Opcom 082010

[drdre20013]

i have this if anyone wants it, works 100% with china clone. Not sure if i can post a link to it on the forum so PM me.

Rob

[bibkare]

I tested it also and it can program Underhood electrical center UEC which 090820d couldn't work, i used it on vectra C for daytime running lights adjustment (mode 3)

Hvala VZ

[bonecrusher]

Guys can anybody else confirm that this works

[bibkare]

Guys can anybody else confirm that this works

Confirmed many times, you just need to have 1.39 firmware in your interface

[NIGHTCD]

Guys can anybody else confirm that this works

works like an charm ;-)

[NeoYox]

works perfect for me

regards

[mattydr67]

This sw works like a charm.
@bibkare my friend in the previos version 090821D did you have programming folder into the langdata?
Take a look and if you haven't you can't do what you can do with this new crack.
But I think if you insert that programmings into the previos version you can do it like with the new one.
If you have possibility to test.
Good luck

[tk500]

totally fake

[drdre20013]

totally fake

whats fake?

[tk500]

this version

[drdre20013]

well works ok for me and others

[enyckma]

hi! i've read the "opcom activation.pdf" and i didn't find the "activate password.exe" file from the second point. where i can find it?

[tk500]

as old version :hmmmm2:, no differences

if you want i will make 12/2012 ver ...

it's fake and is not from august

[naunaute]

Good morning.
I have an Opel vectra 2.2lDTI 2001.
I want a software to emulate a tech 2.
is there a free software??

[naunaute]

optcom est'il the best software, or is there a best????

[enyckma]

is there a best! his name is tech 2! (not chinese 1)

[Meat-Head]

sorry to spam:-

Does this now programme the EASYtronic gearboxes?

needs inferface to run - interface at work lol

FANTASTIC upload

[Harry_Be]

as old version :hmmmm2:, no differences

if you want i will make 12/2012 ver ...

it's fake and is not from august


Change screenresolution while running and see what you get.

[yysnet]

I haven't test it in car but i believe this is a fully cracked one. BTW I have spent long time attempt to unpack but fail... This is great to us

[Scopepattern]

sorry to spam:-

Does this now programme the EASYtronic gearboxes?

needs inferface to run - interface at work lol

FANTASTIC upload
Hi Meathead,you are completely bonkers,but i love reading your entertaining and often off subject replies.
keep up the crazy work.
To answer your question,yes this new opcom will program all aspects of easytronic programming,a really worthwhile upgrade if you need it.all we need now is for opcom to be able to sps program and it would be complete.
I have read of rumors of a new opcom advanced which will do new and wonderfull things ,info is still sketchy at this moment in time,but i believe all will be revealed soon by the opcom team.

[yysnet]

I can confirmed it works in my car. BIGGGG thanks.

[Patrian]

Change screenresolution while running and see what you get.

DO NOT worry m8, and he will POST YOU "HIS" Screen Resolutions soon..... :)

You will surprised A LOT!!! ;)

Trust me..... ;)

My Best Regards!

[NIGHTCD]

anyone know which opcom i can use to program PDM and DDM ? (door modules)

NIGHTCD

[drdre20013]

not sure if i can link this up but here is the info on opcom advanced, if not thena mod can delete this and accept my apologies.

Rob

[bibkare]

DO NOT worry m8, and he will POST YOU "HIS" Screen Resolutions soon..... :)

You will surprised A LOT!!! ;)

Trust me..... ;)

My Best Regards!

It would be nice if someone could unpack it and erase the words "CHINA CLONE" on the first screen and just leave OPCOM 2010 then upload again, it's just sucks to see it that way

[drdre20013]

It would be nice if someone could unpack it and erase the words "CHINA CLONE" on the first screen and just leave OPCOM 2010 then upload again, it's just sucks to see it that way

Dont matter what it says lol, as long as it does the job.

Rob

[NIGHTCD]

Dont matter what it says lol, as long as it does the job.

Rob

Agree, as long as it does the job :-)

[Patrian]

It would be nice if someone could unpack it and erase the words "CHINA CLONE" on the first screen and just leave OPCOM 2010 then upload again, it's just sucks to see it that way

Like this m8????? ;)

http://i56.tinypic.com/2w50pow.jpg

:ridinghorse: :ridinghorse: :ridinghorse:

Regards!

[Liteace]

Like this m8????? ;)

http://i56.tinypic.com/2w50pow.jpg

:ridinghorse: :ridinghorse: :ridinghorse:

Regards!

Yes, yes thats the one, looks a lot better. Its it just software this, I dont have to re-prog the interface or anything like that do I ????

[bibkare]

Mr. Patrian, can we get modified version please

[racin-snake]

tried it today works great ....cheers again guys

[Meat-Head]

Yeah, cool, no idea who i'm saying thanks to, but yes great, love you long time.

Sorry, will have to be vague

2002, corsa c, *THINK* IT was in instrument cluster, where you read the eeprom,
it says something spelt wrong. - was busy

Yes does easytronic gearbox, but this is a problem car, so it spat it out!

Must admit, would be nice if china bit removed, doesn't look good with a customer
over your shoulder.

THANK YOU FOLKS

[Scopepattern]

Like this m8????? ;)

http://i56.tinypic.com/2w50pow.jpg

:ridinghorse: :ridinghorse: :ridinghorse:

Regards!
Patrian,you are a better wizard than harry Potter,fancy letting us in on the black magic?

[ewq]

And it is also op-com.china

[bibkare]

oep_opcom_no_chino.rar pasword?

oep doesn't know

[Liteace]

Thats fantastic works a treat

Thanks

[beats2006]

Whats the password ne1?

[NIGHTCD]

And it is also op-com.china

did not manage to get this to work on my Win 7 x64 box.. when i tried for over a week ago..

NIGHTCD

[Meat-Head]

Ho hooo hoooo hello fishermens :)
How are you today, have you done something by your self?

Green & Pinky m8's > pm...
whats the pass??


Whats the password ne1?

Would nine posts in nearly two years with 2 downloads be classed
as a leeching fisherman?

DK has more than just the garage sectoion, general chat, news, comedy, pc, xbox things etc

[dik]

did not manage to get this to work on my Win 7 x64 box.. when i tried for over a week ago..

NIGHTCD64 bit os is no good for automotive software

[bibkare]

Since nobody's going to share this "no china" opcom 2010 i suggest that we try together to unpack it, attach. is from DiE, does anybody know what can disassemble it (PE Explorer doesn't work)

P.S.

I know here a few excellent unpackers ( two from my country ) so if they wanna help just to remove this "CHINA CLONE" words.

[basco]

nice to see that the guys have finally got a fully working version opcom 2010 im just waiting on my pm from rob to try it out as well.

[ironderek]

Can somebody tell me is 090821d version is much better than 090820d, and does or doesn't require activation? So all what I have to do is install that version, and connect interface and that's it? Does interface must be 1.39 version or not? Won't damage it?
And this version Opcom 082010 has to be activated or not??

