a pin out for 448013 that was posted on another post by DonL but no luck.

My USB Link drivers are the latest and are seen by Hino Explorer. When I check the communication settings in Explorer, it says that the only protocols supported are ISO9141 and ISO14230, but no mention on J1939 or J1708.

Am I missing something here? Any one have any hints?

Thanks guys.

I am trying the same thing with a MagiKey PDM I can see engine and brake ecu but can not communicate. I guess there is no fix for this?

[rp1210a]

Hino explorer software connects to interface via j2534 so nexiq usb link is one of very few working choices (nexiq magikey will not work).

Engine data is not available via j1708 or J1939 data links.

The pinouts for the 448013 obd cable posted in the other threads are correct and confirmed working.
If you do not want to make you own you can purchase them for $50 from e-Store (http://www.pocketfleetdiagnosticsolutions.com/download.htm)

[kunzme]

Hino explorer software connects to interface via j2534 so nexiq usb link is one of very few working choices (nexiq magikey will not work).

Engine data is not available via j1708 or J1939 data links.

The pinouts for the 448013 obd cable posted in the other threads are correct and confirmed working.
If you do not want to make you own you can purchase them for $50 from e-Store (http://www.pocketfleetdiagnosticsolutions.com/download.htm)
Thanks!! I will get a USB Link

[BEETO]

Hello will this system work with usb link without fuss, thanks

[colonna78]

Hello, I have conect Hino Xplorer with nexiq usb link, and i have made my own conneccion using 9 pin Deutsch. If any one need help with this...

[joshplianfield]

Anyone have a link or source for hino 3.0, I have a hino everytime I tried to do a regen I get an error.

I have hino 2.03 that is good until 2008, and my truck is a 2008 so I think it may be a sw issue?

[colonna78]

I?m looking for Hino 3.0 too

[anoriega]

Anyone have a link or source for hino 3.0, I have a hino everytime I tried to do a regen I get an error.

I have hino 2.03 that is good until 2008, and my truck is a 2008 so I think it may be a sw issue?

its no my work, but you can download,,,

[pbateman]

hello fellow dk friends have this posted under truck utilities but your more than welcome to check out the links all the programs work just Pm me for the password.

http://www.digital-kaos.co.uk/forums/attachments/f168/98291d1326678361-truck-utilities-dk-members-truck-programs.txt

[lsinc1]

Does anyone have the solution for Hino 3.0? Thanks in advance.

[pbateman]

lsinc1 check out postabove yours follow the link you'll find what you need

[lsinc1]

I tried the Hino links in the above post. The first link downloaded but the second part would not-even after several tries.

Does anyone know of another way to obtain the keygen or crack for hino dx 3.0? Thanks in advance.

[pbateman]

lsinc1 send me a pm and I will be more than willing to help you

[kenwood727]

lsinc1 send me a pm and I will be more than willing to help you


***305;need all truck software help me plase ...

by kenwood

otoelektronikservice@hotmail.com

[tonyspamone]

lsinc1 send me a pm and I will be more than willing to help you

I tried sending you a pm but is says you are not receiving any pms. Can you help me with a hino 3.0 installation?

Thanks in advance

[lsinc1]

Hi pbateman, I tried to PM you but could not. Do you have the ability to PM me for Hino 3.0 solution? Thanks.

[toolking]

Does anyone have the Hino diagnostic software that they could share with me along with the password to unlock it .Please email here or at ( no addys :rulez: )
Thanks in advance
ED

[tonyspamone]

lsinc1 send me a pm and I will be more than willing to help you

Are you accepting pm yet. I tried to pm you several times and you have it turned off

Thank-you

[joecool2614]

cn anyone help me with ud pass E23D 0E2E 0CF4 DE09 63 thanx

[kaomde]

Hi all
does anyone have a trial or even expired license file for Hino 3.0?
Please PM me
I've some ideas what to do with it.
Those who'll send will get the result in a case of success!
Thanks

[SteveOFF]

Hi all
does anyone have a trial or even expired license file for Hino 3.0?
Please PM me
I've some ideas what to do with it.
Those who'll send will get the result in a case of success!
Thanks

Should you find some please pm me, I would also like to help and have a freind who can be of great assistance.
If possible pm me if you get old/expired/revoked or working licence.
Thanks in advance!

[ortiz]

thanks everyone for share this software

[sync79]

share version 3.0.6 or 3.0.9?

[sync79]

Seeking a more recent version of the program

[toribio]

me too, please some one share it

[sync79]

Install program
Install "HinoDXRM30up.exe".
Run "Hino Diagnostic eXplorer" and send me HWID
I will send back "license.reg", double click to import it into registry

[sync79]

me too, please some one share it
test
good luck

[tonyspamone]

Install program
Install "HinoDXRM30up.exe".
Run "Hino Diagnostic eXplorer" and send me HWID
I will send back "license.reg", double click to import it into registry

Thanks for the program. Can you please send me the "license.reg" file.

