TM-5402HD - How to patch and add C***m/N****md support

[ibz_123]

TM-5402HD - How to patch and add CCcam/Newcamd support
Find PDF how to guide attached & relevant patch & Add on.

Information from another forum.

[kevinoliver]

will this explane how to use with keys

[Manic01]

Read it and see.

[maravilloso1955]

Hi Everyone! I'm going crazy! need help with creating a CCcam.cfg file for the Openbox S9
Thank You

[squig007]

has this reciever an rf modulator ?

[Manic01]

Yes mate........

[billubakra]

:celticscarf:
Yes mate........
can someone explain how this works with TM5402

[rigsby71]

With the latest software / patches etc,
can the TM5402 HD READ a S#Y Ialalia card in it's reader.

Not looking to share it, just read it.

Many Thanks

[pulsaruk]

mu usb recognises the phantom but not the addon?

can anyone suggest anything



sorted there was no .stb at the end

happy days







With the latest software / patches etc,
can the TM5402 HD READ a S#Y Ialalia card in it's reader.

Not looking to share it, just read it.

Many Thanks

[d12ydn]

hi could someone help me how to put codes in im lost when it comes on menu dont know where to go thanks

[thijs]

what codes are you talking about Biss and DCW Keys
(Manual insert) remote control code: 8280
just go to the first empty line and enter keys in here make sure you are on the channel that you have the keys for if there is no empty line use one of the last lines

[howy]

really struggling with this i have applied patch and add on i do not know what password to put in

[thijs]

the pin would be your own or if you did not change it yet it would be "0000" or if you can't remember try "2011"

[mariorossi1982171]

idz you are a legend been looking for ages on how to do this cheers mate

[mariorossi1982171]

why wont add on file show up on box

[thijs]

cause it's an addon.To confirm if you have it press "8281"
while watching a channel then put in your pin if you did not change this in your setting it's "0000" if you don't remember
try "2011"

[howy]

do i need to be connected to the internet and have a dns account or should evey thing just work in this experiment with the patch downloaded and applied from the usb please forgive my ignorance i am not very technical

[Marf]

Yes it's a great receiver adding lines is possible use text editor externally

[Maxbats]

Installed successfully here.

Easy guide. Thanks mate

[howy]

i am still struggling with this experiment i have applied patch and addon and reloaded channel list.do i need a dns account of my own or do i use example.dns do i need to connect to the internet for the patch to work or should it just work my email is ( no addys :rulez: )if anyone can explain please help and forgive my lack of intelligence

[k27779]

hi
which is better for it dynamic or static ip address?

thank you

[thijs]

depend on the router and broadband provider
some users say they get better results with static.
my tm's have been working fine for years with dynamic

[Nutsandbolts]

Hi. I am curious to know which add on file you are refering to. If you are referring to the softcam keys file you will find in your CAS menu where the keys are stored. If you are talking about the patch you will see the latest version in SYSTEM INFORMATION menu under s/w version. This applies to TM receivers.

[thijs]

we are talking about the addon file for c.s.
to get the secret menu "8281" to put in c/n lines
and latest softcams you would get here http://www.digital-kaos.co.uk/forums/f120/
and latest patches for any model you would get here http://download.for-better.biz/bbs/main.php
just click on the model/series you own and the latest patches for you will pop up

[Nutsandbolts]

Hi. Thanks for that info. I had the wrong end of the stick as they say.

[r1dave]

hi i just brought one of these. would these be the files i need ?

[ky1]

TM-5402HD - How to patch and add CCcam/Newcamd support
Find PDF how to guide attached & relevant patch & Add on.

Information from another forum.
Hi There I done every thing in guide say. but my TM-5402HD
server connection states say disconnected. is there anyway
make this work??

[Nutsandbolts]

Hi. can cccam etc be installed on aTM5400 SUPER and if so how do you go about it?. Regards.

[thijs]

i don't think it has the lanport does it ?
it would be sssp then with a sharing pack on the computer and null modem lead very outdated

[Nutsandbolts]

Hi. Thanks for the reply. Theres no lanport on my TM5400 but its got sssp somewhere in the menu but what it does i dont have a clue. Is this sssp any good for anything or is it just for show? Any advice much appreciated.

[kane92]

hi everyone i am totaly new to all this but can someone help please just got tm5402 and cant get clines in i put 8281 in on remote put cline in but it does not connect please can someone help

[rollzy]

Hi guys,total newbie here who has just purchased a technomate 5402 hd which is connected to existing sky dish.Have read what it seems like thousands of pages to try and learn how to set this box up and at the moment cant get secret menu up even though i.ve installed latest patch and add-on.Anything else ive got to install?Had to make this post so i can download the instructions from this guide which will hopefully help but any advice in the meantime would be greatly appreciated.Thanks.

[blueflash234]

Hi. Thanks for the reply. Theres no lanport on my TM5400 but its got sssp somewhere in the menu but what it does i dont have a clue. Is this sssp any good for anything or is it just for show? Any advice much appreciated.

sssp can be used with wsp and fausto using a serial rs232 cable and do it through the computer

[blueflash234]

Hi guys,total newbie here who has just purchased a technomate 5402 hd which is connected to existing sky dish.Have read what it seems like thousands of pages to try and learn how to set this box up and at the moment cant get secret menu up even though i.ve installed latest patch and add-on.Anything else ive got to install?Had to make this post so i can download the instructions from this guide which will hopefully help but any advice in the meantime would be greatly appreciated.Thanks.

your question has been answered already in this thread if you read it all, also this should be your 2nd post you should have introduced yourself first, welcome anyway you will get sorted with a bit of patience we will help if we can

[rollzy]

your question has been answered already in this thread if you read it all, also this should be your 2nd post you should have introduced yourself first, welcome anyway you will get sorted with a bit of patience we will help if we can

