DP3 News, NO MORE CAN BLOCKER!!!! w204 w212

[markony79]

YouTube - DiagProgIII - W204, W207, X204 , W212 , W197 - OBDII odometer programming - no more CAN BLOCKERS !

plus 30 days free full update!!!!

[javilette]

markony you thinks that it works 100% ok . i tell me that whith class S dont works ok.dp3 "Works" whitch class S one years ago but have ploblem. it is a new software but works ok??


sorry for my english

[markony79]

markony you thinks that it works 100% ok . i tell me that whith class S dont works ok.dp3 "Works" whitch class S one years ago but have ploblem. it is a new software but works ok??


sorry for my english

The S-klass is working old version
the new version is not work, must put in Can blocker

But this is NEW, we will see is it work
but it will be good staff

[nebojsapejcic]

Mr. Wang let's see you do this...

[Nabil1987]

Good luck Mr. wang

[javilette]

you try with S class old version???

[markony79]

you try with S class old version???

I do this S-klass 2 cars before 2009, it work good,
must put charger on batery

after 2009 s-klass, not change the km in ezs,
must use can blocker

[RMCtech]

Ok this is nice, but the question is: this tool is really flashing the nec ezs ? or is flashing dash to not sync Km with ezs.

Anyone tested the car with star diagnosis to check KM on ezs ?

[T72]

Ok this is nice, but the question is: this tool is really flashing the nec ezs ? or is flashing dash to not sync Km with ezs.

Anyone tested the car with the star diagnosis to check KM on ezs ?
flashing can getway! and after SW update in MB dealer old milage jumping back.... not good, but can blocers not good too, becouse they have no reliability, and I have here that half MB cars have stoped work this winter, due can blocers defects....

[roth18]

flashing can getway! and after SW update in MB dealer old milage jumping back.... not good, but can blocers not good too, becouse they have no reliability, and I have here that half MB cars have stoped work this winter, due can blocers defects....

So that new update is essentially a software CAN blocker for EZS <--> Gateway. Update at the dealer and the blocker is gone.

[markony79]

I think the Elprosys do like this

the Dp3 make EZS like new one with 0km with flashing and later
automaticly program adress for key,and make adaptation for the same car
and it work!!!

this can see in proces when working

im monday I will get info from Elprosys

[z786]

just out of curiosity

is mr wang from ecutools?

[obdmaster]

just out of curiosity

is mr wang from ecutools?

Mr wang is ecutools, sinosells m8

[TULGEYWOODMAN]

YouTube - DiagProgIII - W204, W207, X204 , W212 , W197 - OBDII odometer programming - no more CAN BLOCKERS ! (http://www.youtube.com/watch?v=O027c04XcSc)

plus 30 days free full update!!!!

what is this 30 day free update then?

[T72]

what is this 30 day free update then?
not for us mate, its for new customers when buying new device

[z786]

Mr wang is ecutools, sinosells m8

so how wud he release an update for this?
doesnt make sense

[smartymarti]

When's it out to get in your machine , I have a amg cl to do ,
Do we need to have it above 12v or do we do it with engine switched on as per instructions

[markony79]

When's it out to het in your machine , I have a amg cl to do ,
Do we need to have it above 12v or do we do it with engine switched on as per instructions

Yes, the good questions? 12v minimum!!!!
like Volvo after 2008 ,you can make adjustment when is engine work,
No problem, I was do on volvo

I think the Mecerdes can do also like they said
but we will know better when buy update for this thing,
but know I am intereseted about price????
now dont need use can blocker, its about 100e for 1 car spend the money

[TULGEYWOODMAN]

not for us mate, its for new customers when buying new device

you mean if you buy a box you get free 30 day updates?
Where does it advertise this?

[smartymarti]

Old boy it's on the elprosys.org site

[xtwillox]

obd master I'm with you 100%

[r-parts]

the soft is working fine, did some w204's, w221's and 2 w212's with it.
w221 put extra powersupply on the battery, it took about 30 minutes.
w204 and w212 start engine and let it runt trough the process.
took 10 minutes.

after ezs and dash, do assyst manually and erase errors, done.


what are the simptoms when a can blocker goes dead?
i had a guy on the phone this evening with a 204.
he said his car won't start and the lighting of the dash won't come on.
i guess his blocker went dead but i ain't sure.
a quick look isn't so quick in this situation because the guy is from another country.

[megaexplosionman]

Yes, the good questions? 12v minimum!!!!
like Volvo after 2008 ,you can make adjustment when is engine work,
No problem, I was do on volvo

I think the Mecerdes can do also like they said
but we will know better when buy update for this thing,
but know I am intereseted about price????
now dont need use can blocker, its about 100e for 1 car spend the money

hi mate

Do you know if its possible to make peugeot bsi with OBD engine start so i dont need to put power supply ?