Thanks

Tony

[sync79]

Thanks for the program. Can you please send me the "license.reg" file.

Thanks

Tony

lol:beerglass:

[tonyspamone]

lol:beerglass:
I extracted the file but it is the same size as the program file itself. I don't think this is the license file. I installed it and it asks for file for 1059-12D0-44DD-0802-25F0-82B3-69B3-39D8

Thanks for such a quick reply earlier.

Please help if you can.

Thanks again,

Tony

[sync79]

I extracted the file but it is the same size as the program file itself. I don't think this is the license file. I installed it and it asks for file for 1059-12D0-44DD-0802-25F0-82B3-69B3-39D8

Thanks for such a quick reply earlier.

Please help if you can.

Thanks again,

Tony

license.reg double click to import it into registry

[sync79]

I extracted the file but it is the same size as the program file itself. I don't think this is the license file. I installed it and it asks for file for 1059-12D0-44DD-0802-25F0-82B3-69B3-39D8

Thanks for such a quick reply earlier.

Please help if you can.

Thanks again,

Tony

you what version of software?

[tonyspamone]

you what version of software?

I had 2.0.2 and i installed your version on top of it. I get an error ' failed to call DB DLL' I will remove my 2.0.2 and reinstall your version and retry tomorrow.

Thanks for all your help, I do appreciated it.

Tony

[sync79]

for the release of this version should be
I laid out for the Hino 3.0
reinstall the program and generate a PIN code

[sync79]

for you sattv1244

[tonyspamone]

Has anyone found where the forced regen is in 3.0? It is quite easy to find in 2.0.2 but I can not find it in 3.0

[24Volt]

There is nothing new, show the number ECU....

[tonyspamone]

There is nothing new, show the number ECU....

Thanks, I will try it soon to see if it works on my system

[4ly-syk]

hi, can i have reg.
hwid 105A-E321-735A-8A85-0A41-554A-2460-5929

THANKS!

[sync79]

hi, can i have reg.
hwid 105A-E321-735A-8A85-0A41-554A-2460-5929

THANKS!

check
good luck

[parezoo]

hello fellow dk friends have this posted under truck utilities but your more than welcome to check out the links all the programs work just Pm me for the password.

http://www.digital-kaos.co.uk/forums/attachments/f168/98291d1326678361-truck-utilities-dk-members-truck-programs.txt

Can you please send me the password for the Trucks Programs, i cannot send you a PM.

Thanks.

[vt530]

need reg for
HWID: 1058-4370-A0C4-88FE-D198-22EA-72E0-3A35
Thanks

[sync79]

need reg for
HWID: 1058-4370-A0C4-88FE-D198-22EA-72E0-3A35
Thanks

test
good luck

[pavelcrown]

Hi,need reg for:

1058-F257-16AB-DC8E-3812-3918-A8A4-09C0

[sync79]

Hi,need reg for:

1058-F257-16AB-DC8E-3812-3918-A8A4-09C0

test
good luck

[neonlee]

Hi, need reg for 1059-E37E-37C7-CB46-B655-3918-B042-0DBC

[doloman]

Hi all! Pls Lic key for
5CD3-D214-1A53-873A-6B1A-FE73-0BA8-027D
Thanks in advance

[neonlee]

seems like the diffrences between 2.0 vs 3.0 is just Database and some dll differences i am in the midst of copy HDX 3.0 database to HDX2.0 .. will upload the patch once i have done..:)

[jkalil]

Hi mate, please key for
HWID: 105A-12D0-44DD-0D88-9220-B5AF-4C94-09D5
Thanks in advance

[sync79]

Hi mate, please key for
HWID: 105A-12D0-44DD-0D88-9220-B5AF-4C94-09D5
Thanks in advance
test
good luck

[sync79]

Hi all! Pls Lic key for
5CD3-D214-1A53-873A-6B1A-FE73-0BA8-027D
Thanks in advance
test
good luck

[sync79]

Hi, need reg for 1059-E37E-37C7-CB46-B655-3918-B042-0DBC
test
good luck

[neonlee]

Hi mate ,
It cant work , now the HWID changed to 1059-E37E-37C7-CB46-B655-3918-66A8-0DBC
Can you assist to generate the key again ?
Thanks in advance

[sync79]

Hi mate ,
It cant work , now the HWID changed to 1059-E37E-37C7-CB46-B655-3918-66A8-0DBC
Can you assist to generate the key again ?
Thanks in advance
test
good luck