[basco]

where can i download the program file?

[dik]

Can somebody tell me is 090821d version is much better than 090820d, and does or doesn't require activation? So all what I have to do is install that version, and connect interface and that's it? Does interface must be 1.39 version or not? Won't damage it?
And this version Opcom 082010 has to be activated or not??2010 version needs no activation and works well, it's for china clones so wont damage anything, not sure about 1.39 but mine is. Search the forums here ( Op-Com CHINA 08-2010 EN ) as some plonker posted the file for download - might still be there if mods haven't spotted it yet - patrian & Liteace commented so guess it's been reported.

[beats2006]

where can i download the program file?

I have 090821d, if you or anyone needs it PM me.

[drdre20013]

I have 090821d, if you or anyone needs it PM me.

082010 is newer mate

[angelx431]

[ QUOTE = tk500 ; 772738 ], както старата версия :hmmmm2:, няма различия

Ако искате ще направя 12/2012 Ver ...

това е фалшива и не е от август [ / QUOTE ]
no! no! no!

[PremierD]

[ QUOTE = tk500 ; 772738 ], както старата версия :hmmmm2:, няма различия

Ако искате ще направя 12/2012 Ver ...

това е фалшива и не е от август [ / QUOTE ]
no! no! no!

Try English mate ... you may get an answer to your post ....

[beats2006]

082010 is newer mate

Can you send me a link to that plz m8?

[dik]

Can you send me a link to that plz m8? search forums for

Op-Com CHINA 08-2010 EN

get it before member gets banned and post deleted

[dik]

Here is Ro ver.
Pass as usual...
Have a read here http://www.digital-kaos.co.uk/forums...68/#post734005

Quote moderator drakov " *URGENT* STOP POSTING AUTO SOFTWARE
There is a reason why the software section is disabled, continue to post auto software anywhere on the forum will result in a BAN, we have enough work to do with people adding to it....... "

[PremierD]

Will you never learn .... Post Software ... GET BANNED .....

[Scientist]

If you try some times the "search" it will be great! It was posted yesterday in another thread and the member can be banned for that! Also try also google and you will be supprised that this version was posted about 1 month ago!!!!
Yes i agree with that is very stupid the front page of the soft. "OPCOM CHINA CLONE", if only i knew how to remove it.........

[Meat-Head]

Yes i agree with that is very stupid the front page of the soft. "OPCOM CHINA CLONE", if only i knew how to remove it.........

Well acutally no, can be good and bad.

For example 'Meat-City-Vauxhall' KEEP borrowing the Op-com lead
to use on their customers cars to make themselves money.

SO:-

The next time they borrow it, just have to lie and say, you need out laptop
as it's now software locked - lie lie lie.

They are using this thing and these lovely words are there for all to see.

On your own use, you simply use the 'edited' file.

ON TOPIC:

As uploading software is now a 'Nil Poi' situation, what about members
start a new thread and just include a link to the 'DK Software site' instead?

[drdre20013]

Well acutally no, can be good and bad.

For example 'Meat-City-Vauxhall' KEEP borrowing the Op-com lead
to use on their customers cars to make themselves money.

SO:-

The next time they borrow it, just have to lie and say, you need out laptop
as it's now software locked - lie lie lie.

They are using this thing and these lovely words are there for all to see.

On your own use, you simply use the 'edited' file.

ON TOPIC:

As uploading software is now a 'Nil Poi' situation, what about members
start a new thread and just include a link to the 'DK Software site' instead?

How do i add software to the garage software site?

Rob

[Meat-Head]

How do i add software to the garage software site?

Rob

Damm fine question, click my signture and have a poke lol

[drdre20013]

Damm fine question, click my signture and have a poke lol

am i just being a dumb ass but i cant see anywhere to add software lol

[Meat-Head]

am i just being a dumb ass but i cant see anywhere to add software lol

sorry, can't help, try pm sminoff _rules - link to his proflie in my siggy, or look at that site and ask members who have posted lol

[carevir]

!!??Thanks we will put it on approval.

I work with 907 version (is the best), others versions (908b
908d) they have never worked to the 100%

[drdre20013]

so, did anyone manage to remove the "china clone" text from the program? If so......How?

Rob

[Itsme]

I wonder if the Chinese are trying to circumvent the copyright by advertising the fact that although the device is a clone at least the buyer is aware it is not genuine as opposed to buying something which is passed off as genuine but is counterfiet.

[Meat-Head]

Ok cool, yeah whatever NO PROBLEM, JUST A WORD OF WARNING.

Today geezer came in, with a Corsa-C wanted it so as you pressed the remote control, a second time it made the wheels grow bigger or something.

Plugged in OP-Com, no security code in the car, said to punter, watch this, went to instrument, no option to read eeprom, the art of looking foolish, asked the bloke to read the 6th 8th and 12th didgit of vin number, quickley, swapped to the last version of Op-com, read the code, thried to
programme the body control module, found the option

Door locking

"One press of remote makes wheels grow bigger" - selected yes, just sat there.

Asked the punter to read the 1, 10, 14th didgit of vin number, swapped back to the new version of Op-com, same again, selected option to make the wheels grow bigger, said yes, said it had done it, went back into still said no.

Tried the remote anyway, wheels stayed the same size!

Charged him 10 quid for the code, told him to ~~~~ of

THANK GUYS, LOVE YOU ALL LONG TIME

[bibkare]

This version is definitely beta, repacked by someone who knows the job or maybe the Hungarians themselves put it on web, in way of advertising, you know here is crippled version, it's free, buy the original if you want everything else if don't use 090714 and piss off

[bibkare]

Another strange thing, according to task manager this version uses 157 MB of RAM while previous version uses only 5 MB

[tk500]

Another strange thing, according to task manager this version uses 157 MB of RAM while previous version uses only 5 MB

bad unpacking

[mattydr67]

Mates I 'm 505 procent agree with you. but i cannot said nothing wrong about this version 08-2010.
i tell you why.
1. few time ago we asking everytime here when will show up a new crack for Op-Com.
Now we can said that it is not good or or is bad unpacked or I don't know we have something to comment about this sw.
2. Just that person who can compare the original softwera with genuine interface can talk if this version with chinese clones are bad or not.
Noone from us can said nothing wrong becasue we don't know if it is a bad crack or it is a original versions bugs.
So who don't like that please buy a genuine interface with original sw.
Good luck

[tk500]

this is based on last version with old style protection
as is so far from versions 100315x
date on main screen is totally fake

yes, new version from august exists (still without EN)

[mattydr67]

OP-COM china clone 08-2010 is crack of this version 100219
And 08-2010 is that date when the crack relised
Good luck

[basco]

working sweeeeeettt! nice one drdre20013

[drdre20013]

i cant take credit for this, im just sharing after being sent the link.

Rob

[Meat-Head]

either i'm smoking some good stuff or something.

