ECUSafe 1.9.3.0 working

[blackpirate]

hey guys
sup?
another ebay seller will be angry! :P
please test this version of ecusafe and report if works for you!

instructions:
1. install using setup.exe
2. copy dpx_esx.dll into installed dir
3. start the application and check for updates (it will updated to latest version)
4. copy the files from loader folder into installed dir
5. use the ecusafe_1930_loader.exe to start the application

test and report!
http://www.multiupload.com/BICZ885Z1C
Credits:EvOlUtIoN/SnD
Special thnx to Evo and sparpacillon

app its still in testing, so report if works or not!

cheers
BP

[ka-pa-za]

install ok
copy/paste ok.
Loader ok (popup say ecusafe is cracked by.....)
but on startup program say (licensed but unregistrated version. give activation code)

needs activation key to unlock the restrictions

[egyclick]

install ok
copy/paste ok.
Loader ok (popup say ecusafe is cracked by.....)
but on startup program say (licensed but unregistrated version. give activation code)

needs activation key to unlock the restrictions

On my pc:

install ok
copy/paste ok.
Loader ok (popup say ecusafe is cracked by.....)
But that's all, nothing shows up, just like on v1.9.2.0

to good to be true!

By the way what License ID shows on your PC, on mine it shows: EC19-4E3504F0-4C-94-43-5E-28-48-31-14

[blackpirate]

patience, it will be sorted out! ;)

what OS are you running?

[egyclick]

patience, it will be sorted out! ;)

what OS are you running?

I use Win Xp

[GMXcool]

Hi

For me not work
Tested on WinXP and Win7

Regard

[moky]

thx for your work,we test it when your project will be ready

[egyclick]

Hi

For me not work
Tested on WinXP and Win7

Regard

Did it work for you blackpirate (http://www.digital-kaos.co.uk/forums/members/54261-blackpirate/) ?

cheers

[swat cat]

where is it?

[blackpirate]

2 minutes please! ;)

i think its done

[ka-pa-za]

win xp pro sp3
netframe 4

I have other id, than mentionet above..

[swat cat]

it`s baking in the oven? it will be to hot to handle :celticparty:

[conan981]

http://i51.tinypic.com/2v30vvt.jpg

[blackpirate]

i tested on file founded in the forum
tuscon2.0CRDI_EDC16

seems like its working!

btw: the file can be readed using galletto?

[milanoffracing]

Everything working fine, big thanks to you and EvOlUtIoN/SnD.

[pawliukazz]

Thanks! works, but after update avast! antivirus sees ecusafe2.exe as a virus... Is it normal or is it only for me??

When i disable antivir then it works ok :)

[blackpirate]

its false alarm!
its because after update the new ecusafe2.exe its protected!
AV see the protection code as a virus/trojan!

cheers

[ivica]

installation goes fine :D
thank you

[elchip]

Thanks! works, but after update avast! antivirus sees ecusafe2.exe as a virus... Is it normal or is it only for me??

When i disable antivir then it works ok :)
It is OK.And tested live on Peugeot and work 100% in real life for now.

[nabzo]

works well

[egyclick]

works well

a big THANKS to the cracker, good work mate!
I'm curious if EGR off works

[bnad3m]

Not work for me
Install Ok
Copy/past dpx_esx.dll into installed dir,when i start the application, a pop up says " the specified file was not found "
i run win XP sp2

[smirnoff_rules]

sounds like your antivirus has deleted the dll file .. turn it off and try

[pawliukazz]

Not work for me
Install Ok
Copy/past dpx_esx.dll into installed dir,when i start the application, a pop up says " the specified file was not found "
i run win XP sp2
Ignore this message, update to the latest, then copy loader, and run loader...

Same was for me, but afterall it worked ;)

[bnad3m]

thank you smirnoff for the fast reply, anty virus and anti Spyware both turned off but the same problem, i try with virtuel machine but not work

regards

[bnad3m]

Ignore this message, update to the latest, then copy loader, and run loader...

Same was for me, but afterall it worked ;)

yes, i do it but i have this message

[satinfo]

Thanks! works,
everything is ok and work fine. :rock:

[pawliukazz]

yes, i do it but i have this message
It seems that it doesn't reach internet connection.... Do you have firewall or something like that?

If you have, try on a different pc, if it works there, just copy-paste all files back to your pc, should work :)

[yas200979]

Peugeot EDC15 work 100%. Very good. Sanks.

[bmw320d]

Work ok!!!!! Thanks

[blackpirate]

sometimes you get that error! just click OK to continue, then do the update thing!

that doesnt matter , what really matter its that its fully working!
enjoy it!
Please do not try to sale it!

IF ITS CRACKED IT SHOULD BE FREE FOR ALL!


cheers,
BP

[sjonv]

it works here to!

I will test it tommorrow on my on car (caddy 105ps 2008) and will report it.

big thanks

[moky]

very good work black pirate !!!!! many thanksssssss !!!

[servis.draza]

very good ,i check tomorrow on my e class 280 3.2l


thank for all

[adam28]

very good ,i check tomorrow on my e class 280 3.2l


thank for all

Nice first post mate i must say....

