Mercedes Vito 2005 EZS

[gizmo666]

Hi, How i can do Mercedes Vito 2005 EZS with tachouniversal or 912tool (golden clone box)?
I like to know how i should connect wires on it...

Processor have 1L02M on to top if it helps..

[T72]

you have secured 908az60, you nead ETL to do this job safe

[autodiags20]

This you can do with upa usb safe too if you know security bytes.

[gizmo666]

yes i have upa but i need security bytes and wirings,

[mchalisn]

Here you go Security Bytes for 1L02M
A7-05-A6-58-A6-58-A6-55
file:///C:/DOCUME%7E1/Michalis/LOCALS%7E1/Temp/moz-screenshot.pngfile:///C:/DOCUME%7E1/Michalis/LOCALS%7E1/Temp/moz-screenshot-1.pngfile:///C:/DOCUME%7E1/Michalis/LOCALS%7E1/Temp/moz-screenshot-2.png

[mchalisn]

Wiring for AZ48/60 with upa

[gizmo666]

Thanks for your help! i try it but i cant read mcu, it shows only AD AD AD AD... maybe i need to lift some pins??

now i need little sleep;)

[autodiags20]

This mcu hc908az60a
if you read ad ad security bytes wrong

[gizmo666]

i think same too, Who can help me with security bytes for 1L02M for Vito ezs?

[milanoffracing]

i think same too, Who can help me with security bytes for 1L02M for Vito ezs?

Try with this mate: $76-$B5-$40-$00-$79-$BB-$40-$00=MC68HC908AZ48(1L02M)
$DF-$C8-$EA-$48-$EA-$48-$EA-$48=MC68HC908AZ48(1L02M)
$A7-$05-$A6-$58-$A6-$58-$A6-$55=MC68HC908AZ48(1L02M)

[tachonow]

Try with this mate: $76-$B5-$40-$00-$79-$BB-$40-$00=MC68HC908AZ48(1L02M)
$DF-$C8-$EA-$48-$EA-$48-$EA-$48=MC68HC908AZ48(1L02M)
$A7-$05-$A6-$58-$A6-$58-$A6-$55=MC68HC908AZ48(1L02M)
This sequences not work for Vito ezs . Maybe for other mcus.

[alimmo]

you have secured 908az60, you nead ETL to do this job safe


Could you tell me which programmer is the best and easiest to do this key module and others, as i have had a lot of feedback. recommending 1= Xprog M 2= ETL 3= UPA-USB , but not sure which exact programmer to get and which one will actually do these " IN-CIRCUIT ".

PS do any of the above come with actual car listings included in software or is it a freescale manual data edit etc.

Thanks in advance guys

[autodiags20]

DC-A6-E7-26-E7-26-E7-26 1LO2M WORK 100%

[tachonow]

DC-A6-E7-26-E7-26-E7-26 1LO2M WORK 100%
Sometimes yes , sometimes not...

[tachonow]

you have secured 908az60, you nead ETL to do this job safe


Could you tell me which programmer is the best and easiest to do this key module and others, as i have had a lot of feedback. recommending 1= Xprog M 2= ETL 3= UPA-USB , but not sure which exact programmer to get and which one will actually do these " IN-CIRCUIT ".

PS do any of the above come with actual car listings included in software or is it a freescale manual data edit etc.

Thanks in advance guys

Buy all.
Everyone have something different than others.

[alimmo]

Buy all.


Sorry ,but this isnt a very definitive answer "BUY ALL" do you know how many versions and different types there are for each, obviously not ! so please keep useless advice to yourself. also you missed the point about if these programmer software comes with car list or is it freescale editing etc.

[tachonow]

Buy all.


Sorry ,but this isnt a very definitive answer "BUY ALL" do you know how many versions and different types there are for each, obviously not ! so please keep useless advice to yourself. also you missed the point about if these programmer software comes with car list or is it freescale editing etc.
This tools are for advanced users. Be sure I keep for myself and for those who worth my useless advices.