Did i see somewhere you can read the immo code out of edc 16?

so far so good, astra h '06, DIDN'T CHANGE ANYTHING

[miguelcarromeu]

Hi

Can't seem to find the links for the 2010 version...

Anyone?

Thanks

[Meat-Head]

Hi

Can't seem to find the links for the 2010 version...

Anyone?

Thanks

nice first post.

there laughing at you

[enyckma]

nice first post.

there laughing at you

agree with you! :D


Hi

Can't seem to find the links for the 2010 version...




click him man! :reddy: (not this one)

[big sack]

I?ve tested it on my 2004 Signum, and it works perfect for me.
It updated my device to 1.39, and i can reset the service interval now. (the english version can?t)
Excellent !!!

[drdre20013]

If someone needs


Bye Bye

Rob

[nullie]

Anyone has the advanced version?!

http://www.opcom-diagnose.de/pdf/OP-COM%20Advanced.pdf

[jo?o antonio]

H? folks,

This version 082010 can damage, erase the interface ?

Thanks.

[Meat-Head]

H? folks,

This version 082010 can damage, erase the interface ?

Thanks.

Mine's ok and the one 'Meat-City-Vauxhall' got the otherday

LONG LIVE DK

[mattydr67]

No problems with the OP-COM CHINA CLONE 08-2010
It is SAFE
Don't worry about and BTW it is very good cracked.
A lot of functions that I tried works like a charm, " I can say better then original softwear itself".
Use it and enjoy.
Good luck

[DB77AAA]

Anyone has the advanced version?!

http://www.opcom-diagnose.de/pdf/OP-COM%20Advanced.pdf

I'm interested this version. What helps me? Wath contains?

[mattydr67]

Come one guys, there's no advaced version.
It is the same Op-C)m 100315 but in german and I think they have diffrent versions: orfi, advace, base.
Just like that.
on op-com.hu it is the last and full profi advance softwear.
Look here:
[URL="http://www.opcom-diagnose.de/img/opcombilder/dias-000.htm"]
Good luck

[pecky]

Vauxcom is now at 100820b, i'd expect OPCOM to be updated soon too.

[mattydr67]

Vauxcom is now at 100820b, i'd expect OPCOM to be updated soon too.

Soon?
I think you have to wayt a while.
Good luck

[nullie]

Come one guys, there's no advaced version.
It is the same Op-C)m 100315 but in german and I think they have diffrent versions: orfi, advace, base.
Just like that.
on op-com.hu it is the last and full profi advance softwear.
Look here:
[URL="http://www.opcom-diagnose.de/img/opcombilder/dias-000.htm"]
Good luck

I'm sorry but.. u're wrong! :P The advanced version is a pack of tools witch aren't distributed normally with op-com, just try to find one of those mentioned in the pdf...
For many of those u will need programers to read EEPROM's but they are still useful for some..

[mattydr67]

Maybe you got right but it is not about softwear it is about diffrent tools, diffrent revision.
Good luck

[bel677]

so, did anyone manage to remove the "china clone" text from the program? If so......How?

[mattydr67]

so, did anyone manage to remove the "china clone" text from the program? If so......How?

Yes you can
Look in the picture.
It was did buy one of our mates
So I can't give you, it was did especially for me becasue i couldn't to repack back. It didn't worked at me.
In conclusion you can change "china-clone"
So please don't contact me for this because I will not replay
Good luck

[Meat-Head]

Just for reference last got rid of a Vivaro.

In short, some donkey cut a can wire under the bonnet, this went back to the airbag controller - airbag light on - no faults stored.

Ended up using the swiss army knife with obd scanner - instaly said can error
fixed the fault, plugged in opcom - historical fault.

So might be worth waiting 10 mins to see if a fault occurs, yet light was instant.

[mattydr67]

Guys does anyone try to install this Op-Com china clone 08-2010 on W7 and it tested if it works?
Thanks
Good luck

[NIGHTCD]

Guys does anyone try to install this Op-Com china clone 08-2010 on W7 and it tested if it works?
Thanks
Good luck

using it on windows 7 x64, fine here

[drdre20013]

using it on windows 7 x64, fine here

same but need to do a selective boot to get it to work

Rob

[oep]

Hey ppl, am back...

mattydr67 thanks for putting out for me, 'cos of your request.

And special greets to Green bold leachers.... You ain't getting any new sh*it anymore (as far from me)...

eof

[Meat-Head]

Hey ppl, am back...

mattydr67 thanks for putting out for me, 'cos of your request.



Welcome back. Hope you have NO hard feeling against member mattydr67. He is a member worth taking a holliday for - (as long as more more than 3 mins) - no member is worth that much - unless Tracy Barlow joins.

[mattydr67]

I'm sorry guys but I'm not understandin you well.
What I did wrong?
@oep whats wrong? I did a request to you, ok and Did I share something that you send me?
No and I didn't puted you out. I'm sorry for you but I'm telling you that you blame a wrong guy if it is what you thought.
Can you explain to me?
Please.
Good luck

[drdre20013]

FFS people, i set this thread up to help people not so you can have a pop at each other, keep it on topic please

Rob

[mattydr67]

Sorry but I cannot say anything when someone blame you for nothing.
I just asked him to explain to me and I did asked him in PM which he could do it the same before postings this crap about me.
I can say nothing more.
Good luck

[Weener]

Updated mine today. No problems, all working perfectly.

Thanks Rob and thanks for your help earlier.

Dean

[Coloser]

I have a friend OPCOM china works ok but with softwer and 080920 [and a 1.39.
I can seamlessly use the latest software they are talking in this post.

[drdre20013]

I have a friend OPCOM china works ok but with softwer and 080920 [and a 1.39.
I can seamlessly use the latest software they are talking in this post.

yes you can

[AKL]

hello,

could anyone send me the new opcom software????



many thanks in advance...

[swany99]

search the net, no downloads on site

[basco]

everything's being censored m8 no more freedom of internet look at WikiLeaks!

[dealerdon]

Hi to all,

Can anybody send me a working link with op-com 08-2010 hungarian language via PM or the software to my e-mail adress?

Thanks a lot...

[manocao]

see last superlinks here http://www.digital-kaos.co.uk/forums/f173/automotive-software-collection-manocao-77948

[e.t.]

Hi!

Hat schonmal einer von euch ein Z20LET Steuerger?t an die Wegfahrsperre angemeldet?

Ich weiss nicht genau in welchen Men?punkt ich da rein muss.

Vielleicht k?nnt mal einer eine kleine Anleitung dazu machen der das schon gemacht hat.

Danke!










Hi! Has one of you already announced a Z20LET control device to the immo? I do not know exactly in which menu point I there purely has to go. Maybe can do sometimes one small instructions this this has already done. Thank you!