[sparkz02]

NO! i dont think its a good idea, because the BSI is where all the commands run through, and when you do BSI the wipers, lights does its own thing, Also in general i never use external power, only if i see the battery is running flat,

Also some cars don't take to long, done 207 (10mins) and others.

[r-parts]

i know it's not possible, you can try but in 5 tries it won't work.
when you start engine and try to connect to bsi with dp3 it reads brand and numbers but no milaege until the egnition is switched off and on.

if the battery is ok, i pull the fuse from the rain and light sensor.
That way the wipers and lights won't come on, thas more then enough power saving to do a 307 for instance.

after programming is complete put in the fuse.
then erase service history and dct's.

[markony79]

Last update Dp3
Opel cars on OBD now!!!

News | DiagProg III (http://www.diagprog.org/updates/)

[z786]

smelecom has been doin these opels via obd for over 9 months

[nebojsapejcic]

Anyone knows what is this new update for? Under fiat Engine ecu memory 'IAW.4AF-4SF via OBD2'

[nebojsapejcic]

It's for Brasilian customers only:hmmmm:

[markony79]

Warning!!!!
Last week I was be in company in Elprosys.....
becouse nobody answer last 3 mounths!!!!!

I think they will close soon !!!!!!
no more coffe on table......

be carefly with this firma
I dont belive them anymore

[r-parts]

that would be nasty if that would happen.

does the w212 e-klass work for 2010 model? anyone knows from experience?

[markony79]

that would be nasty if that would happen.

does the w212 e-klass work for 2010 model? anyone knows from experience?

Yes,its work, '
if you think on Ezs with OBD

[bkenigma]

Yes,its work, '
if you think on Ezs with OBD

But does this really work? I've heard from multiple people that its just a ZGW hack and if customer brings car in for service that they will see ezs fw dosent match and update it. Once updated, the correct mileage will return to the dash. Is anyone familiar with this?
bkenigma

[r-parts]

yes, by obd, i hearded the newer s-klass won't work when it's 2010 and newer.

i have 2 e-class 2009 and 2010 to do but its a 100km drive to the cars.
thats why i would like to be sure that years e-klass are working on all modules by obd.

[smartymarti]

iv done 2010 cl63 and had no problems customer has been in for warranty work all ok

[sparkz02]

I done an e class 2010, was all fine also,

Question for the pros,

I turned up to a car about a month ago w204, i got software version unknown, know this was a month ago, i wrote the cars software number down, any chance of finding out if dp3 have added this software number to the list?

[r-parts]

Ok, i've done a w207 eklass coupe march.2011 just minutes ago, no problem.
cluster has SW29

about changes in dp3 sw is hard to say, i do notice they make changes on their downloadserver once in a coupleof days.
i assume they add sw versions when they do that.
i hook on every couple of days to update my machine just in case it goes like i suspect.

[bkenigma]

The question still remains, does anyone have SDS and check ezs? I believe the issue was a checksum one and MB dealers were now updating the FW on the ezs module and then showing older mileage? I would like to know as ive heard this from many people and if incorrect I would buy the dp3 and mb package just to not have to use can filters anymore with my enigma. However, even dp3 still sells them on the site so Im not sure thats saying too much for the sw.

bkenigma

[markony79]

Warning!!!!
Last week I was be in company in Elprosys.....
becouse nobody answer last 3 mounths!!!!!

I think they will close soon !!!!!!
no more coffe on table......

be carefly with this firma
I dont belive them anymore

the REPLY on my own post is becouse----dont send me private message about this!!!!

the Clone machine is made from worker in the Elprosys...!!!!
with double SR NR!!!!

we will see what hapends next week

[smartymarti]

I would buy the dp3 and mb package just to not have to use can filters anymore with my enigma. However, even dp3 still sells them on the site so Im not sure thats saying too much for the sw.

bthere mainly still sold as not everyone has the mb update and furthermore there still very activly used in Renault dashes so abs unit didn't need to be removed

[trigital]

I check myself on a w221, with a simple software update for CGW. The old mileage come back.

The modified CGW with DP3 has a current DTC.

Maybe if anybody post the flash file of CGW after software can blocker, DK members will help for better solution.

[bkenigma]

See I knew it was complete BS, lol. I feel bad for all the poor customers who get there car done and goto return or in for service and boom there miles come back. I know here in the states you wouldnt be leaving with your car and prob. face criminal charges so its pretty serious for them to be screwing around with sw like that.

bkenigma---

[smartymarti]

So I imagine you being at the top of your game you'll present us with a solution bkenigma,

[z786]

the REPLY on my own post is becouse----dont send me private message about this!!!!

the Clone machine is made from worker in the Elprosys...!!!!
with double SR NR!!!!

we will see what hapends next week

DP3 has been cloned?