[woodywoodpecker]

I got this to work good with xp sp3 no luck with windows 7, Does anyone know if egr remove works as i run my original file through and it says dpf removed but no mention of egr removed ? thanks anyway for the great work.

[blackpirate]

i run it on win 7 x86 ! all goes well!

[woodywoodpecker]

I have just done a file compare with dpf removed and dpf and egr removed and can confirm the files are identical so ticking egr does not remove the egr if anyones wondering if it does.

[Immo]

Work ok!!!!! Thanks

[autocargo]

Software works for me too. Thanks!

[moky]

yes work fine on W7 64bits without problem :rock:

[micromax]

soft work fine. thanks

[Nicowico]

Works fine

[elchip]

a big THANKS to the cracker, good work mate!
I'm curious if EGR off works
You can't remove EGR on all car's.Only on specific...

[ecutoool]

Thanks friend blackpirate but imposible to update soft
please help my uplaod new version

[Dluisao]

work fine good job

[KACZANUK]

Working perfect in Windows 7 !!!

[bnad3m]

It seems that it doesn't reach internet connection.... Do you have firewall or something like that?

If you have, try on a different pc, if it works there, just copy-paste all files back to your pc, should work :)
i will try it soon... my other laptop is broken
thank you for you help :)

[egyclick]

i will try it soon... my other laptop is broken
thank you for you help :)

wonder why the Siemens PPD doesn't work neither on their latest release...
almost forgot to give Thanks to blackpirate (http://www.digital-kaos.co.uk/forums/members/54261-blackpirate/) , had a very cool post

[zuzuss]

thx ,soft work fine i tested on 307 2.0rhs

[drakov]

Turbo Diesel Owners Club UK - Diesel Tuning and Discussion • View topic - dpf removal (http://www.tdocuk.com/viewtopic.php?f=41&t=4918&p=75569)

It seems it's not just ebay sellers we need to look out for.... nice work NicoWico on questioning gepy

[reda75]

For me work
,GOOOOOOOOOOOOOOOOOD

[worldiagnostic]

Works perfect, mate. Tested: Win7 x86, x64, XP

[egyclick]

Turbo Diesel Owners Club UK - Diesel Tuning and Discussion • View topic - dpf removal (http://www.tdocuk.com/viewtopic.php?f=41&t=4918&p=75569)

It seems it's not just ebay sellers we need to look out for.... nice work NicoWico on questioning gepy

spot on drakov, and this 'gepy' guy has posted also the link of digital kaos, now everyone will sign in to take the ecusafe from here as new registerings are allowed from yesterday i think.

[ecutoool]

i have tested updat ecusafe but not work
please uplaod soft friend

[blackpirate]

huh?

you are doing something wrong!

use the setup from archive! and read carefully the instructions!

[eprommazza]

i have tested updat ecusafe but not work
please uplaod soft friend


maybe stopped upload from server

by ecusafe

[blackpirate]

no!
i just uninstalled and done a fresh install!

all works great!

[ecutoool]

yes all upload from server stoped


please help myyyyyyyyy

[eprommazza]

yes all upload from server stoped


please help myyyyyyyyy

listen blackpirate

try to other pc

[ecutoool]

friend blackpirate uplaod all soft and thakssssssssssss

[blackpirate]

INSTRUCTION FOR INSTALLING WITHOUT UPDATEING!



1. install from setup.exe from the first post
2. then download the latest setup from Download (http://ecusafe.com/html/download.html)
3. install it too! (do not uninstall previous! )
4. copy this files into installation folder! replaceing old ones!!
5. start application using the loader

Download new instr.rar from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/8i2t33)

cheers

[cammy25]

Is there not a way to install without update?

we dont want to be dependent to their server don't we?

[blackpirate]

its the way i posted above!

post #62

test it! ;)

[cammy25]

Ok but.....

I see only old 1.9.0.5 Demo version that can be downloaded.
Could you post the setup here?

[blackpirate]

They forgot to update the website! :)

dl that version! its 1.9.3.0!

BR,
BP

[mecadiag]

i can not update ecusafe from ecusafe.com

please uplode folder C:\Program Files\ECUsafe wich are updated.

[bazare]

I have tried this and for me its working ok. I will try this in real time also.

[blackpirate]

i can not update ecusafe from ecusafe.com

please uplode folder C:\Program Files\ECUsafe wich are updated.


try method from post #62

cheers

[engi76]

[QUOTE = egyclick; 760.108] sul mio pc:

installare ok
copia / incolla ok.
Loader ok (popup dire ecusafe ? incrinato da .....)
Ma questo ? tutto, nulla si presenta proprio come sul v1.9.2.0

di bello per essere vero!

Tra l'altro ci? che mostra l'ID di licenza sul PC, sulla mia mostra: EC19-4E3504F0-4C-94-43-5E-28-48-31-14 [/ QUOTE]

FUNZIONA BENE!!!

[motocarlos]

work very good on my pc.

Thankx friend.

Regards.