[dealerdon]

see last superlinks here http://www.digital-kaos.co.uk/forums/f173/automotive-software-collection-manocao-77948


It is true, that I was drunk, but I cannot find in hungarian language :-(

[manocao]

just 3 words to google: mix opcom linki

[manocao]

last opcom fixed version includes drivers for generic ftdi interface pid_6001 instead of pid_4F50 ???? is there a new version of opcom hardware with generic ftdi pid? or is it a mistake?

[manocao]

it is a mistake
now solved with right drivers

[manocao]

just for info:
released new oficial opcom version 110110a
NOT for china clones!!! it will KILL your interface
only in hungarian
Innen tel?ltheti a legfrisebb magyar nyelv? OP-COM verzi?t (http://www.op-com.hu/Downloads_HU.aspx)

[huettenkeuler]

There is also a german 110111a
OP-COM - Updates (http://www.opcom-diagnose.de/updates.html)

It updates the OP-COM to FW Version 1.43 which will still work with the old OP-COM CHINA 08-2010 (at least communicate... my car is currently not around).
It is not killing you device. It just updates it to 1.43 which still works with old versions...
But the 110111a-software itself won't let you diagnose:
There are at least two stages, one is detecting a _wrong_ interface and exits the program and another one that is requesting the serial...

I would guess: Borland Delphi 6.0 - 7.0
Packed with PECompact 2.x -> Jeremy Collake [Overlay]
Resulst in >100MB executable when unpacked...

So if anyone can handle Delphi debugging... :)

[mattydr67]

There is also a germen 110111a
OP-COM - Updates (http://www.opcom-diagnose.de/updates.html)

It updates the OP-COM to FW Version 1.43 which will still work with the old OP-COM CHINA 08-2010 (at least communicate... my car is currently not around).
But the 110111a won't let you diagnose:
There are at least two stages, one is detecting a _wrong_ interface and exits the program and another one that is requesting the serial...

I would guess: Borland Delphi 6.0 - 7.0
Packed with PECompact 2.x -> Jeremy Collake [Overlay]

So if anyone can handle Delphi debugging... :)

What do you mean?
Do you wanna said that you can upgrade the firmwear with this sw without killing it?
Did you try it to upgrade the firmwear and then try with OPCOM 08/2010 and nothing happens to your interface?
Thanks
Good luck

[Tom_x]

fw updated to 1.43, and maybe work with old software..

The most problem for debugging exe,and crypted scripts. New software not use opcomrd.dll, all interface routines implemented into the main exe.
If someone working on this, pls contact me in PM

[huettenkeuler]

What do you mean?
Do you wanna said that you can upgrade the firmwear with this sw without killing it?
Did you try it to upgrade the firmwear and then try with OPCOM 08/2010 and nothing happens to your interface?
Thanks
Good luck

Like Tom_x said... It is not killing you device. It just updates it to 1.43 which still works with old versions...

[blackpirate]

There is also a german 110111a
OP-COM - Updates (http://www.opcom-diagnose.de/updates.html)

It updates the OP-COM to FW Version 1.43 which will still work with the old OP-COM CHINA 08-2010 (at least communicate... my car is currently not around).
It is not killing you device. It just updates it to 1.43 which still works with old versions...
But the 110111a-software itself won't let you diagnose:
There are at least two stages, one is detecting a _wrong_ interface and exits the program and another one that is requesting the serial...

I would guess: Borland Delphi 6.0 - 7.0
Packed with PECompact 2.x -> Jeremy Collake [Overlay]

So if anyone can handle Delphi debugging... :)


unpacked has 145 MB! guess are big resources files!

if anyone needs it PM.

[mattydr67]

Like Tom_x said... It is not killing you device. It just updates it to 1.43 which still works with old versions...

Thank you so much
I tried and I upgraded to 1.43
I will test on a car later.
Good luck

[Tom_x]

I think upgraded firmware (1.43) not better than 1.39 for old,cracked software.
Somene have original interface?

[mattydr67]

I don't know now if it is better or not becasue I haven't tested yet but who know. If we don't make test we can't say NOT better. Maybe it not became with something new or maybe it comes with something wrong. Once again I will say: Whithout test we can't say anything.
I will try to make some tests in this futhure days and I will tell you how it'll work.
Of course the new firmwear it is good for new release for sure.
Good luck

[blackpirate]

There is also a german 110111a
OP-COM - Updates (http://www.opcom-diagnose.de/updates.html)

It updates the OP-COM to FW Version 1.43 which will still work with the old OP-COM CHINA 08-2010 (at least communicate... my car is currently not around).
It is not killing you device. It just updates it to 1.43 which still works with old versions...
But the 110111a-software itself won't let you diagnose:
There are at least two stages, one is detecting a _wrong_ interface and exits the program and another one that is requesting the serial...

I would guess: Borland Delphi 6.0 - 7.0
Packed with PECompact 2.x -> Jeremy Collake [Overlay]
Resulst in >100MB executable when unpacked...

So if anyone can handle Delphi debugging... :)


unpacked exe
Download op com.rar from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/unqokz)

i didnt test it on any interface! use it on your own risk!

[mattydr67]

unpacked exe
Download op com.rar from Sendspace.com - send big files the easy way (http://www.sendspace.com/file/unqokz)

i didnt test it on any interface! use it on your own risk!

It is a "medicine" version?
Good luck

[blackpirate]

It is a "medicine" version?
Good luck


no! just unpacked exe!

[tk500]

... and sections must be reallocated

[Tom_x]

OK, test it, maybe work as 1.39

I just say, we can't do anything by upgrading our interfaces...
Btw the fw update not run normal mode, i mean in settings/interface test menu, only when you press diagnose, and software update fw in background.


I don't know now if it is better or not becasue I haven't tested yet but who know. If we don't make test we can't say NOT better. Maybe it not became with something new or maybe it comes with something wrong. Once again I will say: Whithout test we can't say anything.
I will try to make some tests in this futhure days and I will tell you how it'll work.
Of course the new firmwear it is good for new release for sure.
Good luck

[mattydr67]

I tested and it's working OK.
I'm not pretty sure that it's working better then 1.39 becasue this firmwear it is created for new release of OP-COM.
To be compleatlly sure it's need more tests.
Good luck

[tk500]

new in fw after 1.41 is additional security step before the execution of bootloader
and cannot make fw downgrade with good old FUT (new ???)

can some one make tests with this new fw on engine ecu with old protocols as kw80,kw81 (?)

[mattydr67]

Today I did a test on an Astra G 2000 1.6 X 16 SZR
Everything what I did, it works ok.
Good luck

[huettenkeuler]

I tried FW 1.43 with the 08-2010 version on Corsa B with X12SZ engine...
KWP 81 initializing but no data is coming in... Instead it is re-initializing the KWP81 protocol again and again...

Edit: Same car with 1.39 and 08-2010 was working like charm!

[tk500]

I tried FW 1.43 with the 08-2010 version on Corsa B with X12SZ engine...
KWP 81 initializing but no data is coming in... Instead it is re-initializing the KWP81 protocol again and again...

on the same car with 1.39 ?

