Renault clio II sirius 32n immo !!! off

[mariooo]

Ciao a tutti non riesco a rimettere in moto questa macchina
Renault clio II 8v siemens sirius 32n
tipo ecu : 8200162378 - S110115000B

Allego il file ori decodificato >bin e il file scodificato con data explorer manager 6.50 scp decoder >bin

La scodifica sembra fatta ma resta acceso stop + led rosso fisso

Ho controllato prima di accendere ma il pin 58 ? vuoto non c'? nessun filo ..
Qualcuno di voi ha un file vergine ?? oppure una scodifica che funziona
Aiutooo Aiutoo

[mariooo]

Hello everyone I can not restart this machine
Renault Clio II 8v siemens sirius 32N
ECU type: 8200162378 - S110115000B

I enclose the original file decoded> bin and the file manager explorer scodificato dated 6:50 scp decoder> bin

The scodifica seems made but remains on steady red LED stop

I checked before turning the pin 58 is empty but there is no thread ..
Some of you have a blank file? or one that works scodifica
Help

[motor6605]

hello
Test your files immo off and clear.
Post report please.

[mariooo]

hello
Test your files immo off and clear.
Post report please.
MOTOR6605 Thanks, I try your file and clear sir32 immo off sir32 ...
I remind you that my ECU is mounted on siemens sirius 32 N Renault Clio 2, 1200cc 8 val.
You which program you have scodificato?Ascolta
Trascrizione fonetica

[motor6605]

It's your dump off for siemens sirus 32.
Not tested.
attend reply for you.
Thank

[mariooo]

It's your dump off for siemens sirus 32.
Not tested.
attend reply for you.
Thank

Your file (immo off sim32) has the CKS wrong ... now I feel I know labels, I hope it works

[mariooo]

Your file (immo off sim32) has the CKS wrong ... now I feel I know labels, I hope it works


The files contained in the clio2.rar I tried them and do not work .. can someone help?:hmmmm2:

[PierreTheron]

Hi
Do a search on 29f200 immo off on this site.
A file posted by Busaman can immo off this ecu
RegardsIMDB:

[mariooo]

Hi
Do a search on 29f200 immo off on this site.
A file posted by Busaman can immo off this ecu
RegardsIMDB:


Hello Pierre Theron thanks for your advice but I tried various files taken from this site is good but not even a
my car is a Clio II 8v 1200cc and here is nothing ... I tried to look for the post of Busan but I can not find .. you give me the link? must be (siemens sirius 32N) that is different from sirius 32 ok? I would file a virgin or no queues

[mariooo]

Hi
Do a search on 29f200 immo off on this site.
A file posted by Busaman can immo off this ecu
RegardsIMDB:


hello, thanks for your advice but I found a person who has the files I need virgin but I sell it to 150.00 euros in this case the forum does not help, unfortunately I was! Erim buy it you know someone who can help me quickly?

[albertros]

Hi,
this works no messing.
cut pin 58 before refitting ecu.
Now you are certain this works if it does not it means there is something else wrong
clio x reg 1.2 8v

[mariooo]

Hi,
this works no messing.
cut pin 58 before refitting ecu.
Now you are certain this works if it does not it means there is something else wrong
clio x reg 1.2 8v

Ok thanks I try adherent and let you know .. but in the wiring pin 58 is not so what should I do?

[albertros]

Hi,
2 possibilities come to mind,

1) you have looked in the wrong place for pin 58, are you looking from the correct side of the plug? They are marked with pin numbers. ( if you get it wrong and pin 58 is still connected it should still work if there are no other faults on the car )

2) Someone else has already been messing. If 58 is blank then, the ecu can not activate its immobiliser system, so it should be ok.

If there is a fault with the ecu programming the car would probably crank.

If this does not work.
Program the ecu, fit to the car and report exactly what is happening, so what is the led doing? does the car crank? does the remote central locking work ( indicating you have the correct key )?

[carbyvw]

hi
this car probably dont have immo line on pin 58.
immo is conected via can,if you dont have wire on pin 58
you you cant do it immo off
regards

[richy_rich]

I don't think your dump is right. Before taking the dump you need to power the sirius 32 up on the bench (or in the car with the immo line 58 cut)

Take a look at this, specifically pages 9 and 23.

Bear in mind that it also says "ECUs, that cannot operate without immobilizer code stored in memory: ... all of SIRIUS32 except for KANGOO 1.4l 16V ... It means that after decoding procedure on one of those ECU is done, you must to have immobilizer system properly operating (matching key), to make the engine start. Immobilizer signal emulator can also be used."

[mariooo]

Hi,
2 possibilities come to mind,

1) you have looked in the wrong place for pin 58, are you looking from the correct side of the plug? They are marked with pin numbers. ( if you get it wrong and pin 58 is still connected it should still work if there are no other faults on the car )

2) Someone else has already been messing. If 58 is blank then, the ecu can not activate its immobiliser system, so it should be ok.

If there is a fault with the ecu programming the car would probably crank.