[sync79]

can somebody share a more recent version of the program

[neonlee]

Here i upload a "hybrid" of my hinoDX , HDX2 with HDX3 database and component
Download HinoDX.rar from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/586r4x)

[neonlee]

Anybody had encountered white smoke issue on HINO K13C ,RPM is UP and down with constant pedal, Turbo has been replaced , injector too, boost sensor also replaced
video as below

http://www.youtube.com/watch?v=qt8XnRsxRfU

[sync79]

Here i upload a "hybrid" of my hinoDX , HDX2 with HDX3 database and component
Download HinoDX.rar from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/586r4x)

tell your password

[sync79]

Check the pressure in the rail
pump must be denso HP0

[neonlee]

tell your password
User name: admin
Password:123

[neonlee]

Check the pressure in the rail
pump must be denso HP0
Yes its HP0 denso, any idea on the issue of this trucks ?

infact that i am unable to test this K13c with HDX2 ..
the HDX3 key you given to me cant work on my computer as the HWID keep changing everytime i restart my computer

[sync79]

SHARE YOU SOFTWARE(install)

[sync79]

User name: admin
Password:123

I understand you have a version of the 3.0.6?

[neonlee]

I understand you have a version of the 3.0.6?
Its version 2, but i merge the library of HDX3.06

[sync79]

Its version 2, but i merge the library of HDX3.06
SHARE YOU SOFTWARE(install) 3.0.6

[vt530]

Please help with reg
HWID: 1057-0000-0000-0806-EAD0-87B9-588D-29F6
Thanks

[sync79]

Please help with reg
HWID: 1057-0000-0000-0806-EAD0-87B9-588D-29F6
Thanks
test
good luck

[toribio]

please help me with the hwid reg
1058-D214-0E53-112D-2118-F837-4DF5-2064
thanks

[sync79]

please help me with the hwid reg
1058-D214-0E53-112D-2118-F837-4DF5-2064
thanks
test
good luck

[sync79]

for you Alxmena
test
good luck

[sync79]

Put their distributions
and then all the only activation request

[alxmena]

I have installed the registry key but it did not work

The program show an error that says THE CURRENT KEY HAS BEEN LOCKED TO A DIFFERENT MACHINE

I intalled the program on windows 7

[mondao]

Please help with reg
105A-4E4B-5E3C-9DAO-74FF-3918-94F4-14F9

[sync79]

Please help with reg
105A-4E4B-5E3C-9DAO-74FF-3918-94F4-14F9
for you
good luck

[sync79]

I have installed the registry key but it did not work

The program show an error that says THE CURRENT KEY HAS BEEN LOCKED TO A DIFFERENT MACHINE

I intalled the program on windows 7
delete this

[alxmena]

I delete the registry key but it does not work

[sync79]

I delete the registry key but it does not work
to me it does not say anything
skrishot error message:banghead:

[xobd]

Hi all! Pls Lic key for
HWID:105A-0000-0000-0800-899C-96D0-1773-25F0
Thanks in advance

[ukge4122]

Hey has anyone tried the Hino Diagnostic Explorer on the Japanese Trucks?

[meporter]

May I have reg for...

HWID: 1059-12D0-44DD-0889-8088-58A5-FD95-39DF

and

HWID: 1058-735C-EECF-E6BD-5C18-3919-09FC-382F

THANKS!

[sync79]

Hi all! Pls Lic key for
HWID:105A-0000-0000-0800-899C-96D0-1773-25F0
Thanks in advance
for you
good luck

[sync79]

May I have reg for...

HWID: 1059-12D0-44DD-0889-8088-58A5-FD95-39DF

and

HWID: 1058-735C-EECF-E6BD-5C18-3919-09FC-382F

THANKS!
for you
good luck :nurse:

[meporter]

for you
good luck :nurse:

Thank you.

1059 is XP Pro works fine

1058 is Win7 Pro not working... after patch still say "Sorry, this software cannot be run without a license key"

HWID: 1058-735C-EECF-E6BD-5C18-3919-069E-382F

Is this a Win 7 problem? It looks like it has generated a new code... sorry i did not notice! May I please have help with this code.

Thanks for any help...

[sync79]

Thank you.

1059 is XP Pro works fine

1058 is Win7 Pro not working... after patch still say "Sorry, this software cannot be run without a license key"

HWID: 1058-735C-EECF-E6BD-5C18-3919-069E-382F

Is this a Win 7 problem? It looks like it has generated a new code... sorry i did not notice! May I please have help with this code.

Thanks for any help...
Win7 Pro 32x or 64x?
I have Win7 Pro 32x works fine

[meporter]

Agree... I re-installed and the code changed... my fault.