[mattydr67]

For this kind of protocols Is its necessary to make some settings?
I mean to change the default Interblok and Interbyte from 2?
This it was an enigma for me. KKL interface don't works with this protocols if don't set the latency at 1 or 2. Is this setting the same thing?
I tried with 1.39 on a Calibra and never connected.
One more thing. Please replay on what kind of car with this protocols you can connect and on what you don't.
Thanks
Good luck

[huettenkeuler]

on the same car with 1.39 ?

Edit: Same car with 1.39 and 08-2010 was working like charm!

[incar]

OK, i tested it, it works with 1.39 and OP-COM 100219a. Main diagnostic functions works beter than 090820b especialy measuring blocks.
With new feature i whas even able to read dump from Vectra B clocks, but ther is few things to know. Its quite unstable, ther is no confirmation progress bar or something that confirms process of reading or writing, you can only notice that by how adress changes on a left botom corner of the window. When i readed it whas showing wrong miledge so i readed dump and recalculated with NYO and writed back. On first attemt on a midle of writing it hungt. I restarted controler and writed ageen and sucsess, it works!!! So be carefull.

[dimitar]

OK, i tested it, it works with 1.39 and OP-COM 100219a. Main diagnostic functions works beter than 090820b especialy measuring blocks.
With new feature i whas even able to read dump from Vectra B clocks, but ther is few things to know. Its quite unstable, ther is no confirmation progress bar or something that confirms process of reading or writing, you can only notice that by how adress changes on a left botom corner of the window. When i readed it whas showing wrong miledge so i readed dump and recalculated with NYO and writed back. On first attemt on a midle of writing it hungt. I restarted controler and writed ageen and sucsess, it works!!! So be carefull.


WTF mate we are talking about 110111a german version not 100219 which is one year old

[mattydr67]

Even you upgrade the firmwear the new sw need activation.
For now you can use just old versions.
Good luck

[Tom_x]

Actually all new update (100315 and 110110) won't detect clones as opcom interface. I think activation code will not problem, if we can crack the new update.

If someone tried debugging the newest update, now impossible to patch opcomrd.dll (that dll was the ftdi ID reader for old versions), because no opcomrd.dll. Now no way dll patching, only exe crack, or other trick...

[mishu_b]

...
into attached file you can find the last fw ".hex" for 1.43.

all the best!

[mattydr67]

Nice work Mishu.
Thanks for your great work.
Good luck

[huettenkeuler]

Over at efox (http://www.efox-shop.com/opel-diagnose-tech-2-op-com-obd-obd2-aad001-can-interface-tools-fabrikverkauf-diagnoser-opelfahrzeuge-p-103232) they are selling a version with
"Voll Version 2011 Software f?r Opel"
which suggest a 2011 version.


Might be a fraud because they are talking about 1.39 FW, but might be working... We'll know when someone oders it and reports back.

[tk500]

small error, version probably is 2012

100820 - firmware 1.41 from 2010
110110 - firmware 1.43 from 2011

[peko]

hi friends

can you post foto from interface about this software ?
i will buy it but need work on new cars with multiplexer-cable

thanks ;)

[huettenkeuler]

can you post foto from interface about this software ?

Tried the link two posts before yours?

Alternatives:

cardiag.co.uk (http://www.cardiag.co.uk/op-com-2009-v-can-obd2-opel-40.html)
autodvdgps.com (http://www.autodvdgps.com/opel-opcom-diagnostic-interface-usb-can-obd2-p-1060.html)

[jratko]

I have opel Vectra 1.7 td Is it working with it.

[mattydr67]

I have opel Vectra 1.7 td Is it working with it.

Yes it is.
Good luck

[ironderek]

What is the latest fully working firmware/software for chinese cables which won't damage it? Is that version from mishu_b fully working with chinese interfaces?
At the moment I have 1.39 with 08210 software wich works ok. Is it any newest version?

[mattydr67]

What is the latest fully working firmware/software for chinese cables which won't damage it? Is that version from mishu_b fully working with chinese interfaces?
At the moment I have 1.39 with 08210 software wich works ok. Is it any newest version?

First of all the firmwear can't demage the interface.
Mishu_b uppgraded his interface firmwear using the last sw 110111a_de and the his read his interface and he save the dump.
What he share here is the dump for the PIC for last firmwear 1.43
If you want to use his dump you will need to rreprogramm your tool with an external programmer.
The last good softwear is op-Com China Clone 08/2010 and it's working with firmwear 1.39 and with 1.43 as well.
Good luck

[huettenkeuler]

The last good softwear is op-Com China Clone 08/2010 and it's working with firmwear 1.39 and with 1.43 as well.

I cannot confirm this. With 1.43 and 08/2010 I could not get KWP81 to work. Same car, same device and 1.39 works like charm. 1.43 NOT!
Just as a sidenode.

And: you canot use OPComFUT to go to back to 1.39, be aware.
To go back to 1.39 look at: Repair Op-com Hardware Procedure? (http://www.digital-kaos.co.uk/forums/f152/repair-op-com-hardware-procedure-156380/)

[mattydr67]

I cannot confirm this. With 1.43 and 08/2010 I could not get KWP81 to work. Same car, same device and 1.39 works like charm. 1.43 NOT!
Just as a sidenode.

And: you canot use OPComFUT to go to back to 1.39, be aware.
To go back to 1.39 look at: Repair Op-com Hardware Procedure? (http://www.digital-kaos.co.uk/forums/f152/repair-op-com-hardware-procedure-156380/)

Tell me on what car did you tried to make a test by myself, please. Becasue I tested on a lot of cars and I haven't any kind of this problems.
With 1.39 on Tigra I could connect but it disconected quickly
Thanks
Good luck

[huettenkeuler]

Ok, you are right: it connects but before you can do anything it reinitializes. So: Since you cannot do anything usefull, it does not work :)

Tried on Corsa B with X12SZ engine.

[ironderek]

First of all the firmwear can't demage the interface.
Mishu_b uppgraded his interface firmwear using the last sw 110111a_de and the his read his interface and he save the dump.
What he share here is the dump for the PIC for last firmwear 1.43
If you want to use his dump you will need to rreprogramm your tool with an external programmer.
The last good softwear is op-Com China Clone 08/2010 and it's working with firmwear 1.39 and with 1.43 as well.
Good luck

Don't worry, I know that Pic18f458 has to be reprogrammed with external programmer :)
What I asked was if 1.43 firmware works ok with chinese cables, and what is the latest and safeest software which can be used with it.
Cheers.

[mishu_b]

...
also I confirm that fw 1.43 working on 08/2010 no issue up to now! tested on CAN and KWP2000

br

[jack63]

There are three or more versions of PCB and set of chips and relays!
IMHO You should compare PCB.
What is the difference?
mishu_b's interface works OK with FW 1.43 but huettenkeuler's interface don't???

[mattydr67]

There are three or more versions of PCB and set of chips and relays!
IMHO You should compare PCB.
What is the difference?
mishu_b's interface works OK with FW 1.43 but huettenkeuler's interface don't???