[branco]

ecusafe.com is down
can somebody upload the 1.9.3 from the web site please
can't make ite working
got message" $0b " is not a valid integer value"
thanks

[blackpirate]

looks like nobody reads the topic!
read post #62!

download it from there!

test and report!
ignore that on the website its written another file version!
its 1.9.3.0!!!!!!!!!!!!!!!!!

cheers

[branco]

hi friend
I know but site is down!
best regards

[blackpirate]

no! its just you! works great here!

in the future to check if a website its down or its just you, check:
Down for everyone or just me? (http://downforeveryoneorjustme.com)

cheers
edit1:
get the setup from here!
http://www.sendspace.com/file/i5wgep

[drakov]

Also check your AV programs, seen a few now where AV flagged the main exe (not the loader) as a virus.

[branco]

wooww!
many thanks friends
works great
millions thanks m8

[elchip]

Also check your AV programs, seen a few now where AV flagged the main exe (not the loader) as a virus.
darkov you have right about all...

For help to all peoples who have that type of problem , I was have a so many problem's with running programs and at finish I was remove all "anti virus" garbage from my PC. Now I don't have any off them and all work perfect.
"I don't go to any online game website and similar and chance to get any off "" virus "" are minimum."
Also if you use PC for job do not put CD , DVD or flash stick from any unknown man or something like that.
And PC will work full speed and no more any type of warning "those program has illegal operation" or something like that.
All port's will work ok ETC .....

Sorry if I bore someone with my text but many of you have or was have that problem's like me and that is lose of time..

My PC:
IBM MT-M 8188-MGP genuine
Dual processor Intel at 3GHz
2GB RAM in parallel mode
( I was buy it from USA )
Windows XP SP3 , Office 2003
and all programs work just fine

Regard's to all on DK

[miha99]

Follow instructions on post 62 and ecusafe works on Vista 100% good!

[betmen]

INSTRUCTION FOR INSTALLING WITHOUT UPDATEING!



1. install from setup.exe from the first post
2. then download the latest setup from Download (http://ecusafe.com/html/download.html)
3. install it too! (do not uninstall previous! )
4. copy this files into installation folder! replaceing old ones!!
5. start application using the loader

Download new instr.rar from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/8i2t33)

cheers
Hello,
which cable do you need to work with Ecusafe?
is it possible to work with vag-com 409 or vag commander 1.4, both clone

[pawliukazz]

Hello,
which cable do you need to work with Ecusafe?
is it possible to work with vag-com 409 or vag commander 1.4, both clone
ECUsafe doesn't need any cable m8 :) It's only software for flash modification...

[betmen]

ECUsafe doesn't need any cable m8 :) It's only software for flash modification...
so how can you work/connect with ECU?

[sjonv]

u can use a tuning obd tool or desolder and use a programmer.

[branco]

so how can you work/connect with ECU?


with galetto , bdm100 any flasher tool
regards

[damih]

Thanks!!!!!! work for me win sp 3

[Novik_UA]

Thanks a lot, it works !!! :thrasher:
Maybe it some manual for work with car hardware ? What we need to do, after flash DPF off dump in ECU ?

[noslen]

Tested and working fine on peugeot and audi
Great job BlackPirate
;)

[blackpirate]

Full credits to Evolution!not to me!

[chucky69]

files corrected by this version (1.9.3.0) are still differently by original version of ecusafe, dont know why, but its different and the same like older version (1.9.1.6)...

[blackpirate]

huh?
i didnt understand anything!


anyway ..some info:
the setup for 1.9.3.0 its just an update! ;)

[eprommazza]

files corrected by this version (1.9.3.0) are still differently by original version of ecusafe, dont know why, but its different and the same like older version (1.9.1.6)...


no new version there are some good fixes I personally checked (volvo EDC16) now works fine

[chucky69]

no new version there are some good fixes I personally checked (volvo EDC16) now works fine

yes, what i see there are some new fixes in other ecus, but still not looks like original ecusafe files, i dont understand why...

[ipejasinovic]

Can you provide me a one file fixed with original version of ECUsafe?

[eprommazza]

yes, what i see there are some new fixes in other ecus, but still not looks like original ecusafe files, i dont understand why...

i have friend who have the original and not see differents

mj marelli not ready

[shamak]

Thanx, software work great

[gizmo666]

Thanks, i also try this and it looks at it is working well;)

[teoturo]

Link in post 62 not working any more... so now the right sequence is:

download from first post
install and update
... and then?

Thanks to everybody :)

[blackpirate]

first of all liNk from post #62 works!

second read carefully first post with the instructions!

also the setup idetical with the one of #62 can be found on #75!

cheers!

READ ENTIRE TOPIC BEFORE YOU ASK!

[dott.chem]

Hi, today I tried to install the program with protocol in post#62 but the program don't work (I'm sure my mystake in installation procedure)

I installed the software using protocol in post #1.
Installation is ok but trying the program on alfa 1.9mjtd it doesn't remove dpf and EGR.

Isn't installation by post#1 good?
thanks

[teoturo]

first of all liNk from post #62 works!

second read carefully first post with the instructions!

also the setup idetical with the one of #62 can be found on #75!

cheers!