HWID: 1058-735C-EECF-E6BD-5C18-3919-069E-382F

May I have fix for this code?

Thanks

[cquique07]

hi there, somebody can generate an id?...

this is my HWID:

1059-12D0-44DD-0802-39F4-D204-FD4C-39D8

thnks in advance

[sync79]

hi there, somebody can generate an id?...

this is my HWID:

1059-12D0-44DD-0802-39F4-D204-FD4C-39D8

thnks in advance
for you
good luck

[sync79]

Agree... I re-installed and the code changed... my fault.

HWID: 1058-735C-EECF-E6BD-5C18-3919-069E-382F

May I have fix for this code?

Thanks
for you
good luck

[cquique07]

thanks for help

[sattv1244]

Install program
Install "HinoDXRM30up.exe".
Run "Hino Diagnostic eXplorer" and send me HWID
I will send back "license.reg", double click to import it into registry


my ID: 105A D214 1A53 080C 7EF4 65FB ED3F 5A75


thanks

[sattv1244]

Install program
Install "HinoDXRM30up.exe".
Run "Hino Diagnostic eXplorer" and send me HWID
I will send back "license.reg", double click to import it into registry


my ID: 105A D214 1A53 080C 7EF4 65FB ED3F 5A75


thanks

[sync79]

my ID: 105A D214 1A53 080C 7EF4 65FB ED3F 5A75


thanks
for you
good luck :nurse:

[sync79]

my ID: 105A D214 1A53 080C 7EF4 65FB ED3F 5A75


thanks
what is your version of the program?

[sattv1244]

what is your version of the program?


3.0ver:captain::captain::captain:

[tonyspamone]

Hi Sync79,

You helped me out before and now I need your help again. Would you be able to provide me with a key for 3.0 hwid 1057-4E4B-5E3C-9DA1-0237-3919-0838-30FD

Thanks so much again,

Tony

[neonlee]

I still have no luck in using HDX3.0 , i'm install it to another PC , Bro Sync79 can you generate key for
105A-444D-6E59-0822-AD20-0D7F-E5FB-0E22

Thanks in advance..

[sync79]

Hi Sync79,

You helped me out before and now I need your help again. Would you be able to provide me with a key for 3.0 hwid 1057-4E4B-5E3C-9DA1-0237-3919-0838-30FD

Thanks so much again,

Tony
for you
good luck

[tonyspamone]

for you
good luck


Thanks so much Sync, I will try and install tonight, thanks again.

[tonyspamone]

for you
good luck

Hi Sync79, Thanks so much for sending me the key but when I installed and ran the program I got error "The current key has been locked to a different machine".

I'm going to uninstall and try again, if i get the same hwid I will try your file again. If it is a different hwid I will have to ask you again. Thanks for helping out.

Tony

[krimpernyc]

Hi NeonLee :)
were you ever able to update databases from Hino 2.03 to 3.0? + Patch?....let me know....would like to try it out.....thanx :)

[krimpernyc]

Hi Guys :)
Can someone explain where i get the Hw id? from???/ so i can send it out for the Hino 3.0 Reg Fix??? thanx

[tonyspamone]

Hi Guys :)
Can someone explain where i get the Hw id? from???/ so i can send it out for the Hino 3.0 Reg Fix??? thanx

When you first start the Hino program after installing the 3.0 update, it will give you this HWID in a window.

[tonyspamone]

for you
good luck


Sorry Sync79, I have uninstalled and reinstalled, it came up with the same HWID but after I install your reg file but it gives me that error " THE CURRENT KEY HAS BEEN LOCKED TO A DIFFERENT MACHINE "

Can you please check to see if you sent me the proper file.

Thanks so much again,

Tony

[sync79]

Tomorrow I'll try to help

[vt530]

HWID: 1056-815A-90F2-24BB-6E09-3918-5EFE-3897 THANKS Please Help

[RSwire]

HWID: 1056-815A-90F2-24BB-6E09-3918-5EFE-3897 THANKS Please Help


Try this my friend, let me know if it works.

[vt530]

Thanks but either the hwid changed or i typed wrong info. here is a screenshot of the number.

[sync79]

HWID: 1056-815A-90F2-24BB-6E09-3918-5EFE-3897 THANKS Please Help
for you
good luck
sorry

[tonyspamone]

Tomorrow I'll try to help

Hi Sync79, any luck with my HWID?

1057-4E4B-5E3C-9DA1-0237-3919-0838-30FD

Thanks so much

Tony

[vt530]

Works great thanks RSwire and sync79

[zds]

Hi Sync79, any luck with my HWID?