So what?
Mine works great on all protocols supported includin Iso, Kwp2000, Kw81 and 82.
I asked huettenkeuler to tell us on which car didn't work well.
Me and mishu_b we have possibility to check this adn of course we aren't alone. Is ther another posibility to find and confirm from 3 sources at least.
I haven't seen another one who complain about this just our mate huettenkeuler.
So we need to check if it is how it is say, I mean if it is in general or it is just one case, his case with his tool.
In conclusion we have to check and we need more reviews.
For me works great and I tested on several diffrent cars.
Good luck

[cosmind]

I have this type of OPCOM and is not working on pin12. What can I do?

http://www.digital-kaos.co.uk/forums/attachments/f166/48268d1296316971-cloned-op-com-v2010-big-issue-img_0171.jpg
http://www.digital-kaos.co.uk/forums/attachments/f166/48267d1296316971-cloned-op-com-v2010-big-issue-img_0170.jpg

[jack63]

Check resistor R32. It should be 510 ohm. Sometimes is 10k.

[cosmind]

yes, R32 is marked as 103, 10k. I will try with 510ohm

edit: I tryed with R32 510ohm and does not connect to all

[jack63]

You've made something wrong or you've got faulty relays. Try re-solder resistor and relays. They look like after hurricane.
Here is post about fixing the same PCB - 21BV3. Use google translator.
link (http://peb.pl/4121059-post848.html)

[ironderek]

Any idea where can I buy those relays UB2-4 5NUN, or them replacements ?

[stevecrk]

In China, perhaps? ;)

[ironderek]

In China, perhaps? ;)

Could you be more specific :questionmark:

[stevecrk]

Just ask your supplier, they should have this in stock...

Only downside of this, that you need to wait for the end of the so called spring festival. ;-(

Did you try google ? I'm sure, the solution is out there somewhere.....

[art64]

It seems the file Opcom 082010 from the first post was deleted? It's illegal?

[Tom_x]

Maybe try select different interface type in settings menu. C or D type, and try connect.


I have this type of OPCOM and is not working on pin12. What can I do?

http://www.digital-kaos.co.uk/forums/attachments/f166/48268d1296316971-cloned-op-com-v2010-big-issue-img_0171.jpg
http://www.digital-kaos.co.uk/forums/attachments/f166/48267d1296316971-cloned-op-com-v2010-big-issue-img_0170.jpg

[jack63]

ironderek It 100% clone! Don't try C or D type! It should by type B!
Try "test interface" in program. If test failed you've cleared the PIC.
Did you read the link?
First ask the supplier. Tell him that something is wrong. Often they send the new one.
Few people have got two opcom's. One bad and one OK.

[mattydr67]

It seems the file Opcom 082010 from the first post was deleted? It's illegal?

Read the rules and you'll see why it was deleted.
Good luck

[einet]

Hello,

One question!
I have Op-Com 1.39 090820B and cam put the new or the last FW on this!

What is concret the last FW and software that work in this interface?

thanks
einet

[mattydr67]

Me I use it now with 1.43 and it works great but you can use 1.39 becasue the 1.43 it is necessary for new softwears.
Good luck

[einet]

Dont understand!

I mean that i can flash the new FW 1.43 and than can use the old software and the new one?

thanks

[angelx431]

Dont understand!

I mean that i can flash the new FW 1.43 and than can use the old software and the new one?

thanks
Exactly.....

[mattydr67]

Yes old softwears work with new firmwears but new softwears dosen't works with old firmwears.
It is something like this.
Good luck

[tk500]

Yes old softwears work with new firmwears but new softwears dosen't works with old firmwears.
It is something like this.
Good luck

not exactly, for op-com is not entirely possible downgrade firmware compatibility

latest firmware version from yesterday is 1.44

This product has quite bad software and firmware, unlike vcds

[dimitar]

forget about opcom . Has anyone of get your dirty hands on OPCOM ADVANCED version

[mattydr67]

not exactly, for op-com is not entirely possible downgrade firmware compatibility

latest firmware version from yesterday is 1.44

This product has quite bad software and firmware, unlike vcds

For firmwear after 1.39 you need to reprogramm it using an external programmer not with OPCOMFut.
Tell me if you tried to upgrade it at 1.44 just like to 1.43 and it wasn't erase the PIC?
Good luck

[tk500]

Firmware is not problem
upgrade/downgrade

[mattydr67]

Firmware is not problem
upgrade/downgrade

Let me understand.
Did you upgraded it to 1.44 with 110207a_EN?
Thanks
Good luck

[manocao]

just for info:
released new oficial opcom version 110110a
NOT for china clones!!! it will KILL your interface
(edit: it wont kill your interface as dk users have reported)
only in hungarian
Innen tel?ltheti a legfrisebb magyar nyelv? OP-COM verzi?t (http://www.op-com.hu/Downloads_HU.aspx)


what about new english version 110207a?
Here you can download the latest OP-COM software update (http://www.op-com.hu/Downloads_EN.aspx)
kills interface? includes firmware 1.43, 1.44 or later?
still wont let you to downgrade firmware to 1.39 by using opcomfut?
anyone tried?
come on! lets keep this thread alive!!

[armstma1]

110207a doesn't kill interface it forces 1.44 then doesn't work. still works on older software though

[underv0ltage]

Why it wont work with firmware 1.44? Maybe a copyright protection?

[[]]

[manocao]

because it detects no original hardware but clone
at least it doesnt kill the interface

[mishu_b]

...
I didn't succeed to downgrade at 1.39 using OPCOMFut.
- for downgrade, it needs to use external programmer.

atb

[Barm76]

I read that v.082010 Chinese clone kills Airbag block when you start scanning errors. Is this true?

[baracuda26]

I read that v.082010 Chinese clone kills Airbag block when you start scanning errors. Is this true?

you mean last software v082010 that working with chinese clone? -> not true
I have reed two corsas 2009 and 2010 with no problems

[mishu_b]

I read that v.082010 Chinese clone kills Airbag block when you start scanning errors. Is this true?

I'm using this software since months and no issue with it.

