PDA

View Full Version : rt3 magneti mareli peugeot crash soft while upgrade


michalez
22nd August, 2010, 02:20 PM
I crashed software ,when i upgraded rt3 . I think I used the wrong version of firmware . On the screen was the only logo peugeot and title waiting . Turned off the ignition and turned on again and displays the logo in the bottom right corner of the message "flunend (Fiber UNsuccessfull Ending) Płyty CD nie da się inject. Please help if anyone knows how to save software.
Dr. MadMan
25th August, 2010, 10:50 AM
Which version of firmware did you use? Did you wait for CD to come out twice? Usually wrong version won't even start the update. Try to disconnect from battery and leave it off for 10 minutes.
Dr. MadMan
27th August, 2010, 11:30 AM
You can also try to recover with correct upgrade CD. There is Recovey script on it.
Ycsson
1st September, 2010, 11:03 PM
Verifies that the version that you loaded was the correct, Do not be of a vehicle VAN BUS..
michalez
3rd September, 2010, 09:36 PM
where i can find recover script?
Min2xx
28th May, 2015, 08:57 PM
Hello, I have the same problem, please solution?
Samoerai
16th June, 2015, 06:31 PM
hello,


there are 2 versions of psa RT3:VAN and CAN. if you put wrong software upgrade disk the unit will be bricked.

open the unit and take out cd rom verify if you put the rigt sw.


here is a link to see wich unit you have:http://www.ycarlink.com/pd_15917_How-to-check-software-version-of-Peugeot-Citroen-RT3-radios-Van-bus-or-Can-bus-.htm