VW Passat B7 Odometer Adjust. Need help

[pawliukazz]

Hi guys :)

So i need to change the mileage for:
Passat B7
Year 2007
Cluster VD1
3C0 920 871X
Eprom 24C32

Oroginal KM is: 183769, File is attached.
The point is I tried nyo 4, tachosoft, but the result is the same: As many times i try it goes to 183000 no less.... I think it may be calculator because nyo 4 i select 3C0 920 870G (IT does not have other option except the last letter of part number)

Also i thought maybe the EDC16 needs to be modified too but that's just a thought, you probably know better than me :D

I will be thankful for any help :) Cheers! :beer:
P.S. If someone will edit the odometer, then it would be great if it would be somewhere around 110000 km :)

[tachonow]

Km change only by obd with right tools.

[super jumbe]

Hi Mate
You need Vad Dash Prog from Smelecom it does what it says on the tin.
:thrasher:

[pawliukazz]

I have tacho 2008 it doesn't have passat B7 as an option. And super vag k+can and vag k+can commander only reads odometer, when i try to change it, it fails....

[zorok]

User R250 its working :)

[pawliukazz]

Thanks for your replys, now i understand that i won't be able to do that because i don't have the right tool. I discovered that this cluster has some kind of protection which i can't pass... :)

[polat]

R250 24C32 AND CDC 3217G AND CDC3297G THERE

OK

[pinky1970]

I DID A PASSAT B7 THE OTHER WEEK WITH TACHO 2008, HERE IS HOW I DONE IT WITH CABLE 23 AND CAN DONGLE. TACHO ONLY SHOWS UPTO B6 , BEFORE TRIED AUTO DETECT NO GOOD,DID IT SHOWING GOLF 5.

IT DID TAKE A WHILE ABOUT 2 MINUTES ON SCREEN SAYING WORKING JUST LEFT IN AND CAME UP TEST AND WENT BACK TO MAIN SCREEN.

I HOPE THIS HELPS YOU.:barscarf:

[pawliukazz]

I DID A PASSAT B7 THE OTHER WEEK WITH TACHO 2008, HERE IS HOW I DONE IT WITH CABLE 23 AND CAN DONGLE. TACHO ONLY SHOWS UPTO B6 , BEFORE TRIED AUTO DETECT NO GOOD,DID IT SHOWING GOLF 5.

IT DID TAKE A WHILE ABOUT 2 MINUTES ON SCREEN SAYING WORKING JUST LEFT IN AND CAME UP TEST AND WENT BACK TO MAIN SCREEN.

I HOPE THIS HELPS YOU.:barscarf:
So you are saying it can be done, but you just need to select GOLF 5 in menu?? Well it's gt8 news for me then :DD

[exe123]

Will never for for dashs after 6/2006

[pinky1970]

It wont hurt to try, all i know is i did a b7 with Tacho 2008 and it worked with golf 5 in menu. maybe EXE123 is right.

but today tried Touareg 2006 with Sharan 2000 cable and Tacho would not read it, so im going to have to take the dash out and program 24c16 eeprom, hopefully fingers cross.

But if you have Tacho, it wont hurt to try Gof 5 menu. Im only trying to help EXE123.

[motorsport]

Hi guys :)

So i need to change the mileage for:
Passat B7
Year 2007
Cluster VD1
3C0 920 871X
Eprom 24C32

Oroginal KM is: 183769, File is attached.
The point is I tried nyo 4, tachosoft, but the result is the same: As many times i try it goes to 183000 no less.... I think it may be calculator because nyo 4 i select 3C0 920 870G (IT does not have other option except the last letter of part number)

Also i thought maybe the EDC16 needs to be modified too but that's just a thought, you probably know better than me :D

I will be thankful for any help :) Cheers! :beer:
P.S. If someone will edit the odometer, then it would be great if it would be somewhere around 110000 km :)

i can edit for you if mask is C3272

[frikki]

i did passat 2007 diesel milage the other day using uzi pro.(via obd) less than 2 min.s.

[vagdiag]

i used today first time r250(clone) with passat 2006.08 , tried to make connection with processor half a day by the manual- no connection. At last leaved ostsillator leg open and it worked.

[branimirj]

I work this car with x-prog m.Its not easy but work :)

[vuno01]

Try this one
but i think this one will work

[vuno01]

:banghead::banghead:

[frikki]

friend i think they sorted the car long time already. or maybe car is gone. cheers.

[teerak2uk]

i did passat 2007 diesel milage the other day using uzi pro.(via obd) less than 2 min.s.


Late to post but for future reference towards people who may think about buying this product

Uzi PRO

We do not sale UZI PRO any more due to huge problems with this tool. Manufacturer sales this device with no support and there are a lot of functions that even doesn?t work at all.


Uzi PRO is a brand new version of hand held car code reader for VAG range of cars (VW, AUDI, SEAT, SKODA). It supports almost all control module for VAG cars including the KWP1281 (K-Line), KWP2000 (K-Line), as well as KWP6000 CAN Bus) protocol. It can also change odometer, read anti-theft code, diagnose and program keys.

http://www.cardiag.com/wp-content/uploads/uzi-pro-scks.jpg (http://www.cardiag.com/wp-content/uploads/uzi-pro-scks.jpg)
supports km change of golf 5 2007+ (CDC micronas processor) via obd2 also supports immo pin code extraction from 2007, 2008, 2009 dashboard and ecu via CAN
I: Diagnosis (KWP1281, KWP2000, KWP6000)


information read of control unit
read fault code
clear the fault code
the implementation of component testing
read data stream
the basic setting
control unit coding
matching and adjustment
log in and authorization

II: Odometer Correction(K-line,CAN BUS)



VDO instruments (K-Line and CAN BUS)
Motometer dashboard (K-Line)
Marelli dashboard (CAN BUS)
Bosch dashboard (K-Line)

III: Anti-theft code reader (IMMO1, IMMO2, IMMO3, WFS)



read the password for engine control unit
read password for anti-theft box
read password for dashboard

IV:Key matching



control unit of anti-theft box
the dashboard control unit
Kessy control unit

[frikki]

all i can say is that i phoned the manifacturer the other day, finding out if any updates availible, nothing yet.(had the tool for almost a year) the real nice thing about this tool i can say i can say is that it corrected milage on a golf gti late 2008. the guys using vag dash can in my city failed at it. the reason for the banned, i do not know. overall, i think it is alittle overprized. according to the supplier this tool can code precoded transponder keys to golf 5 without any problem, well i "sukkeld my gat off" doing it on a gti golf 5 the other day. so im not very impressed when it comes to coding keys on the golf5 platform. thinking of purchasing vag dash can soon. but first in the line is original zed bull. returned faulty device today.(china clone) cheers.

[autodiagnostic]

if Passat B6 up year 2007, you can try use Micronas OBD TOOL CDC32XX programmer v1.1.

[milzal]

Buy anybody this micronas v1.1 tool ? If is working good.

[eprommazza]

Buy anybody this micronas v1.1 tool ? If is working good.

the last time the test is done with tag key tool now I have it you buy it and let me know if it works

:burnout:

[leaptochina]

How to download attachement/？？？？

[leaptochina]

thanks for you file