[smartymarti]

To be honest I think it's bollocks but as my friend says we will wait to next week something tells me nothing will change and business as usual

[tachonow]

As some smart guys from Elprosys left the Company and made the Enigma tool also now another team started to made DP3 with cloned serials.
I was contacted by phone from Elprosys to give them my personal dates and serial from my tool... Looks strange. They told me that, this is for renew database.
Dp3 cant be cloned only from those who made it.

[smartymarti]

Everything can be cloned , however look what happened when they did dashcoder,,,,, it was put shite and never even tool off anyone bought it just screwed cars up so I don't see anything to be concerned about

[TULGEYWOODMAN]

The question still remains, does anyone have SDS and check ezs? I believe the issue was a checksum one and MB dealers were now updating the FW on the ezs module and then showing older mileage? I would like to know as ive heard this from many people and if incorrect I would buy the dp3 and mb package just to not have to use can filters anymore with my enigma. However, even dp3 still sells them on the site so Im not sure thats saying too much for the sw.

bkenigma

thats saying they still have 2 million in stock, they sell them to people without the obd update and even without dp3!

I do 2011 s klass e klass and c klass every week all back to merc dealer, no problems, all checked with star, no problems

[TULGEYWOODMAN]

As some smart guys from Elprosys left the Company and made the Enigma tool also now another team started to made DP3 with cloned serials.
I was contacted by phone from Elprosys to give them my personal dates and serial from my tool... Looks strange. They told me that, this is for renew database.
Dp3 cant be cloned only from those who made it.

who contacted you from elprosys?..Matthew?

[TULGEYWOODMAN]

But does this really work? I've heard from multiple people that its just a ZGW hack and if customer brings car in for service that they will see ezs fw dosent match and update it. Once updated, the correct mileage will return to the dash. Is anyone familiar with this?
bkenigma

and why would they update it?

[TULGEYWOODMAN]

I done an e class 2010, was all fine also,

Question for the pros,

I turned up to a car about a month ago w204, i got software version unknown, know this was a month ago, i wrote the cars software number down, any chance of finding out if dp3 have added this software number to the list?

if doing a car that wont go....software unknown message, assuming its not because of poor voltage etc, then you should send the file to enigma , elprosys or whoever the box is, so they can add it on.

[TULGEYWOODMAN]

Warning!!!!
Last week I was be in company in Elprosys.....
becouse nobody answer last 3 mounths!!!!!

I think they will close soon !!!!!!
no more coffe on table......

be carefly with this firma
I dont belive them anymore

you where in Poland at Elprosys last week?
What reason do you give for making statement that you think they will close soon?

Or are you making mischief?

Similarly, last year....Enigma closing etc ha ha ha..

please enlighten me.!

[smartymarti]

Same old rumor mill winding up I'd say

[TULGEYWOODMAN]

Same old rumor mill winding up I'd say

you said it !

[tachonow]

who contacted you from elprosys?..Matthew?
No. I know well Mathew and Andrjez.
It was a woman. She didnt introduced herself. I thought it was Anna.

[bkenigma]

thats saying they still have 2 million in stock, they sell them to people without the obd update and even without dp3!

I do 2011 s klass e klass and c klass every week all back to merc dealer, no problems, all checked with star, no problems

Dunno I know of a few people who said it leaves some kind of error and when read by star that dealer usually updates it and old mileage returns. I know someone who has both dp3 and enigma and just brought the car to the dealer and they wound up replacing the central gateway and ezs cause they had no idea what the hell was going on. Once they replaced old mileage came right back.
bkenigma

[bkenigma]

Same old rumor mill winding up I'd say

No rumor mill.. If you see what I originally posted I would like to buy dp3 just for mb package, just wanted some first hand knowledge from people who have it if they've experienced this issue. From this thread it seems like a 50/50 on people saying yes its good and no its not. I tend to beleive you and tiger as you guys are very smart and know what your talking about so it kills me as i just cannot come up with a solid decision when half the people say yes and half say no, lol.

bkenigma

[sparkz02]

To be honest, it seems the people that have the software and use it weekly, says its fine, the people who don't have the software... are making excuses not to buy the software.

[TULGEYWOODMAN]

To be honest, it seems the people that have the software and use it weekly, says its fine, the people who don't have the software... are making excuses not to buy the software.

exactly.
those who dont have it along with developer talk thro there arse

[smartymarti]

Dear rumor mill i did a 60 plate e class on sunday obd with no problems errors or anyother bullshit non users have to say it took just over 9minutes charged the man ?350 which paid for little fish to eat my feet and hands , Please do call again

[r-parts]

this week, 3x w207 march-May-2011 cars
1x w204 63amg sep-2010
1x w221 12-2008

350eur a piece and people where glad to pay for don't having a can blocker.

cars: NOT A PROBLEM, no mill light, check ezs ok with star.
Wallet: NOT A PROBLEM

Sw work ok on dp3

[trigital]

this week, 3x w207 march-May-2011 cars
1x w204 63amg sep-2010
1x w221 12-2008

350eur a piece and people where glad to pay for don't having a can blocker.

cars: NOT A PROBLEM, no mill light, check ezs ok with star.
Wallet: NOT A PROBLEM

Sw work ok on dp3

And if the new customer know about the hack, pay for CGW reprograming and refuze to buy the car :party :with old mileage back, I think you must charge again and again...

