Renault clio Lucas DCU3R 1.9d

[dottecu]

hi, i need removed immo to clio 1.9d whit ecu lucas,car have body computer,what need do?regard

[lupu_sandu]

Remove eeprom from ECU (25080)
If this don't work, read eeprom, modify with Reno Immo Repair and job done (cut line 20).

[immokill]

Post dump from ECU :flybye:here...

Regards

[lihaven77]

[QUOTE=dottecu;890781]hi, i need removed immo to clio 1.9d whit ecu lucas,car have body computer,what need do?regard
trys this dump and cut pin 20

[tomaszcz]

http://www.digital-kaos.co.uk/forums/f178/renault-kangoo-immo-off-61182/

[dottecu]

i read dump and mod whit immo killer or whit renault tool ,cut 20 pin,but car start for 2 second after stop

[immokill]

Immobilizer code is repeated twice ? at addresses 0002-0003
(inverted code at addresses 0004-0005) and 0082-0083 (inverted code at
addresses 0084-0085). Replace existing immobilizer code at both places
with 00 00 and inverted code with FF FF. Cut line 20 and start car/

Regards

[dottecu]

this is ori

[immokill]

Hello
Here you go.Cut wire on engine ECU connector PIN 20- //-
On some models you can set 25080 eeprom register write protected in programmer ,I use SEEPROG for that option.


Regards

[dottecu]

[QUOTE=dottecu;890781]hi, i need removed immo to clio 1.9d whit ecu lucas,car have body computer,what need do?regard
trys this dump and cut pin 20

i test this but not removed immo,only repair

[DECOCO]

use this dump its working 100%
cheers m8

[dottecu]

use this dump its working 100%
cheers m8
have test,start for 1 second after stop

[tomaszcz]

have test,start for 1 second after stop

Hi,You must write protect all area.

[kool_mi]

just remove the eeprom from ecu this works10000000000000000000000000000

[tomaszcz]

just remove the eeprom from ecu this works10000000000000000000000000000

If you take out the chip, will power steering?

[DECOCO]

try to take out the chip ,the dump its working 100%
the rest depends on you
all best m8

[mihai_vyt]

glow plugs will not be active if eeprom is removed.
write protect all sectors of 95080 and cut pin 20

[DECOCO]

glow plugs will not be active if eeprom is removed.
write protect all sectors of 95080 and cut pin 20this is obvious he didnt write protect all sectors ,you are right about that

[latino]

hi decoco what you mind "write protect all sectors " thank

[javilette]

try this ,read the txt

works ok.

[racin-snake]

what is the pass on rar ?
it will not open ?

[msgsos]

hi what s pass?

[trycktill]

what is the password on rar ?

[viorelcarl]

what is the password on rar

[myllenyum]

With Galep, under memory options-> action option select "Protect register" FF. This will write protect your memory. Tested and working.

[DottoreBL]

try this ,read the txt

works ok.

pass ? :smokin:

[autoperfect]

the pass pls

[alfainyeccion]

problemas con dcu3r necesito pass muchas gracias

[monitel_service]

the pass pls

[Meat-Head]

try this ,read the txt

works ok.

WHY OFFER SOMETHING, BUT NOT SHARE THE PASSWORD??, THAT SUCKS BEVIS

[pititec]

hi, can you show password....please.....

[stefan_pavle]

hi what s pass?

[albertros]

hi, can you show password....please.....

[aklak]

what is the pass on rar ?
it will not open ?
Javilette pls
escritario.rar
thx

[juan andres]

hello, somebody can help remove immo ecu dcu3r kangoo 95080 lucas?

[Meat-Head]

hello, somebody can help remove immo ecu dcu3r kangoo 95080 lucas?

juan andres (http://www.digital-kaos.co.uk/forums/members/100816-juan-andres/)
Newbie

http://www.digital-kaos.co.uk/forums/customavatars/avatar100816_1.gif (http://www.digital-kaos.co.uk/forums/members/100816-juan-andres/)

Join Date: Nov 2009
Posts: 8
Thanks: 2
Thanked 0 Times in 0 Posts
Downloads: 2
Uploads: 0

hi there, use the search botton.

[juan andres]

juan andres (http://www.digital-kaos.co.uk/forums/members/100816-juan-andres/)
Newbie

http://www.digital-kaos.co.uk/forums/customavatars/avatar100816_1.gif (http://www.digital-kaos.co.uk/forums/members/100816-juan-andres/)

Join Date: Nov 2009
Posts: 8
Thanks: 2
Thanked 0 Times in 0 Posts
Downloads: 2
Uploads: 0

hi there, use the search botton.

hello, did not understand your comment

[Meat-Head]

hello, did not understand your comment


use for search botton


http://www.digital-kaos.co.uk/forums/search.php (http://www.digital-kaos.co.uk/forums/search.php)

[juan andres]

solution. Original dump cartool skip it and write-protected, 100% proven, thanks to everyone who helped.

[elektor72]

1:PROGRAMM THIS IMMOFILE TO 25080 OR 95080
2:START CAR FOR 5S AND SWITCH TO OFF
3:SWITCH CAR FROM OFF TO ON AND WAIT 5S
4:START CAR

[losing.control]

solution. Original dump cartool skip it and write-protected, 100% proven, thanks to everyone who helped.


this solution works 100% for sure!thanks for helping

[peko]

nice post !

nobody test swap this ecu ? when original ecu is died.

thanks ;)

[3abas27]

1:PROGRAMM THIS IMMOFILE TO 25080 OR 95080
2:START CAR FOR 5S AND SWITCH TO OFF
3:SWITCH CAR FROM OFF TO ON AND WAIT 5S
4:START CAR
THIS SOLUTION WORKS ?

[sergei5005]

Yes . Remove the 25080 eprom and Go !!! Power steering failure.

[totalkey]

That why I like dk!!!, been outside with no coms on kangoo with no transponder, read this remove EEPROM solution and work like charm, good job


iPhone Tapatalk

[dadal]

and what about ecu replacement ? I dont have ori ecu and car , ori ecu is death,, found an used ecu,,
I need to also injector coding or not ?? ( after virgin or immo off )