[alimmo]

??? ........... Advanced user or do you mean "advanced Joker" sour grapes probably describes you best if going by previous posts is a tip. anyway keep your crappy advice im sure someone will be willing to share better knowledge.

[tachonow]

??? ........... Advanced user or do you mean "advanced Joker" sour grapes probably describes you best if going by previous posts is a tip. anyway keep your crappy advice im sure someone will be willing to share better knowledge.
Mate. I have all this tools and I know what Im talking about.
Anyway you are one of those whos crying and ask help in all posts here.
Maybe in future you will need my crappy advice, but from now on I will help only those who helps others.
This is to much already...
You can consider this dispute closed if you are a gentelmen.

[deffc0n]

When you have problem with UPA SB try only ETL 100% read and write and give you good SB for UPA.

[tachonow]

When you have problem with UPA SB try only ETL 100% read and write and give you good SB for UPA.
There are not manny users whos got all programmers thats why Ive told in the post above to our smart member to buy all of them.
Most universal programmers was designed to do the same job but everyone of them have something special which is unique and useful function.

[Artjom]

Mate. I have all this tools and I know what Im talking about.
Anyway you are one of those whos crying and ask help in all posts here.
Maybe in future you will need my crappy advice, but from now on I will help only those who helps others.
This is to much already...
You can consider this dispute closed if you are a gentelmen.


Hallo friend.

You seem to know a lot about the programmers.. the X-Prog you have, is it original.. is it worth buyin original or does the chinese one does his thing too ?

I ordered myself an UPA USB .. as here it is a must have..

Can you recomend the ETL programmers from china or just the original ones.. which ETL programmers makes sence buying... i am searching for some new tools to buy.. what can you recomend.. ?

thx

[tachonow]

Hallo friend.

You seem to know a lot about the programmers.. the X-Prog you have, is it original.. is it worth buyin original or does the chinese one does his thing too ?

I ordered myself an UPA USB .. as here it is a must have..

Can you recomend the ETL programmers from china or just the original ones.. which ETL programmers makes sence buying... i am searching for some new tools to buy.. what can you recomend.. ?

thx
My opinion is that Xprog clone is a shit because of war between TMT and chineese. TMT make all time updates wich have bombs in sw to damage the clones.
At his price upa is a perfect tool which can be completed with ETL programmers for secured mcus.

[Artjom]

My opinion is that Xprog clone is a shit because of war between TMT and chineese. TMT make all time updates wich have bombs in sw to damage the clones.
At his price upa is a perfect tool which can be completed with ETL programmers for secured mcus.

Are the chines ETL ok or they are also shit?

I dont know the ETL programmers too good .. if it is not difficult maybe you could write which ETL programmer for secured MCUS you would recomend ... or are necessary for work...

It is obwious that you can not have everything.. but there are always things that are realy worth the money..

thx

[tachonow]

Are the chines ETL ok or they are also shit?

I dont know the ETL programmers too good .. if it is not difficult maybe you could write which ETL programmer for secured MCUS you would recomend ... or are necessary for work...

It is obwious that you can not have everything.. but there are always things that are realy worth the money..

thx
ETL programmers worth all monney. Even you buy from ETL directly pcbs are made in China so dont worry all programmers work with original sw.
What can I say about what to buy? I dont know what are you doing. For secured mcus you need programmer for HC05, HC11, HC08, HC9S12 and then TMS and NEC programmers. Chineese are sellin on package .

[z786]

Buy all.


Sorry ,but this isnt a very definitive answer "BUY ALL" do you know how many versions and different types there are for each, obviously not ! so please keep useless advice to yourself. also you missed the point about if these programmer software comes with car list or is it freescale editing etc.


??? ........... Advanced user or do you mean "advanced Joker" sour grapes probably describes you best if going by previous posts is a tip. anyway keep your crappy advice im sure someone will be willing to share better knowledge.