READ ENTIRE TOPIC BEFORE YOU ASK!


I asked because I tried but maybe something is wrong in my procedure :( because I installed everything as explained and I get this when I run program

[teoturo]

I tried 3 times unistallation and installation but I get every time the same messages. Program starts when I install as in first post, updates to new version, but then I use the second SETUP.EXE and:
- if I try to start the program with ecusafe_1930_loader.exe I get the message in my previous post
- if I try to start the program with Ecusafe2.exe I get the unregistered-version-screen with license ID asking me to "enter key"

[maRtins.Pt]

one question, if i unplug the sensor of DPF/FAP it will show a error or something? or i can remove the sensor with no problems?

thanks

[blackpirate]

I tried 3 times unistallation and installation but I get every time the same messages. Program starts when I install as in first post, updates to new version, but then I use the second SETUP.EXE and:
- if I try to start the program with ecusafe_1930_loader.exe I get the message in my previous post
- if I try to start the program with Ecusafe2.exe I get the unregistered-version-screen with license ID asking me to "enter key"

do not combine the installation procedures!

replace the main exe with the one provided in the post #62! if you used that method!

if not you can use the method from first post! and update from server!

anyway, if you cant solve it! i can enter on your pc using team view to install it for you!

i wil pm you tonight!

[bertonex_19]

Worked 100% like on post #62...

[maRtins.Pt]

one question, if i unplug the sensor of DPF/FAP it will show a error or something? or i can remove the sensor with no problems?

thanks

please any guy confirm for me !?!?!

thanks

[pawliukazz]

please any guy confirm for me !?!?!

thanks
Actually i'm not sure, but i think you must remove it, because ecusafe removes DTCs table for fap/dpf, and when the sensor is pluged in, it gives error, because the computer didn't expect any sensors after ecusafe...

[milzal]

On PSA EDC15 i have tested without disconnecting sensor, and work fine.

[radiodecoder23]

very thanks friend, it is a working...

[Myago]

The crack working, thank!!

[doch16]

Many thanks blackpirate

[chowler]

Hi all,

Just to let you know that if using Windows 7 (and i suppsoe Vista) make sure you run ecu_safe_1930 as administrator or you will get some errors and software wont work.

Thanks for uploader.

[noze95]

THKS YOU BLACKPIRATE GOOD JOB !!!
IS WORKING!

[yas200979]

SID801A not work...

[bluedid]

Blackpirate thanks the program work

[Larue]

Thanks to Blackpirate! Get all things workingwithout any probs. Have not yet tryied new files on cars,but hopefully they will be working.
Just one more question. I remember from older version...i had updated it and after some time it stopped working, but in the same time old cracked version was working on the same computer. That seems to me there is some time limit. What about Your crack? Does it has some time limit as well?
Sorry to be a pain. Tou have done great work and thanks for that! ...just would be interesting to now when the end of joy is coming....

[blackpirate]

its not my crack!credits go to Evo!

no time limit! works as fully buyed version! ;) no limitation!

well, if an update will stop it working you can use method from #62 and after that to stopt the application to connect to internet!

job done!

cheers

[impactops]

well, if an update will stop it working you can use method from #62 and after that to stopt the application to connect to internet!


But then they can no longer do updates.

[blackpirate]

this was just an update setup!

others will be released for sure!

lets hope that new loader will be also released! ;)

Cheers!

[impactops]

lets hope that new loader will be also released

If you have to keep writting loaders for changes they make when you do an update, it means it has not been cracked, only a temporary fix.Ecusafe have not changed the way they do the license cause it uses the same license file as previous versions.The only thing they have done is added Winlicense option in Themida on top of there current licensing.They can make changes to the Winlic part without issuing new keys & render the loader useless.

You need to create a .unlock folder which it looks for & put a valid winlic file in there so that in order for them to disable it they need to change the whole Winlicensing process.

[blackpirate]

the best solutions its the simplest! no need to worry now!

c ya

[metric]

how about option remove egr/agr? Anybody tested? Work or not?

[eprommazza]

how about option remove egr/agr? Anybody tested? Work or not?

for now not exist db and not work

[ipejasinovic]

Something for EGR Remove ?! :D

[eprommazza]

Something for EGR Remove ?! :D

nice... can pm me for this tool?

thanks :thrasher:

[teoturo]

Removing egr from 1.3mjet means modifying a unique bit, so it's really easy to make manually.

Instead of egr deleter, a DPF deleter for 1.3mjet would be a good application.

[ipejasinovic]

@teoturo
It's not uniqe bit, it's uniqe bytes. But, how much would like to pay for DPF Remover?

[metric]

ipejasinovic, how much would like to pay for DPF Remover?

[franz]

:goodpost:perfect!
Crack it's OK.
Thanks

[teoturo]

@teoturo
It's not uniqe bit, it's uniqe bytes. But, how much would like to pay for DPF Remover?

Dobar dan ipejasinovic... kako ste?

Do you really have in Hrvatska/BiH a DPF remover for 1.3mjet? I stayed in Zagreb 2years (Dugo Selo if you know) but I heard nothing about this.

