Temic 24 439 954 Pinout?

[Twist]

did anyone know a pinout por this airbag unit ?

[grinovsky]

all the information about the car please

[Twist]

all the information about the car please

Opel corsa c year 2003. 1.7 engine Y17DT

[morfej]

Did you mean pinout as how to connect Hc08AZ32 which is inside ?

If yes, do it like that (colors for carprog):

[Twist]

Did you mean pinout as how to connect Hc08AZ32 which is inside ?

If yes, do it like that (colors for carprog):

no man but tnx, i mean a airbag unit pinout

[engvitinho]

did anyone know a pinout por this airbag unit ?
FOR YOU
ALL DATASHEET
REGARDS

[tomaszcz]

no man but tnx, i mean a airbag unit pinout

Hi. OUTPUT CONNECTOR 50 PIN
7 - GND
5 - IGNITION
30 - K-LINE

[Twist]

Hi. OUTPUT CONNECTOR 50 PIN
7 - GND
5 - IGNITION
30 - K-LINE


TNX!!!!!!!!!!!!!!!! man cheers!

[Twist]

I think that is not a pinout for Temic 24 439 954
that temic is from astra g i se now in a airbag reseter program. did someone have that pin out?


this is all numbers on the box Temic 24 439 954
sdm unit
327963935
7161 A5 AIRBAG

[tomaszcz]

I think that is not a pinout for Temic 24 439 954
that temic is from astra g i se now in a airbag reseter program. did someone have that pin out?


this is all numbers on the box Temic 24 439 954
sdm unit
327963935
7161 A5 AIRBAG

This is your ecu?
and how many pin in connector?

5 - Ignition - orange/black
7 - Gnd - orange/brown
30 - kline - orange/red

1 and 2 - Driver airbag
3 and 4 - Passenger airbag
6 - To dashboard
8 and 9 - Driver belt tightener
16 and 17 - Driver side airbag
18 and 19 - Passenger side airbag
20 and 21 - Driver side impact sensor
22 and 23 - Passenger side impact sensor
24 and 25 - Passenger belt tightener

I hope that helped.
Salute

[Twist]

This is your ecu?
and how many pin in connector?

yes that is ecu

i have a 36 pins

[tomaszcz]

yes that is ecu

i have a 36 pins

My description is to your Ecu 100% and check on the connector in car as it is written digits.count as a 2 pin plastic.
You have 50 pin in connector.

[Twist]

My description is to your Ecu 100% and check on the connector in car as it is written digits.count as a 2 pin plastic.
You have 50 pin in connector.

Tnx man I appreciate that, but that don't work. op com can't enter in the airbag ecu

[tomaszcz]

yes that is ecu

i have a 36 pins
Here you go,m8.

[Twist]

Here you go,m8.


tnx but that don't work i do that like you, tnx anyway

cheers!:bandit:

[knok]

tnx but that don't work i do that like you, tnx anyway

cheers!:bandit:
It works , but you don?t know why ... try to connect airbag pin 30 @ OP-COM interface pin 8

[knok]

see this :

[Twist]

It works , but you don?t know why ... try to connect airbag pin 30 @ OP-COM interface pin 8

ok man tnx i'll try that and post resaults.

[Twist]

It works , but you don?t know why ... try to connect airbag pin 30 @ OP-COM interface pin 8

not work man. :hmmmm2:

[Twist]

I do that on this way

[Twist]

It works , but you don?t know why ... try to connect airbag pin 30 @ OP-COM interface pin 8


It's ALIVEEEEEEEEEE!!!!! it is working tnx man
a stupid wire don't working :eek:


Tnx :champions:

[cosminell]

Can someone tell me please ... How can you erase crash data for this kind of module with opcom ?

[masteroto01]

I TESTED THE DEVICE IS CONNECTED PINS CORRECT THANKS

[masteroto01]

THİNK TOOL MASTER...

[masteroto01]

TEST OK .!!! KİNGG