BMW DME MSD 81.2 pinout

[trigital]

Hi,
I need the pinout for DME MSD81.2 from a E88 118i Cabrio.

After ECU repair I have the fault codes:

Injectors1-4 can not initialise or DME fault
Acc pedal power voltage stage1
Oxigen sensor DME fault

[cammy25]

HAd this once on a MSD80 .
Because both injector lines are connected to DME, it initialise at _Bootcheck. The problem in my ECU was the FET direct to output injector.

[trigital]

Because this use a OneChip Solution, the _bootcheck is not so accurate!

I change the Infineon from a crashed ECU to this SH one and maybe the soldering that initialise the high voltage for Injector 1-4 is not OK.

I still need te pinout for this EC.

Thanks!

[cammy25]

You can find all in WDS m8