If this does not work.
Program the ecu, fit to the car and report exactly what is happening, so what is the led doing? does the car crank? does the remote central locking work ( indicating you have the correct key )?



OK OK Albertos through the machine with your file works part ...

problems

1 remains fixed the red LED
2 does not count laps
3 does not work the water temperature
4 does not take the slightest error and from the throttle body and battery voltage (the battery is new) the diagnosis is made with TEXA AXONE
5, the car starts after I turn the key for the second time

What should I do?

[albertros]

HI,
solve the led last.

The rest of the faults point to a faulty ecu.
Have you soldered back the chip correctly?

[mariooo]

HI,
solve the led last.

The rest of the faults point to a faulty ecu.
Have you soldered back the chip correctly?

It was already bad this ECU the car was bad because it is playing with boster (battery) I found a track skipped and I repaired the unit but I think he took a blow .. Tomorrow I take a used one and redo the programming 29f200 with your files ..

This chip is soldered well I checked and good welds redone .. Tomorrow, I have a siemens 32N used .. doing so it should all work?Ascolta
Trascrizione fonetica

[mariooo]

It was already bad this ECU the car was bad because it is playing with boster (battery) I found a track skipped and I repaired the unit but I think he took a blow .. Tomorrow I take a used one and redo the programming 29f200 with your files ..

This chip is soldered well I checked and good welds redone .. Tomorrow, I have a siemens 32N used .. doing so it should all work?Ascolta
Trascrizione fonetica

still nothing to do - I checked the file off of real estate Albertos Dacia 1400 cc but mine is a 1200cc 8v clio the problem may be going wrong and does not take the minimum?
does not count laps and water temperature

[albertros]

Hi,
you are jumping all over the place. Do each job proprly then it can be eliminated.

1) get a known good ecu
2) load the file in the flash chip.
2) cut pin 58 on car - refit to car

car should start. If not

Check all the fuses and relays at the bmt unit, are they pushed all the way in as they often get kicked out of place by the passengers feet.

Get a wiring diagram ( search this site )

Check the supply wires, check all the engine earths, try a jump lead from the ground to the engine block.

Now follow one train of thought at a time and solve that problem, did you cut pin 58? If it is not there you need to know why. get a wiring diagram and trace it back to the bmt unit under the dash. Has someone been messing?

Is there a crank signal? if not find out why. Scope the wire, is there a signal at the ecu plug. If not find out why.

[mariooo]

Hi,
you are jumping all over the place. Do each job proprly then it can be eliminated.

1) get a known good ecu
2) load the file in the flash chip.
2) cut pin 58 on car - refit to car

car should start. If not

Check all the fuses and relays at the bmt unit, are they pushed all the way in as they often get kicked out of place by the passengers feet.

Get a wiring diagram ( search this site )

Check the supply wires, check all the engine earths, try a jump lead from the ground to the engine block.

Now follow one train of thought at a time and solve that problem, did you cut pin 58? If it is not there you need to know why. get a wiring diagram and trace it back to the bmt unit under the dash. Has someone been messing?

Is there a crank signal? if not find out why. Scope the wire, is there a signal at the ecu plug. If not find out why.


Hello Albertos ..

The machine with your part file and is fine ok

problems are engine tachometer

alarm indicator lit

water temperature does not work

Afternoon I try to touch the interior of the central unit fuses and see what happens

The wire harness 58 is not present in this

[mariooo]

Hello Albertos ..

The machine with your part file and is fine ok

problems are engine tachometer

alarm indicator lit

water temperature does not work

Afternoon I try to touch the interior of the central unit fuses and see what happens

The wire harness 58 is not present in this


some of you have some other files for Clio 12 8v? I servirebeb scodifica with partial or total .. with this file I uploaded is not working tachometer and water temperature .. can someone help me? I would try another file .. I do not know what to do I checked everything in the car is fine but tachometer and water temperature do not work ...

[melcool]

i is "normal to" not work tacho and temperature sensor!
See here ...it's from a immo-off program:

Tagliare il pin 58. Staccare il pacco code,nel caso il motorino di avviamento non funzioni: individuare nella scatola porta fusibili il rel? sotto al quale arrivano 2 fili di colore bianco molto spessi. ponticellare i due fili per far attaccare il motorino. Il sensore della temperatura e il contagiri potrebbero non funzionare.

Eng:
Cut the pin 58. Remove the package code, if the starter does not work: to identify the relay in the fuse box under the two wires which come in white very thick. bridging the two wires to attach the scooter. The temperature sensor and the tachometer may not work.

[mmoneim]

this is tested off bn file you should make the car work and temp immo led still and maybe the R.P.M dosent work they work throw can line
pass in pm

[panter21p]

this is tested off bn file you should make the car work and temp immo led still and maybe the R.P.M dosent work they work throw can line
pass in pm
i ned pass please

[Billyone971]

je voudrai avoir la cartographie S.V.P

[Johnner]

Hi Billy...welcome to Kaos

Could you please introduce yourself here : Introduce Yourself (http://www.digital-kaos.co.uk/forums/forumdisplay.php/2-Introduce-Yourself)

And please post in English...