Halo

[ipejasinovic]

Maybe we have and maybe I'll add support for DPF in my SW, and then release it.

Pozdrav

[teoturo]

Maybe we have and maybe I'll add support for DPF in my SW, and then release it.

Pozdrav

It would be really a good choice :wavey:

[stk90]

This Ecusafe removes the FAP on this Peugeot 1.6hdi?

Bosch
EDC16C34
1037386144
------------------------------
Cks: 9CE9
Size: 2097152 = 0x200000

[teoturo]

this was just an update setup!

others will be released for sure!

lets hope that new loader will be also released! ;)

Cheers!


Is it the same result if I:
- download and install .exe in the first post and update from EcuSafe server
or
- download and install .exe in the first post and then download and install the second .exe?

I installed first .exe and updated, do I need to use the second .exe?

[Ginocar]

Hi, Blackpirate

It's program very good.
You are big pirate. :-)

Thank you very much.
Regards
Ginocar

[todos]

Hello, someone can disable the fap to this dump edc15 c2 I am attaching the file thanks...

[woodywoodpecker]

Hello, someone can disable the fap to this dump edc15 c2 I am attaching the file thanks...

todos here you go m8

[todos]

:wavey:Thanks I try it tomorrow!!!!!!!!!!

[todos]

:wavey:Thanks I try it tomorrow!!!!!!

[egyclick]

please, can someone help me with a T5 2.5 TDI from 2007, I need to get rid of DPF
I attached the file, was read with galletto, I presume the checksum will be made in writing..

Thank you!

[adikk]

please, can someone help me with a T5 2.5 TDI from 2007, I need to get rid of DPF
I attached the file, was read with galletto, I presume the checksum will be made in writing..

Thank you!
EcuSafe work whith EDC16 VAG-grup

[augustinbz]

please, can someone help me with a Audi A4 2.0 TDI from 2007 EDC16U31_CAN, I need to get rid of DPF
I attached the file, was read with byteshooter.
With Ecu Safe, the light of DPF it's still on and car has no power. (i tried both ECU Safe version 1.9.1.6b and 1.9.3.0)
any ideas?

[super1]

32682


Have tried a couple of times.to no avail.
regards

[kidcit]

what is the key to use
this is my ID EC19-B498050D-3A-88-B5-76-BF-79-A0-E1

[kidcit]

uninstalle and re installed as per post 1
now working
thanks

[riverflow]

Thanks!! It's really good for diesel cars

[cosmind]

try this and post reply

regards

[egyclick]

yes I will sure try and see how is it, you did it with ecusafe? I made one also and saw that is different from yours, that's why I wanted to ask help to someone else in case I didn't do something correct.
the file I did with Ecusafe has 50 differences from the original
yours has 120 differences from original.

hope to not screw it up.

thanks!

try this and post reply

regards

[banetv]

I install Ecusafe on XP modified (LastXP) and work fine. Thanks. But graphical interface is not complete, missing text on four buttons on right side: "torque limiters" etc... Buttons works - change color to red. What is wrong? (see different from picture on page 1)
http://s2.postimage.org/JfBki.jpg (http://postimage.org/image/2jvjughgk/)

[egyclick]

I install Ecusafe on XP modified (LastXP) and work fine. Thanks. But graphical interface is not complete, missing text on four buttons on right side: "torque limiters" etc... Buttons works - change color to red. What is wrong? (see different from picture on page 1)
http://s2.postimage.org/JfBki.jpg (http://postimage.org/image/2jvjughgk/)

I believe you're missing some basic fonts in Start -> Control Panel -> Fonts

[alkmari]

thank s but not work on vista

[banetv]

I believe you're missing some basic fonts in Start -> Control Panel -> Fonts
But other fonts on graphic works! Only this buttons text missing. I try other install but the same problem. Any ideas?

[einet]

Way the save button dont came up or to enable?

[pawliukazz]

thank s but not work on vista
Work on vista 32-bit sp1, indeed...

[jolidj]

thank you ..

[einet]

Hello,
So i find out.

When this help some one, GO.

For me only work in this constalation:

Instal setup from 1? post and all
Make update
Instal setup from post 75
Then the "new instr" and all

Only this work by me on Widows 7 ultimate.
I tray all versions, but this is only for me to put this to work.

einet

[worldiagnostic]

Anyone tried to update the last version of Ecusafe? 1.9.3.1

[gzk]

Anyone tried to update the last version of Ecusafe? 1.9.3.1

their website have been hacked and a viruz is inserted on the ecusafe2.exe file so if you make the upload you can be infected too .
the website also contains some exploit .

[blackpirate]

huh?
virus?neah!
its just the protector over ecusafe2.exe!

your av detects that code as a malware!

[worldiagnostic]

But anyway, does the app still work after update from 1.9.3.0 to .1?