This become a good business again!

P.S Who will share this hack, from ZGW flash?

[TULGEYWOODMAN]

And if the new customer know about the hack, pay for CGW reprograming and refuze to buy the car :party :with old mileage back, I think you must charge again and again...

This become a good business again!

P.S Who will share this hack, from ZGW flash?

who cares?

those who have dp3, do it, those who dont......stop going on about it!
Would you rather put can blocker in?

[Digamax]

this week, 3x w207 march-May-2011 cars
1x w204 63amg sep-2010
1x w221 12-2008

350eur a piece and people where glad to pay for don't having a can blocker.

cars: NOT A PROBLEM, no mill light, check ezs ok with star.
Wallet: NOT A PROBLEM

Sw work ok on dp3
Hi, do you use extra power suply or you programming car with run engine?

thanks in advance
Vladimir

[sparkz02]

engine running for c class n e class, s-class extra power.

[r-parts]

sparkz02 awnsered the question

[smartymarti]

S class and cl I never use extra power just start it with engine running , machine will ask for engine off ignition on then just let it run it's course

[labusas]

Hi, guys
don't want to hijack the thread, just a question what to watch out for or get right from the beginning if I decide to buy DP3 now?
Also is there a difference between FULL AND USA full, which I need?
Thanks

[markony79]

Hi, guys
don't want to hijack the thread, just a question what to watch out for or get right from the beginning if I decide to buy DP3 now?
Also is there a difference between FULL AND USA full, which I need?
Thanks

For USA cars better buy Jprog6!!!!

http://jprog6.com/

[labusas]

Thanks for advise. I looked at jprog6 but not sure about their benz & bmw capability.

[capi]

MERCEDES 204 it blocks ezs in 16000000km
Communication breaks with picture the picture
It shows this reading------then to repair it
It costs 1600 ? - this model breaks

[z786]

........say what?

[z786]

oh you mean the screen on speedo, not "picture"
what tool causes that?

[capi]

If in the dasch the numbers do not appear

[z786]

yes but which machine is causing this problem?

[smartymarti]

The question still remains, does anyone have SDS and check ezs? I believe the issue was a checksum one and MB dealers were now updating the FW on the ezs module and then showing older mileage? I would like to know as ive heard this from many people and if incorrect I would buy the dp3 and mb package just to not have to use can filters anymore with my enigma. However, even dp3 still sells them on the site so Im not sure thats saying too much for the sw.

bkenigma


as already previously posted elprosys still sell canblockers as there are still commonly used in renault megane and laguna so id say that still a good reason fo rthem to be on sale .:party :

[capi]

ye change por obd

[smartymarti]

Correct you do change by Obd once the abs unit has been done or a can blocker has been fitted

[motorsport]

mercedes commander make all by obd2 too

[autofan1965]

mercedes commander make all by obd2 too

From where You have this info?!

[z786]

any1 here done a ML using DP3 full OBD

[sparkz02]

any1 here done a ML using DP3 full OBD

I don't believe there is software for a merc ML full obd without the can blocker, there is software to do the dash obd, also if you wanted too you could flash the EZS.

[capi]

DP3 ok ML perfet 204 destroyed

[z786]

you done a ML? which menu?with CAN blocker?

[r-parts]

w164 ml done by clusterplug, went fine.
But only dash and assyst.
Assyst i use obd.
Dp3 has option to mod. flash in dash so it won't communicate with ezs anymore.

[z786]

ML is a 2010, how wud i go about it?

[Speedosoft]

You can reflash the ML instrument cluster either by cluster plug using D31 cable or via OBD2. The cluster will no longer take the old mileage from the EZS. The EZS will still show the old value if read by the DAS. For the EZS to show the same value as the one in the cluster a CAN filter is necessary.
I confirm that there is no software similar to the W204/W221 (reflash of the gateway) for the 164/251 chassis type MB vehicles.

[r-parts]

as i recall the ml was 2009

[diagtech]

I have done these by putting the dash to 1,000.000 kms then putting dash back in and then take dash back out and put to required mileage and flash,then do assyst properly if it goes in merc they think ezs is faulty replace it.

[sparkz02]

To be honest... it sounds like the man has a good plan!

Knowing my luck, I'd do that then I can't flash the dash for whatever reason and be stuck with 999999