Who tells you this?

atb

[calpacint]

Need help," Sorry, but a fatal error occured! Please contact developer!."When I test interface. What went wrong with op-com.
My op-com was work ok,early of the week,readed two car;Zafira 1.8 & 2.2 year 2002.And then suddenly ,on Feb 26,I have install Vag-com on the same machine.now Vag-com is work ok . but op-com does not work. I would appreciated if you guys could give me some advise how to solve this problem.Is there any chance to get it back to work .
Have a good one.
Peter

[mishu_b]

....
1. plug in the Op_Com interface into USB port
2. is it detected as Op-COM or is it detected as Ross-Tech? (you will find these info under: system / device manager)

atb

[calpacint]

....
1. plug in the Op_Com interface into USB port
2. is it detected as Op-COM or is it detected as Ross-Tech? (you will find these info under: system / device manager)

atb
Hello Mishu_b
Detected as Ross-Tech. How can I change it or else?
Thanks for your help.
Have a good day all.
Peter

[manocao]

use mprog to edit opcom interface eeprom
http://www.ftdichip.com/Resources/Utilities/MProg3.5.zip

use attached template

[ducky2002]

sorry forget to quote...its related to the entry from tk500 and

manocao
-------
because it detects no original hardware but clone
at least it doesnt kill the interface


what do you mean with doesn't work. i think you tried to generate a valid license with the copy request code to repsponse code method, or am i wrong? i you do so the license.dat is invalid and the eculist and other files cannot be decrypted. the decrypt method is completly different from the old 100315 version. for the 100315 version i know how to decrypt the files but for the new 2011 version its not possible that way. they use rc4 algo to decrypt and then decompress it and this seems to be in relation with the lic file.

[mishu_b]

Hello Mishu_b
Detected as Ross-Tech. How can I change it or else?
Thanks for your help.
Have a good day all.
Peter

how to precede with Mprog.
1. plug the interface (Op_Com) in to USB
2. run Mprog.exe
3. go to under MProg/Tools and push "Read and Parse"
4. go to under MProg /File and push "Open" - open the file provided above
5. go to under MProg/ Device and push "Program"
6. look into below window of the "MProg" - "successful programed one device"
7. unplug from USB port the cable
8. plug again into USB port the cable - now it will show you the message "OP-COM Interface V2"

That's all.

push thanks!

[csonghy]

Any news, about this year Opcom version?
I mean, a working clone . . :egg:

[calpacint]

how to precede with Mprog.
1. plug the interface (Op_Com) in to USB
2. run Mprog.exe
3. go to under MProg/Tools and push "Read and Parse"
4. go to under MProg /File and push "Open" - open the file provided above
5. go to under MProg/ Device and push "Program"
6. look into below window of the "MProg" - "successful programed one device"
7. unplug from USB port the cable
8. plug again into USB port the cable - now it will show you the message "OP-COM Interface V2"

That's all.

push thanks!
Many thanks to Manocao & Mishu_b, you guys save my As..
Have a good evenning .
Thanks again.
Peter

[e.t.]

Hi!

Does it also reprogram the clone with MPROG?

Is it the same as the OP-COM Advance?

Is there a German software?

Thanks

[teerak2uk]

MPROG is used to repair the clone after corruption when trying to use the new original version software

[mishu_b]

...
You need "MProg" to fix problem related to driver compatibility - if the uC is empty you need to re-flash with external programmer. (ICD2, ICD3 etc)

atb

[eifeldragon]

Are there any news for OP-Com for china?
What is the latest Version vor FW 1.39?
I`ll be happy for a download-link
THX

[mattydr67]

you need just FW 1.39 to work with the lastest cracked sw.
Well you can upgrade the firmwear to 1.44 and it will works too.
BTW download link....maybe just in privat because it is against the rules to post softweras here.
Good luck

[manocao]

Hi, I would like to deactivate the warning for the safety belts for a Insignia 2011 with the OP-COM China Clone. Currently I'm using a 2010 software which is able to read some things, but programming is not possible. Is there any new software from 2011. Where should I seek for such a software?
Sorry I'm really a newcomer in this....

anyone can help?

[teerak2uk]

I think only full verson (not clone) has all functions for insignia

[mattydr67]

You mean the newest version ( which is not cracked yet ) I suppose.
Good luck

[teerak2uk]

You mean the newest version ( which is not cracked yet ) I suppose.
Good luck

yes the latest version

[Meat-Head]

I think only full verson (not clone) has all functions for insignia

that is good, you can tell folks to ~~~~ off with their piles of inbred car

[UfOuN]

hi, please report, i search 8-2010 in CZ langugage if exist. thanx

[manocao]

it doesnt exist
only DE, EN, HU, NL, PL and RO
just 3 words to google: mix opcom linki

[szwajcarek]

Hi
COuld someone please share in PM the OPCOM 090714 version because my 082010 is not able to reprog pSG16 and I have heared that xxx714 can. Thanks in advance.

BR

[bordom]

To:
szwajcarek (http://www.digital-kaos.co.uk/forums/members/73102-szwajcarek/)
You have mail.

[elektro128]

Hi
COuld someone please share in PM the OPCOM 090714 version because my 082010 is not able to reprog pSG16 and I have heared that xxx714 can. Thanks in advance.

BR

No problem


Version OK 100% correct

[szwajcarek]

Hi
Big Thanks to you guys, solved !!!

BR

[manocao]

more last EN version links
http://www.digital-kaos.co.uk/forums/f172/need-help-activate-opcom-197689/#post1033189
http://opcomforum.yolasite.com/software.php

not newer yet?

[zeca]

hi
OPCOM has someone who can share in Portuguese
thanks

[jo?o antonio]

No mate , only in english

[attila24]

how can i upgrade 1.39 to 1.43or 1.44 thanks.

[mattydr67]

how can i upgrade 1.39 to 1.43or 1.44 thanks.

Using dumps or using newest softwears.
Good luck

[mishu_b]

how can i upgrade 1.39 to 1.43or 1.44 thanks.


what is your reason to upgrade your tool?
do you have any new software to use with it?

atb

[attila24]

what is your reason to upgrade your tool?
do you have any new software to use with it?

atb
when i try something erase opcom pic. so i want to reupload new firmware.

[mishu_b]

...
sorry I do not get the point!

let me summarize your issue:
- you tried one Op-Com sw version and your PIC now is empty?

atb

[attila24]

...
sorry I do not get the point!

let me summarize your issue:
- you tried one Op-Com sw version and your PIC now is empty?

atb
as a matter of fact i puted 1.43 hex information in to 1.39.and than flashed via opcom fut.after i did that op-com now doesnt working.

[mattydr67]

as a matter of fact i puted 1.43 hex information in to 1.39.and than flashed via opcom fut.after i did that op-com now doesnt working.

1.43 oe 1.44 you cannot update by OPCOMFut just with external programmer or much easy using newest OP-COM sw.
Good luck

[attila24]

1.43 oe 1.44 you cannot update by OPCOMFut just with external programmer or much easy using newest OP-COM sw.
Good luck
thanks a lot

[mishu_b]

...
what is now the result of OCOMFut?

fw=?

all the best

[autochampion1]

Try OPCOMLoader. Version 1.33, 1.39, 1,43, 1.44. All Works.

Connect OPCOM, start program, change nothing, press the left button. Waiting.....

GL

[mishu_b]

...
I hope it is nice - on my computer it does not work.

atb

[Anydraj]

Install Micr***t NetFramework 3.5

[ogo777]

tnx autochampion1
really easy upgrade firmware with your loader
cheers

[DB77AAA]

Try OPCOMLoader. Version 1.33, 1.39, 1,43, 1.44. All Works.


Thanks!