[pawliukazz]

But anyway, does the app still work after update from 1.9.3.0 to .1?
No, it asks for a license key, and loader does not work... We need to wait for another crack :)

[worldiagnostic]

No, it asks for a license key, and loader does not work... We need to wait for another crack :)

Anyway, it works as a crap till today :)

[eprommazza]

No, it asks for a license key, and loader does not work... We need to wait for another crack :)

update 1.9.3.1 work with same crack

:congrats:

[blackpirate]

well, post instructions for all!;)

[shamak]

for me version 1.9.3.1 dosn't work with crack 1.9.3.0, after update has to shut down aplication and then can't start it againe. Any solution please

[Larue]

After update the program is asking for restart. If You are restarting it, it asking for activation code, but without restarting, just pushing button NO and after starting from loader it's working. Just showing the same version 3.0 .
Actually don't now it removing after that anything, but program isn't asking for any codes.

[blackpirate]

its just a small update...
eprommazza (http://www.digital-kaos.co.uk/forums/members/88361-eprommazza/) found this trick:

copy old ecusafe2.exe somewhere, do the update ! then replace 1931 exe with 1930 exe that you copyed earlier!

you will have a 1930 working version with the 1931 databases!

i didnt explained too good...

[eprommazza]

for me version 1.9.3.1 dosn't work with crack 1.9.3.0, after update has to shut down aplication and then can't start it againe. Any solution please

after update you need to put ecusafe2.exe and loader in the directory

resoult:

db update 1.9.3.1


Loading/inflating DPx database helper. 322 records loaded.
Loading/inflating SL1 database helper. 117 records loaded.

[blackpirate]

hmmm...but version 1930 has DPx database 326 records..and SL1 116!

conlusion: update to SL1 database and downgrade to DPx! :P wtf..

[eprommazza]

its just a small update...
eprommazza (http://www.digital-kaos.co.uk/forums/members/88361-eprommazza/) found this trick:

copy old ecusafe2.exe somewhere, do the update ! then replace 1931 exe with 1930 exe that you copyed earlier!

you will have a 1930 working version with the 1931 databases!

i didnt explained too good...

explanation is perfect!!

[eprommazza]

hmmm...but version 1930 has DPx database 326 records..and SL1 116!

conlusion: update to SL1 database and downgrade to DPx! :P wtf..

:champions:
it means nothing and that 'less (database is update)

1916 are 329

[Larue]

On my version 1930
DPx = 326
SL1 = 116

Version 1931
DPx = 322
SL1 = 117

[shamak]

after using "no" button it looks like this pcs. and dosen't work

[eprommazza]

On my version 1930
DPx = 326
SL1 = 116

Version 1931
DPx = 322
SL1 = 117

yes and 1916 =329

[Larue]

Ok! hopefully that means nothig!

[Larue]

after using "no" button it looks like this pcs. and dosen't work
Blackpirate has better explined what and how to do!

[shamak]

ok, thanx, I presume I spend today to much time with my laptop and my brain is geting tired
Thank you againe, explaine is more than clear

[blackpirate]

test it on a file!

so databases dont mean anything!?dont think so...
i suggest to use 1930 as 1931 isnt a BIG, important update! ;)

you decide!
all the best!

[eprommazza]

test it on a file!

so databases dont mean anything!?dont think so...
i suggest to use 1930 as 1931 isnt a BIG, important update! ;)

you decide!
all the best!

i see any file with any bug fixed
example try 1 file ppd ecu
is different
and i know any guy haven't problem with it
maybe now is corrected

[shamak]

I'll let you know result after mod. a few files

[worldiagnostic]

I'll let you know result after mod. a few files

Comparing one Ford 2.0tdci SID: last and previous version DPF-off files are identical. Nothing changed = problem not solved.

[teoturo]

i see any file with any bug fixed
example try 1 file ppd ecu
is different
and i know any guy haven't problem with it
maybe now is corrected

Could you please send a PPD ori and mod file with deleted DPF? I'm curious to see the new fix and I heard there's a virus when I donwload upgrade so I would not like to update. Thanks

Per cortesia potresti postare un file originale PPD e il suo modificato con eliminazione DPF da Ecusafe? Sono curioso di vedere la modifica e ho sentito che aggiornando si scarica anche un virus cosi non vorrei aggiornare. Grazie

[banetv]

My solution for update: update only database NOT program. When update, uncheck 3rd option "Ecusafe 1.9.3.1". Then will be stay cracked version of program with new database. It work.

[eprommazza]

My solution for update: update only database NOT program. When update, uncheck 3rd option "Ecusafe 1.9.3.1". Then will be stay cracked version of program with new database. It work.


its not your solution

we have explan it

regards:wavey:

[japan62]

Hi eprommazza...
please can you explain me why on win7 i can't install ecusafe...
maybe i make some wrong...
please can you repeat how install ECUsafe working???
Many thanks for all your posts...
very usefull

[blackpirate]

mate, i run it on 7 x86! runs very good!
install after after instruction from post #62! ;)

[alex_SW]

i dont get a thing...if u open a file and remove dpf,save it,then open it again(orig file) and remove dpf again,save it.the 2 mod files are not same...WHY???is it safe to write it back to edc?
br

[impactops]

If you have to keep writting loaders for changes they make when you do an update, it means it has not been cracked, only a temporary fix.Ecusafe have not changed the way they do the license cause it uses the same license file as previous versions.The only thing they have done is added Winlicense option in Themida on top of there current licensing.They can make changes to the Winlic part without issuing new keys & render the loader useless.