Brother, take my advice on this one, if you and me and maybe many other members of this forum put our experience and years in this job, Tachonow wud still kick our ass

What he said was correct, there is no 1 tool that does it all, they all have there strengths and weaknesses, so if you want the best im afraid you wud hav to buy all of them

1 more thing, iv noticed when you do not get an answer you like you become aggressive, you dont pay attention to the answer given but decided to resort to personal attacks, on this forum, Tachonow helps alot of people (see his thanks count) so when you act like this no1 will help you

maybe if you decide to participate more in the forum you will be helped more, but until then mate, courtesy will take you a long way

im only pointing this out to you as you know you once did this with me, we dont spend time on here to be insulted, we arent payed anytjin to help

this wasnt a attack on you, jus showing you the way

Hav fun

[alimmo]

Mate. I have all this tools and I know what Im talking about.
Anyway you are one of those whos crying and ask help in all posts here.
Maybe in future you will need my crappy advice, but from now on I will help only those who helps others.
This is to much already...
You can consider this dispute closed if you are a gentelmen.


Yes mate i'm Gentleman enough to close the dispute and Gentleman enough to apologize if you feel offended, but surely simply saying buy them all isnt very helpfull without understanding which exact models and why ?

PS i can take Z786's word for the fact that you are a really experienced member, so i take back what i said.

I'm Really having problems in understanding which F*****G programmer to buy for the VITO 2004- EZS, too much conflicting advice on which one will work in-circuit or not and i have been after a solution for some while which may have caused me some frustration,but sorry to have a go at you.
Dont take it to heart.

[z786]

and the winner is:
x prog m :D

[exe123]

to make it short. only solution for vito ezs is via etl 908 programmer. you have to desolder it. not possible incircuit!

etl 908 is the only programmer that is able to bypass the security.

[Irgl]

Im use Digiprog work well for this EZS

[tachonow]

to make it short. only solution for vito ezs is via etl 908 programmer. you have to desolder it. not possible incircuit!

etl 908 is the only programmer that is able to bypass the security.
if you have security bits also upa work in circuit.

[exe123]

if you have security bits also upa work in circuit.

for some this will not work even with correct security bytes.

@irgl:

no digiprog cannot make this one. some they can do but not this one. they also say it in the manual that you have to send it in

[gizmo666]

problem solved, i made it with ETL so i dont need sec bytes...thanks to tachonow for all the help;)

[Irgl]

for some this will not work even with correct security bytes.

@irgl:

no digiprog cannot make this one. some they can do but not this one. they also say it in the manual that you have to send it in
I did too many EZS with digiprog mask 1L02M i dont know why not this one:hmmmm2:

[Irgl]

VITO EZS 36373

[exe123]

This is old manual. different versions of this EZS are existing. In the new manual they write that you have to send it in.

I tried this EZS with original Digiprog. It is not working.

[Irgl]

:hello:Everthing is possible OK

[alimmo]

I agree that the Digiprog can do this as i have witnessed it myself

[z786]

i third that, iv seen it done with digiprog 3

[alimmo]

OK sorry to question,but has anyone actually tried wiring up like this dp3 pic (above)and use the Tacho universal to see if it works, the pdf in the diga manual manual dont tell you to lift pins also the yellow link wire is not included in the instructions, could this be the reason why people cant read and write this with tacho universal.

I look forward to your replies guys

[z786]

i think you definitly have to lift the pin

[knok]

OK sorry to question,but has anyone actually tried wiring up like this dp3 pic (above)and use the Tacho universal to see if it works, the pdf in the diga manual manual dont tell you to lift pins also the yellow link wire is not included in the instructions, could this be the reason why people cant read and write this with tacho universal.

I look forward to your replies guys


this kind of maskset (1L02) do not work with all tools.
If I remember well , even UPA don?t write this one (only read it)

[tachonow]

this kind of maskset (1L02) do not work with all tools.
If I remember well , even UPA don?t write this one (only read it)
I agree. Just tried one yesterday.

[gizmo666]

upa can read and write this if you choose MC68HC908AZ60A/4 and know right security bytes...