1057-4E4B-5E3C-9DA1-0237-3919-0838-30FD

Thanks so much

Tony

---------------------------

[tonyspamone]

---------------------------

Hi ZDS,

I installed your file but I get that error "the current key has been locked to a different machine".
Do you have any idea of what my issue can be, your help would be greatly appreciated.

Thanks

Tony

[tonyspamone]

I uninstalled hino, removed from reg edit and now I have a different HWID.

Can one of you kind guys please supply another license key for my new HWID?
1057-4E4B-5E3C-9DA1-0237-3918-E35C-30FD

Thanks so much to all who have tried to help me and sorry for being such a pain with this.

Tony

[krimpernyc]

Hi Guys:)
I just followed Instructions....and Installed Hino 3.0 + Update + Reboot....Would one of you please set me up with a valid license Key ? thanx for your help

1057-0000-0000-0807-38E4-9B19-93B9-29F1

thanx :)

[zds]

Hi Guys:)
I just followed Instructions....and Installed Hino 3.0 + Update + Reboot....Would one of you please set me up with a valid license Key ? thanx for your help

1057-0000-0000-0807-38E4-9B19-93B9-29F1

thanx :)

try this....

[krimpernyc]

ZDS!!!! thanx so much....worked like a charm....but i didnt realize you still needed to use the older keygen to setup password...but got that covered......thanx again :)

[zds]

I uninstalled hino, removed from reg edit and now I have a different HWID.

Can one of you kind guys please supply another license key for my new HWID?
1057-4E4B-5E3C-9DA1-0237-3918-E35C-30FD

Thanks so much to all who have tried to help me and sorry for being such a pain with this.

Tony

-----------------------------

[tonyspamone]

-----------------------------

Thank-you very much, I will try again tonight.

[tonyspamone]

-----------------------------

ZDS, I installed but once again I get error "the current key has been locked to a different machine"

do you have any idea what I can do to fix this?

I'm sorry but I am getting very frustrated with this netbook. I have installed this before on another laptop and had not had any issue like this before.

any ideas?


Thank-you


Tony

[vt530]

ZDS, I installed but once again I get error "the current key has been locked to a different machine"

do you have any idea what I can do to fix this?

I'm sorry but I am getting very frustrated with this netbook. I have installed this before on another laptop and had not had any issue like this before.

any ideas?


Thank-you


Tony

When you uninstalled did you clear the registry? Try and run regedit then open local machine, hino, auth and delete license see if it comes up with the same hwid. had this issue once and that all i did to fix it.

[KTMAKIAS250]

thank you very much my friend:party:

i was searching for that for a year

[parezoo]

I appreciate the key for this ID please:

1058-0000-0000-0C59-8A78-A5D7-5697-23EB

[vinicio1716]

Hi, I have Runned "Hino Diagnostic eXplorer" and send me, I send you HWID, PLEASE SEND ME LICENSE,
THANK YOU SO MUCH

[zds]

Hi, I have Runned "Hino Diagnostic eXplorer" and send me, I send you HWID, PLEASE SEND ME LICENSE,
THANK YOU SO MUCH

-----------------------

[krimpernyc]

Hi ZDS:)
I crashed the laptop doing a Volvo Ptt Update...Couldnt restore it...could you please give me a New License....

HWID:105A-DEBB-3A8D-0800-9F44-B2B3-0810-4B30

thanx Again...:)

[zds]

Hi ZDS:)
I crashed the laptop doing a Volvo Ptt Update...Couldnt restore it...could you please give me a New License....

HWID:105A-DEBB-3A8D-0800-9F44-B2B3-0810-4B30

thanx Again...:)

----------------------

[vinicio1716]

-----------------------
HI, THANK YOU FOR LICENSE, I HAVE TRIED TO USE IT, BUT APPEAR THIS ERROR: "The current key has been locked to a different machine", what can I do in order to solve this problem.


thanks

[hieu1987]

Dear sync79,
Thank you for guiding,
Please send me "licennse.reg",
HWID: 1059-0000-0000-0802-6014-C3C4-FCE5-35F2.
Best regards,
hieu1987,
vmh1987@yahoo.com.vn (vmh1987@yahoo.com.vn)

[zds]

Dear sync79,
Thank you for guiding,
Please send me "licennse.reg",
HWID: 1059-0000-0000-0802-6014-C3C4-FCE5-35F2.
Best regards,
hieu1987,
vmh1987@yahoo.com.vn (vmh1987@yahoo.com.vn)
try this
-------------------------------

[krimpernyc]

----------------------


ZDS!!!!! thanx !!! works Awesome !!!

[tonyspamone]

When you uninstalled did you clear the registry? Try and run regedit then open local machine, hino, auth and delete license see if it comes up with the same hwid. had this issue once and that all i did to fix it.