You need to create a .unlock folder which it looks for & put a valid winlic file in there so that in order for them to disable it they need to change the whole Winlicensing process.

The Eprommazza trick was also applied from 1.9.1.6 to 1.9.2.0 & was disabled when they went to 1.9.3.0
So unless you make a keygen for the licensing or generate a valid license file, they can make suttle changes to disable any fix.Only a valid license will force them too make a complete change, but if they keep having too do this & you keep providing solutions Devilfish will be recieving an email.
It is a product they charge alot for & will go to any means to make sure it remains protected.

I'm echoing my own words!

Regards
Impactops

[japan62]

thank for help Blackpirate...i will try now...

[japan62]

hi Black pirate...now i'm tryng..but when i launch the loader... FILE ACCESS DENIED ...
and have multiple ecusafe windows...
if i try to upgrade for definition files....
FILE ACCESS DENIED...
what do you think i wrong???

[blackpirate]

if you want you can send me a PM with your id and pass of your teamview!
i can sort it out for you!
cheers

[japan62]

solved...works on win7... :)
xp sp3 comp...mode...
run in administer mode...
many thanks again...

[jolidj]

I see the ppd ecu file,the fap mod whith ecusafe original is not same with this ecusafe.
anyone tray this ecusafe crack with ppd ecu??

[eprommazza]

ready another update this morning with same procedure

resoult:

Loading/inflating DPx database helper. 328 records loaded.
Loading/inflating SL1 database helper. 119 records loaded.

28.09 - EDC16 Mercedes, KIA, FORD - improvements against power loss in some cases.
28.09 - VAG PPD1.x new limiters added

need to test

regards

[jolidj]

i update.for ppd ecu.
i dont have courage to write the file.
the file is sou strange.

[alex_SW]

so?anyone tested moded files ?would it be safe to write mod file in edc16+cp31 for ex?

[alex_SW]

btw...when u open a file and wanna remove speed limit,the program dosent show actual speed,or modified speed...anyone encountered this?

[teoturo]

i update.for ppd ecu.
i dont have courage to write the file.
the file is sou strange.

Meglio prima fare il backup in BDM... e logicamente aver tolto fisicamente il DPF.

[jolidj]

thank you ..e logico.
grazie

[mods4cars]

can somebody paste up the 19.30 version , didnt realsie i had to keep it

[xryst]

when run the loader this message appears
http://s11.radikal.ru/i183/1009/1f/77496ab87cda.gif
what is it? Win XP SP3

[blackpirate]

read post #62!

cheers

[xryst]

so also did not help. First, delete everything, then put the first one with 1 post, and updated to 62 post, replace files

[blackpirate]

use only files and instruction from post 62!

do not mix them!

[Larue]

so also did not help. First, delete everything, then put the first one with 1 post, and updated to 62 post, replace files
Did You read all thread? If not - start reading from post 1 and read carefully till end.
If this doesn't help - try to read once more....and so on...
Finally You will be able to get it working:thefinger:

[fargulkim]

Any more version 1.9.3.1 doesn't work

[worldiagnostic]

Everything works. But in future Ecusafe seem to be developed online :D
Citate: 28.09.2010. ES 2.0 release
Because of notorious cracking attempts I decided to release version 2.0 as webservice. Thus - this release was delayed but will be available soon. Version is free for all valid license owners. Sorry for inconvenience.

[eprommazza]

Loading/inflating DPx database helper. 333 records loaded.
Loading/inflating SL1 database helper. 119 records loaded.

another update ....

when ready 2.0 version is normal the play stop finish

01.10 - EDC16 Chevrolet Cruze - some structures missing, added. thx BitPower


regards

[branco]

Loading/inflating DPx database helper. 391 records loaded.
Loading/inflating SL1 database helper. 119 records loaded.

regards

[japan62]

can ecusafe 1.9.3.0 disable egr in a panda 4x4 mj 2008???
i tried with lancia Y mj and doesn't work...
seams ecusafe don't recognize file....
regards

[Larue]

can ecusafe 1.9.3.0 disable egr in a panda 4x4 mj 2008???
i tried with lancia Y mj and doesn't work...
seams ecusafe don't recognize file....
regards
Of course it can't disable EGR! When You put Your file in ECU safe under EDCwhichever it is does it come up with tick tin box fo EGR? I suppose - NO! You put that tick by yourself... That means there is no option to do that. In my opinion that option isn't working now at all, but will be in one of next releases.....

[jolidj]

THE NEW UPDATE IS OK FOR 1.3MJT?
I TRY AND TELL DPF REMOOVE.
IS POSSIBLE??

[ipejasinovic]

No, still can't do nothing on MJD.

[jolidj]

You try this??

[ipejasinovic]

Yes, on 20+ different files from MJD ECU's. ECUSafe can't even read ID from file. At least, that's simple, because I've done it for my sw...