(I think dont work with empty PIC?)

[manocao]

Try OPCOMLoader. Version 1.33, 1.39, 1,43, 1.44. All Works.

Connect OPCOM, start program, change nothing, press the left button. Waiting.....

GL

any version in english?

[Tempesta48]

What's the point in changing the fw but not the software? The last software available is from August 2010, right?

Salut!

[Peter0961]

Try OPCOMLoader. Version 1.33, 1.39, 1,43, 1.44. All Works.

Connect OPCOM, start program, change nothing, press the left button. Waiting.....

GL

:cheer:
Hallo,
dont work with empty PIC.
I have testet Win7 and China Clone with emty PIC.
:pcguru:

[mishu_b]

...
from my point , correct me if I'm wrong - this software is similar with OPCOMFut! doesn't i?

atb

[SnipeR24]

Than to generate a license for the 2011 version? Here you can download the latest OP-COM software update (http://www.op-com.hu/Downloads_EN.aspx)
Firmware to see everything OK but requires registration

[bmotor60]

Than to generate a license for the 2011 version? Here you can download the latest OP-COM software update (http://www.op-com.hu/Downloads_EN.aspx)
Firmware to see everything OK but requires registration





China clone KILLER!!!!!!!!!!!!!

[SnipeR24]

I updated the firmware to 1.44 is working fine and did not kill all OK

[andrew_brest]

How to update china OPcom 1.39 to 1.44 ?

[mattydr67]

How to update china OPcom 1.39 to 1.44 ?

Using new original softwear like 110207a from here Here you can download the latest OP-COM software update (http://www.op-com.hu/Downloads_EN.aspx)
But take care don't use the previos one.
Good luck

[Tempesta48]

Using new original softwear like 110207a from here Here you can download the latest OP-COM software update (http://www.op-com.hu/Downloads_EN.aspx)
But take care don't use the previos one.
Good luck

Can you use that software with a clone opcom? Doesn't it need registration?

[mattydr67]

No you cannot use new softwears with clone interface.
Just you can make a firmwera update.
That's all
Good luck

[Peter0961]

No you cannot use new softwears with clone interface.
Just you can make a firmwera update.
That's all
Good luck

:stupid:
Firmware-update, but old Software ??
What is the advantage for a firmware update?

[mattydr67]

Advantage.... ? I don't know if it is one. Maybe, but I did a lot of test and I haven't seen anything better, few function that it dosen't works well with the 1.49 firmwear.
But how I said I haven't seen anything better.
I work very well with 1.39 and/or 1.43 and 1.44
OP-COM 08-2010 China Clone work well with all this firmwels.
Good luck

[Admirali]

Everything is working except infotainment system.:top:

[NIGHTCD]

is there anyone that have the file dcorsadis_gid.mbf ?

need this to program board computer on my mothers corsa d..

[manocao]

Try OPCOMLoader. Version 1.33, 1.39, 1,43, 1.44. All Works.

Connect OPCOM, start program, change nothing, press the left button. Waiting.....

GL

with opcomloader you can try last 1.44 firmware with opcom 100219a and then go back to 1.39 if you like, no problem at all, of course if you have never started any 2011 official opcom version with interface plugged in computer (which would have upgraded to 1.43 or 1.44 but disabling bootloader) or some 2010 version which erased your interface's pic

that's my case, i have gone 1.44 and then 1.39 without problems, of course i never tried official version with my interface so its bootloader is untouched

2011 official software installs new firmware with a modification. The modification runs not the old bootloader, instead he runs the main code

if you already upgraded interface by means of official software and you want to go back to 1.39, maybe it's cheaper and easier to buy new interface from ebay, just from 31euro, than buy a programmer interface and reprogram because it is very difficult to solder some wires to pic chip. i think interfaces from ebay still come with 1.39 firmware, but take into account that new hardware versions may have the resistor problem which have to be changed from 10k to 510 ohm to make interface read from pin 12
see here opcom.freeforums.org • View topic - OP-COM Clone Hardware 5 Relay yellow PCB (http://opcom.freeforums.org/op-com-clone-hardware-5-relay-yellow-pcb-t612.html)

here is alexre's opcomloader with 4 last firmwares
http://www.digital-kaos.co.uk/forums/f152/opcom-082010-a-161300/index15.html#post1100066
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=WW3A05OO)

firmwares included with opcomloader are totally different to those included with opcomfut (different size and therefore crc32)
because the ones inside opcomloader inlcude also bootloader
here is opcomfut http://opcomforum.yolasite.com/software.php

this is what opcomfut reads from my interface upgraded by opcomloader to firmware 1.44

[manocao]

i have noticed the only difference between upgrading-downgrading with opcomfut and opcomloader is that you get different number in line 8 "Interface opened. Handle:" when checking version with opcomfut
i suppose because of different firmware files (.fw and .hex) which include bootloader or not

by the way, the correct sequence for upgrading-downgrading with opcomloader is:

Connect OPCOM, start program, change nothing, press the left button, "select .hex firmware file", Wait untill process is finished..... close the new window and then the program

[manocao]

opcomloader and help in english (thanks to olegario and tadz)
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=U8UIMUZM)

2 windows still in russian:
in you try to upgrade with interface unplugged it says "interface not found"
when process has finished i dont know what it says but i guess it says something like "finished"

author alexre promised to translate the whole program but he needs time, source code was lost and then he must reprogram it all
anyway above translation is enough for the job

edit:
opcomloader in english full (http://www.digital-kaos.co.uk/forums/f152/opcomloader-russian-english-please-219141/#post1191881)

[manocao]

repair opcom:
this video shows how to solder a wire to a pin of an IC chip
this guy do it so easy...
http://www.youtube.com/watch?v=SSJGnDHKFQ8

[mishu_b]

...
for this operation it depends about your handy skills - I know persons which can not change the battery from the lamp!!!! there is no space to talk about such skills.

atb

[mishu_b]

...
I need one answer from you:
Anyone has one OP-COM tool functional with both protocols KWP and CAN with L9637D inside?

Why I'm asking - I have few of this tools (Op-Com interfaces) with this device in but nor functional on KWP.

looking for your answer!
atb

[jolidj]

i have this.
OP-COM v1.44 DIAGNOSI AUTO OPEL 1996-2011 opcom su eBay.it Altro, Accessori Auto, Auto ricambi e accessori (http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=160608712152&ssPageName=ADME:X:AAQ:IT:1123)

can upgrade this???
thank you.

[mattydr67]

I don't think that you have that softwear version
Can you share it or sent it by PM
Because it is a fake or it is the last "medicine" softwera 100219a
Good luck

[jolidj]

yes i have this sw.the sw missing the key code.
for one license.
I gave me the seller.

[mattydr67]

And you think that your tool will work after you'll try to use this softwear?
Ok, I will wait you with repalys and to tell us if your tool will stil "alive" after this.
Good luck

[jolidj]

the tool work so fine with this this sw.