Thanks I will try that

Tony

[tonyspamone]

Thanks I will try that

Tony

Ok I tried removing from reg edit one more time and now I get another different HWID.

Please post a license file for
1057-4E4B-5E3C-9DA1-0237-3919-1AE8-30FD

[zds]

Ok I tried removing from reg edit one more time and now I get another different HWID.

Please post a license file for
1057-4E4B-5E3C-9DA1-0237-3919-1AE8-30FD

try this////

[tonyspamone]

try this////

Sorry ZDS, it still does not work it says key locked to a different machine.

I've tried 5 times now and same error

[tonyspamone]

try this////

ZDS, I am going to try one last time, i deleted the HWID in regedit again. here is the new HWID
1057-4e4b-5e3c-9da1-0237-3919-3ad0-30fd

[lsinc1]

I need a lisence for Hino 3.0 here is my HWID

1059-0000-0000-0887-EEA0-2208-78D9-35E4

Thanks in advance

[zds]

ZDS, I am going to try one last time, i deleted the HWID in regedit again. here is the new HWID
1057-4e4b-5e3c-9da1-0237-3919-3ad0-30fd

try to edit value of the register manually from reg file with regedit

[zds]

I need a lisence for Hino 3.0 here is my HWID

1059-0000-0000-0887-EEA0-2208-78D9-35E4

Thanks in advance

-------------------------

[lsinc1]

Thanks for reg file but now I get an error when opening it says

FAILED TO CALL DB DLL

cAN ANYONE HELP? tHANK IN ADVANCE

[tonyspamone]

try to edit value of the register manually from reg file with regedit

Really sorry to bug you but I know where in regedit the Hino Auth is but I'm not sure what values to change or change it to. Do you have any way to teach me?

Thanks in advance,


Tony

[zds]

Really sorry to bug you but I know where in regedit the Hino Auth is but I'm not sure what values to change or change it to. Do you have any way to teach me?

Thanks in advance,


Tony
open license.reg file with wordpad and you will find what value you need change

try to run license.reg file fist. maybe the program will work

[vinicio1716]

HI, PLEASE HELP ME, MY HWID:
1058-4E4B-5E3C-9DA0-80DB-3918-EE74-36F9

THANK YOU SO MUCH

[zds]

HI, PLEASE HELP ME, MY HWID:
1058-4E4B-5E3C-9DA0-80DB-3918-EE74-36F9

THANK YOU SO MUCH
---------------------------

[lsinc1]

Happy Holidays!! Please help with lisence for
HWID:1059-0000-0000-0887-EEA0-F7A8-8EA4-35E4

Thanks in advance

[zds]

Happy Holidays!! Please help with lisence for
HWID:1059-0000-0000-0887-EEA0-F7A8-8EA4-35E4

Thanks in advance

______________________________

[tonyspamone]

open license.reg file with wordpad and you will find what value you need change

try to run license.reg file fist. maybe the program will work

Thanks ZDS I will try that and let you know.

Tony

[drizzt4321]

sync79, hopefully you can help.

Machine HWID: 0058-12D0-44DD-082A-4490-DF90-3D99-8BDE

Thank you much!

[drizzt4321]

sync79, hopefully you can help.

Machine HWID: 0058-12D0-44DD-082A-4490-DF90-3D99-8BDE

Thank you much!

Or thank you to ZDS in advance as well! :)

[drizzt4321]

bumping up.... Thanks! :)

[drizzt4321]

Please, please, please with sugar on top?

[ddtech]

can some1 please upload the link agian, for hino and eztech mini! thanks

[hardworkn]

Can anyone assist me with hino explorer 3.0
HWID 0058-12D0-44DD-082A-2A2C-FA93-75E2-8BDF

Thank you

[zds]

Can anyone assist me with hino explorer 3.0
HWID 0058-12D0-44DD-082A-2A2C-FA93-75E2-8BDF

Thank you

-----------------------

[hardworkn]

Accepted reg file all good there. Question is I upgraded from a older version and was able to get newer version. The default username is still ADMIN but password has changed. Any ideas? **

^^^^^^^ Ok got that handled hopefully last issue. login and then it shows error of "failed to contact DB.DLL"

[cabby176]

hwid 0058-CFA4-F3A4-080B-938C-5AAB-F552-2662 can you help me with this please

[zds]

hwid 0058-CFA4-F3A4-080B-938C-5AAB-F552-2662 can you help me with this please

---------------------------

[hardworkn]

UPON LOGIN it shows error of "failed to contact DB.DLL" Anyone have any ideas? V3.0

[nycautodiags]

Hi ZDS :)
Any chance you could help me with this Hino 3.0 License?

