PDA

View Full Version : immo off ms41 328i bmw


r-parts
6th October, 2010, 03:15 PM
hello, can someone immo off this one?

bmw 328i dme ms41 ecu
siemens 5WK9 032 D13
1 429 373
here's the file from flash:

34121


thanks in advance.
r-parts
9th October, 2010, 12:26 AM
i found a file on the board but, it's pass protect.
If anybody has this file it would be very handy
vanos batam
9th October, 2010, 03:22 AM
hello, can someone immo off this one?

bmw 328i dme ms41 ecu
siemens 5WK9 032 D13
1 429 373
here's the file from flash:

34121


thanks in advance.
hi..
maybe can help..
iv_laz
3rd December, 2010, 02:02 PM
hi..
maybe can help..
Pass please.
jarecki55
13th May, 2011, 05:26 PM
Hi can somebody help me, me friend build some HotRoad and like to use BMW engine. I need immo off dump from 5WK9 032 D13 MS41.0 1 429 373 or password.
thanks
lupu_sandu
13th May, 2011, 05:41 PM
Hi can somebody help me, me friend build some HotRoad and like to use BMW engine. I need immo off dump from 5WK9 032 D13 MS41.0 1 429 373 or password.
thanks
Your file off:
jarecki55
9th June, 2011, 04:41 PM
lupu_sandu dump no work :(
lupu_sandu
9th June, 2011, 04:48 PM
Dump is OK and solution is tested.
You have another problem with car.
jarecki55
12th June, 2011, 07:53 PM
Maybe I take some mistake, ECU was checked on working car and car don't crank.
I put dump on 29F200, my programmer is VP-290.
On ori dump fuel pump start but no spark after put immoff no fuel pump no spark.
ps. Engine working ok after put immo set from BMW.
pleas help
cjawahir
12th June, 2011, 08:01 PM
Maybe I take some mistake, ECU was checked on working car and car don't crank.
I put dump on 29F200, my programmer is VP-290.
On ori dump fuel pump start but no spark after put immoff no fuel pump no spark.
ps. Engine working ok after put immo set from BMW.
pleas help

its immo off , car will not crank .

you have to join starter wires .

cj
oep
12th June, 2011, 09:56 PM
jarecki55, your programer does not support this ic.
As for cranking part as cjawahir said, only needed if you removed ews from car.
As for solution, its working dont worry 'bout it..

aiight 4:0 ? :)
jarecki55
13th June, 2011, 08:42 AM
Sorry for my English m8's:
-car starter working-no EWS(this is Hot Road project)
-when starter go fuel pump don't work and no spark
-same problem after put in original BMW after disconnect EWS and short starter

my programmer VP-280 ( sorry no 290) not support 28F200
I have half year and working OK on 29F200,29F400, 29F800 on Special adapter:
Adapter SOP44 do programatora VP280 Wellon Weilei (http://www.gotronik.pl/programatory/vp280_sop44.html)

programming and verify 29F200 go OK

problem is on swap 28F200 to 29F200? this must be programmed original 28F200?
any idea?