[dolphin123]

hello ipejasinovic
Share software, we try

[kidcit]

cannot get to ECUsafe to work.
i have followed the instruction on post 1 and on post 62,
getting the following "error while loading target or time out". i have unstalled and re installed a number of times
what am i doing wrong?

[blackpirate]

do not mix instructions!
use only 1 of them!
i suggest from post 62!

[kidcit]

INSTRUCTION FOR INSTALLING WITHOUT UPDATEING!



1. install from setup.exe from the first post
2. then download the latest setup from Download (http://ecusafe.com/html/download.html)
3. install it too! (do not uninstall previous! )
4. copy this files into installation folder! replaceing old ones!!
5. start application using the loader

Download new instr.rar from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/8i2t33)

cheers
following post 62
1 back to post 1 and run setup there, and copy in the .dll file but i don not run the app.
2, run the download in step 2 - save setup from download then run to \ecusafe folder (tried to new folder as well)
3 then i copy the files from loader to \ecusafe
4 then run loader file and get error


I have also downloaded the .rar from sendspace.com it the same

i need more help

[blackpirate]

install teamview and pm me with your id and pass!
i will help ya!

cheers

[kidcit]

ok check your pm

[blackpirate]

job done! ;) solved the problem!

cheers

[kidcit]

thanks for that

nstiull cany see waht different things you did but will try on anothet PC --- just to learn

[dariusddj]

i have this two problems. list is empty

[auto16]

hi code ECUSafe 1.9.3.0
ACTIVATION

EC19-CC908FA5-5F-C6-A9-25-F6-6A-FE-D2

[kokovi4]

i have this two problems. list is empty
Hi,
Try this instruction.
http://www.digital-kaos.co.uk/forums/f175/ecusafe-1-9-3-0-working-159419/index5.html#post761681
worked good for me :)

[alex_SW]

ok,program is workin...but it is realy workin on cars??did someone succesfully write back mod file to car? dose it work on mb for ex?


for those who cant get it fixed...i attached a rar with good folder and updated dtb....just open the loader...

thanx and regards to those who made it work...

[yas200979]

Audi A4 not work. Help me disable FAP. ECU Siemens PPD1.3

[robertop]

Audi A4 not work. Help me disable FAP. ECU Siemens PPD1.3

662kb?:afraid:

[yas200979]

this is flash+eprom. Damp BDM-100

[dariusddj]

ok,program is workin...but it is realy workin on cars??did someone succesfully write back mod file to car? dose it work on mb for ex?


for those who cant get it fixed...i attached a rar with good folder and updated dtb....just open the loader...

thanx and regards to those who made it work...
now software it's working but i don't know if is is good. thanks

[teoturo]

now software it's working but i don't know if is is good. thanks

ALT engine code is benzin not diesel :eek:
It can't have DPF :hmmmm2:

[dariusddj]

the software is only for diesel engine?

[sjonv]

DPF = diesel partikel filter

[vwpassat]

Anybody can confirm EGR off?

[bedone]

it's goood prg
thx black

[egyclick]

hello friends,

I have 1 file from a friend of mine, a peugeot 406 2.2HDi if I'm not mistaken
-the file is tuned with FAP ON (406_2_2hdi_fap)
he wants FAP OFF, can someone help please?

Thank you!

[teoturo]

It seems with last archive EcuSafe makes also 1.3mjet... did somebocy try? File after deFAP is really strange.

[mathi120]

Hallo
brauch Freischaltung f?r EcuSafe 1.9.3.1

Bitte um Hilfe

EC19-04D059AC-30-B9-EB-6C-06-06-73-77

Danke

[oakley1]

work this program??

[eprommazza]

work this program??

nope

after few km the car fire..

regards

[teoturo]

nope

after few km the car fire..

regards

Are you saying you tried? Do you really mean you tried and your guest's car went in fire :hmmmm2: ?
You can say it's not working, ok, but with straight pipe and FAP/DPF not disabled the car smokes, really not burn in fire :hmmmm2:

So how can it fire up with bad-disabled FAP-maps in ecu and not with fully working FAP-maps in ecu?

[oakley1]

I think that the dpf is not full remove to' map and we have the strike pipe the car make smoke. but don' burn

[macxlulu]

ecusafe work Astra h 150 cdti edc16 and suzuki grand vitara 130 hp edc16

[JOSEPH1975]

Hello,
but EGR Remover in Ecusafe doesnt work!!!!

This is the BDM file.

[elecautocr]

What is Torque limiters, DTC error tables, strategy maps and Post Injection bottons for ??

[alladdin]

sorry for being a pain here but im failing with this......
can someone clarify the post 62 step 4 please ?
regardless of which version i try it on the file from loader always says target not found or timeout ?

[explode82]

it good ecu safe 1.0.9.6

[emsoft]

don?t work
"Error while loading target or timeout problem!"
something is wrong with Loader

[vwpassat]

Anybody cans confirm if done EGR off with this software?

[teoturo]

Anybody cans confirm if done EGR off with this software?

Better manually...