HW ID : 105A-DEBB-3A8D-0800-9C6C-0270-604B-4B31

thanx for any help you can give me....:) thanx

[zds]

Hi ZDS :)
Any chance you could help me with this Hino 3.0 License?

HW ID : 105A-DEBB-3A8D-0800-9C6C-0270-604B-4B31

thanx for any help you can give me....:) thanx
-----------------------

[nycautodiags]

Hi ZDS :)
YOu are Awesome !!!!!

[nycautodiags]

Hi Zds:)
Im sorry to bother you....i had Hino working great after you gave me the new license...I had installed Volvo Ptt 1.12...After all the Updates were done....laptop restarts and crashes....no way to recover...had to rebuild all the Software....could you give me another Hino V3.0 License
HWID# 1057-0000-0000-0817-B418-2B19-91F6-29F4....

thanx again..... :)

[zds]

Hi Zds:)
Im sorry to bother you....i had Hino working great after you gave me the new license...I had installed Volvo Ptt 1.12...After all the Updates were done....laptop restarts and crashes....no way to recover...had to rebuild all the Software....could you give me another Hino V3.0 License
HWID# 1057-0000-0000-0817-B418-2B19-91F6-29F4....

thanx again..... :)

-----------------------------

[nycautodiags]

Hi Zds :) again you are a lifesaver....
I have a question for you...i want to create a backup recovery image of my tech laptop...so if it crashes i can just use the image to bring it back to working order....have you done this? i have tried before and some programs lose license....(caterpillar + Detroit Diesel )???
any ideas? thanx

[nycautodiags]

Hi:)
Could someone help me with a hino license ?
HWID# 0058-12D0-44DD-0800-8E10-067B-4F11-8BD8
Thanx

[zds]

Hi:)
Could someone help me with a hino license ?
HWID# 0058-12D0-44DD-0800-8E10-067B-4F11-8BD8
Thanx
------------------------187893

[carlu78]

hello zds..can you help me please???HWID...005A-0000-QA00-0D4D-5D04-4370-49AB-3444..thanx in advance

[sattv1244]

Hino Diagnostic eXplorer & Reprog Manager 3.0 | Nexiq USB-Link | Truck Diagnostic Solutions (http://www.specdiag.com/hino.html) who has 3.1.2 ?

[whisky2510]

help me please need a license for hino 3.0 my HWID: 5C89-4E4B-5E3C-9DA0-E387-3919-7B1E-88FA thanks in advance

[whisky2510]

help me please need a license for hino 3.0 my HWID:5C89-4E4B-5E3C-9DA0-E387-3919-7B1E-88FA thanks in advance again

[mentos]

Hi, pls help me licence key : HWID 1058-B874-E95A-0FD6-0A80-87C2-AB8F-2D9F

Thank you !

[nycautodiags]

Hi Zds :)
Sorry to bother you.....any chance you could issue me a Hino v3.0 license....???
HWID: 105A-D214-1A53-0889-31EC-FEFB-1C01-5A75

thanx for all your help :) You have been a lifesaver more than once....

[whisky2510]

hi zds can you help please need a license for hino 3.0 my HWID:5C89-4E4B-5E3C-9DA0-E387-3919-7B1E-88FA thanks in advance

[zds]

hi zds can you help please need a license for hino 3.0 my HWID:5C89-4E4B-5E3C-9DA0-E387-3919-7B1E-88FA thanks in advance DepositFiles (http://dfiles.ru/files/41dw914s0)

[bekamon]

hello , please help me whit this HWID: 105A-12D0-44DD-0818-F1EC-6408-7D16-09DE

[carself]

HWid: 1059-12d0-44dd-0889-35c4-6e86-f96a-39df
many thanks!!!

[carself]

Who can help?

[zds]

HWid: 1059-12d0-44dd-0889-35c4-6e86-f96a-39df
many thanks!!!
DepositFiles (http://dfiles.ru/files/ih9hzz22k)

[Roy Suryadwiananda]

Apparently many of people have to say here for Licence.reg, then I also requested. My HWID :1058-4E4B-5E3C-9DA0-EA7B-3919-1A4E-36FA
Please help Licence. Reg for me, thank you.

[Roy Suryadwiananda]

Please zds, help us for my licence.reg Hino.
Thanks.

[RAULIN]

hi my friends I need your help again ,I am trying to license and register hino version 3.0 my HWID: 1059-D214-4455-0889-89C0-FCF1-69A4-2B35 THANKS IN ADVANCE FOR YOUR HELP

[marcover]

Hello Friends, someone can help me with HDID: 1057-8270-7450-9504-9C48-3918-9DC6-396C
Thanks in advance!

[jackalfa]

Hello Friends, someone can help me with HDID: 1057-8270-7450-9504-9C48-3918-9DC6-396C
Thanks in advance!

