mitsubishi galant 2000 key

[ezenigbo]

i have this mitsubishi galant 2000,all keys lost,i have searched for immo box in the car but cannot see,the number of the ecu is MR507245 E2T76483 H21 ZC.please help

[toniz]

It must have immobox, usually under steering, close to steering column.
In worst case, follow the wires from Coil.

[Bishop c4]

i have this mitsubishi galant 2000,all keys lost,i have searched for immo box in the car but cannot see,the number of the ecu is MR507245 E2T76483 H21 ZC.please help


Hello, try this: 2949

regards

[ezenigbo]

am not after pin,i want to remove the immo box and do it on the table but cannot see immo box

[ezenigbo]

actually this car dont have immo box,attachedd is the inside of the ecu,it has an ic with 80 legs with this masket OBAOF8J ,any help from that?can the ic be read?can i read with upa and how?

[Bishop c4]

Hello im only a locksmith and always resolv this kind of stuff with pin codes and t-300 may be you need the help of some body more expert, but whith patience some of our mates bring you the help you need.

Best regards.

[marinero123]

actually this car dont have immo box,attachedd is the inside of the ecu,it has an ic with 80 legs with this masket OBAOF8J ,any help from that?can the ic be read?can i read with upa and how?

you must have there one serial eeprom , coding data isn't in mcu that mcu with masket OBAOF8J .

[marinero123]

see at this picture how your is your immo box.

[ezenigbo]

ok,where can i see it in the car?

[ezenigbo]

yes i can now see the immo box exactly the one shown above,now what ic should i read to get the key data?i expected to see 24c01 or 93c--- but this is the no. i found 4949 st9c41 eight legs,and S57780 Sixteen legs,or if i can get the pinouts of the immo with my t300,i can try to program on desk,the car is too far from me,only the immo box and the ecu was brought to me

[toniz]

Can you post both side photos of immo pcb.

[ezenigbo]

attached is the immo box

[toniz]

Isn't that proc HC05B8? If so, the keys are inside.

[ezenigbo]

the following are written on the processor;DJ74 185 SC508973 CPB H44H SSBG0052C,can i read this with upa?

[reks13]

I have some problem, all keys are lost. SBB and T300 cant add key. Tried with 4C, 4D-60, 4D-61
No succees. T300 show error IMMO 11 - transponder not correct.
Tried wait 20 minutes with ignition On, no success.
Pls help me, what exact transponder need? How to program key?

[bram380]

immo eprom x24c01
transponder ID4C

[Digitalmotor]

the following are written on the processor;DJ74 185 SC508973 CPB H44H SSBG0052C,can i read this with upa?





Is it possible to Read Via Upa Programmer

[keygargoil]

1996-2000 is 4c, 2000-2002 is id64 2002-2004 is 4d61 2004+ is id46

[milkatrek]

what pin is correct for H44H immobox. I use 4dID60 and SBB and he cant add key. Communication with immobox is ok. Carmanscan nad launch have pin input and is corect. Who know which one is corect?

[yssf]

Sbb can program key on this car,if you don't use the correct transponder and choosing the correct year it won't work,because sbb select the pincode according the year


Sent from my iPhone using Tapatalk - now Free (http://tapatalk.com/m/)

[keygargoil]

its a hc805p18 processor and it is a 4d64 mit9-pt is the blank with chip you need for obd
up to 2000 is4c
2000-200 is 4d64
2002-2005 is 4d61
2004 + is id46

[ngakson2002]

yes i can now see the immo box exactly the one shown above,now what ic should i read to get the key data?i expected to see 24c01 or 93c--- but this is the no. i found 4949 st9c41 eight legs,and S57780 Sixteen legs,or if i can get the pinouts of the immo with my t300,i can try to program on desk,the car is too far from me,only the immo box and the ecu was brought to me

The IC you have to read is the 44 Pins MCU 68HC05P18 you with the Square shape in this immo

Best Regards

[milkatrek]

I try everything with 4d ID60. After 2000 and before 2000. I have 2000 :)
Maybe must be 4dID64. I will check and send result

[milkatrek]

Its not simple read and write this mcu ;)

4dId64 is for jeep dodge chrysler - it is correct?

[siyadk]

i am almost kind of sure that this vehicle uses id 46 transponder

Is this car Australian made??

[milkatrek]

its from EU

[igorr]

is there in ecu 24c01 on the other side of pcb

[keygargoil]

mate it is 4d64 i have told you twice use a 4d64 and it will program straight in

[milkatrek]

Transponder recognized as Texas Crypto
ID 4D - 60 - JMA TP 06/19
Password: FF - Unlocked
Identifier: 00 - Unlocked
Serial number: 6F611700 - Locked
Secret key: Locked

100% working

closed :)

[siyadk]

Where is your Thanks for those who helped you...at least for keygargoil

[Zbqq]

I have same problem