255076

Enjoy

[jackalfa]

Please, anyone knows how to fix this error:

"This software does not accept more hardware changes."

thanks...

[pancabenua]

Hi, please help me with Hino Reprog manager and Hino diag HWID : 1056-815A-96EA-6938-2A03-3918-A4B6-389A

many thanks, Brother...

[Roy Suryadwiananda]

Hi, can i have reg.
HWID: 1058-4E4B-5E3C-9DA0-EA7B-3918-4FB4-36FA
Please help us and thank you.

been resolved

[whisky2510]

hi i need license for hino please my hwid: 0058-12D0-44DD-082A-1758-8475-46D8-8BDE thanks in advance

[Roy Suryadwiananda]

hi i need license for hino please my hwid: 0058-12D0-44DD-082A-1758-8475-46D8-8BDE thanks in advance

You try,
Name: tes
Company: tes
Key: 3B971185-18C854F9-FE93E213-52ADD71F-0912C232-6D21177D-1621

[whisky2510]

is for hino 3.0?

[Roy Suryadwiananda]

is for hino 3.0?

Yes Sir...............
From this site > http://www.obddiagnosticcenter.com/news/free-download-hino-dx-pin-code-keygen-and-hino-dxrm-generator-a-670.html
its work fork for my obd.

[whisky2510]

said the current key has been loaded to a different machine

[whisky2510]

how clear the registry?

[Roy Suryadwiananda]

how clear the registry?

Run > regedit > HKey_Local_Machine > Software > please you look for Hino folder > and delete this folder > exit
With CCleaner software , you run cleaner.....try this
Woouw ....before the step above , you must be uninstall software Hino and then after that you run step above, reinstall again Hino sofware.

[whisky2510]

again my hwid is the same but I put the license and tells me the same

[whisky2510]

this work with windows xp

[whisky2510]

can you give me other license with the same numbers hwid: 0058-12D0-44DD-082A-1758-8475-46D8-8BDE

[Roy Suryadwiananda]

can you give me other license with the same numbers hwid: 0058-12D0-44DD-082A-1758-8475-46D8-8BDE

not I can, I don't know.

[Roy Suryadwiananda]

can you give me other license with the same numbers hwid: 0058-12D0-44DD-082A-1758-8475-46D8-8BDE

0058-12D0-44DD-082A-1758-8475-46D8-8BDE

[whisky2510]

thanks this work now,but reprograming call for password

[Roy Suryadwiananda]

thanks this work now,but reprograming call for password
try this > HNJPNA61300116 or this > EEEEB5CE-DE0FE573-F7EECAA9-F725E92F

[whisky2510]

said user id : admin
password: ?

[Roy Suryadwiananda]

said user id : admin
password: ? >>>>> EEEEB5CE-DE0FE573-F7EECAA9-F725E92F
PIN >>>> HNJPNA61300116

[jeepunlimited80]

Hey guys,
Does anyone have a current version of this program i can download?

Thanks.

[Roy Suryadwiananda]

Hey guys,
Does anyone have a current version of this program i can download?

Thanks.

>>is on this thread, please read for each page of the existing, or in this > http://www.chinaautodiag.com/download/hino.zip

[jeepunlimited80]

The link at the begining of the thread no longer works. My browser says that the link you provided has malware. Any ideas?
Thanks.

[Roy Suryadwiananda]

The link at the begining of the thread no longer works. My browser says that the link you provided has malware. Any ideas?
Thanks.

Link above is file zip for download software Hino , please disable protection for you browser until download finnished and enable again you protection.

[trifkes]

Install program
Install "HinoDXRM30up.exe".
Run "Hino Diagnostic eXplorer" and send me HWID
I will send back "license.reg", double click to import it into registry

Thank you bro

[trifkes]

Link above is file zip for download software Hino , please disable protection for you browser until download finnished and enable again you protection.

HWID: 1057-237B-8730-0132-B6F1-3A45-AAD7-3136

[Roy Suryadwiananda]

HWID: 1057-237B-8730-0132-B6F1-3A45-AAD7-3136

please try this :
Name: test2
Company: test2
Key: C6A1387A-0BBA69F8-DE562D66-DA91769B-5E1041DD-FD8DD8DC-6E28

[trifkes]

363067
please try this :
Name: test2
Company: test2
Key: C6A1387A-0BBA69F8-DE562D66-DA91769B-5E1041DD-FD8DD8DC-6E28


I still cannot start Hino Diagnostic

[Roy Suryadwiananda]

363067


I still cannot start Hino Diagnostic

Name: test2
Password: BA288566-98C9758B-3D347A81-0D29490F
PIN : HNJPNA61300116