Yeah sorry i didn't introduce my self but my patience was wearing a bit thin by then through frustration!The guide i downloaded is just basically what i've done but when i press the number on the remote to get menu up it doesn't work.Don't know what to do next:giveup:

[thijs]

reload the addon http://download.for-better.biz/bbs/upload/feedback/3_ADDON_002p.stb and it's never too late to introduce yourself
and press 8281 while watching tv channels is what brings up server menu

[rollzy]

reload the addon http://download.for-better.biz/bbs/upload/feedback/3_ADDON_002p.stb and it's never too late to introduce yourself
and press 8281 while watching tv channels is what brings up server menu

Thanks for the quick reply and help.Done that earlier and just done it again to make sure but still nothing.Just to clarify that i put the latest firmware from the technomate website and put on the latest addon.Is there anything else i should put on?:stupido:

BTW,i've introduced myself,not really active on any forums and was not something i knew about.

[thijs]

you need to patch it m8 original firmware will not do it find it here
Download center (http://download.for-better.biz/bbs/reply.php?board=tm5402hd&num=1) you wer'nt following the guide to well patch it and put addon on and try again
patch loads the same as firmware

[rollzy]

you need to patch it m8 original firmware will not do it find it here
Download center (http://download.for-better.biz/bbs/reply.php?board=tm5402hd&num=1) you wer'nt following the guide to well patch it and put addon on and try again
patch loads the same as firmware


Thank you so much.:adore:Simple when you know how!!Quite daunting when you reading different things about it.What's next though?If you don't mind helping me out?Feel a bit of a pain asking all these questions but you helped me do this in five minutes when i've spent hours reading up on things that i didn't really need to.obviously looking for a server and i know to a certain extent that talk is not allowed,but i would be very grateful if you could point me in the right direction!:proud:

[Nutsandbolts]

Hi guys. Thanks for the reply regarding sssp on my tm5400 super. How does wsp and fausto work with my receiver? Also will i be able to use USB to USB serial cable? Regards.

[rollzy]

Thanks Again Thijs .Noticed you helped a lot of people in this thread.Top Man.

[Nutsandbolts]

Hi. yeah i agree with you..thijs is a top banana ... NUMERO UNO. Regards.

[libertyjack]

FIRST POST ...am trying to download file help on page 1 of this thread but it wont let me..do i need to post a set number of times before I am allowed as I am deperate to know how to input clines on my 6902hd using the remote control but so far am failig miserably.:giveup:.any help appreciated

[thijs]

start with introducing yourself in the introduce yourself section and as the title says this thread is about the 5402 not the 6902
start a new thread to ask your question that is answert in http://www.digital-kaos.co.uk/forums/f75/technomate-5420-cant-enter-c-lines-240286/#post1342891 and in many other posts before the method is the same for all nonlinux tm with lanport

[rupeshbmnoob]

Thanks for posting this!

I'm curious to see what it's like to set up the 5402HD box because I'm not sure whether to buy it or a Blade 7000.

[thijs]

nearly the same

[nasirahmed]

Hi All,
this is my first posting, I have tm-5402 HD, I was having a wonderfull time watching all the channels till last week when I was playing with the box and reset it to factory setting and have lost every thing, all get now are the free view channels, please help, I have no idea what to do.

HELP!:party:

[Manic01]

Sounds like you have a pre configured receiver, contact the seller first.

[lak2007]

Hi guys, first post. Got a TM5402HD hooked up to a SONY 3D Screen. Does TM5402HD support 3D channels? I know there is only one at the moBment, Sly3D, but it doesn't seem to work. I got it paired with a quad LNB and O2 B/B. Works good but I think the W/L Router is past its sell-by date. Might ring O2 n see if they replace it FOC.:proud::secruity:

[Manic01]

Best start own thread, but nearly all HD receivers are 3d compatible for the signal.
It's the TV thats needs to do the rest.

[Manic01]

Most of those keys are CW keys and will have expired.

[Barking]

Hi all, just bought the 5402, first step into HD.. any tips, helpful hints and advice anyone can give me for start up etc? Will have a motorised dish too.

[dick b]

try this guide

[Barking]

Thanks, will read with interest. Anywhere on the forum for the latest 'updates'?

[dick b]

Thanks, will read with interest. Anywhere on the forum for the latest 'updates'?
Download center (http://download.for-better.biz/bbs/main.php) plus latest softcams are usually posted in the technomate softcam section on this site.

[sutto1971]

hi to all
ive read all the stuff about using ccams on the tm 5402 ive installed all the software patch number 116 and the addon file
even added the cline to the box protocol is cccam active is on but the status is disconnected im i missing something else ? if i press the sat button while in the server list it uploads no problem at all

ive given up all hope now !!! please help !!


thanks in advance

[potrobber]

hi to all
ive read all the stuff about using ccams on the tm 5402 ive installed all the software patch number 116 and the addon file
even added the cline to the box protocol is cccam active is on but the status is disconnected im i missing something else ? if i press the sat button while in the server list it uploads no problem at all

ive given up all hope now !!! please help !!


thanks in advance

how did you add your line? and is the line active

are you pressing the red button to connect the line

after putting line details in correct places

[Manic01]

Either line is entered incorrectly ie upper/lower cae wrong or line is dead.

[sutto1971]

hi thanks for you help
ive put the cline details in using the remote ip key then change one of the connections set up already using the pdf file earlier in the post im going to buy a new line now just to check the details thanks again

[mjon]

when pressing the sat button while in the sever list all you are doing is sending a txt file to your usb pen or hard drive, edit this txt file on your pc with your c line then put this back in the techno

[sutto1971]

ive brought a new cline and still the same any ideas ??

[sutto1971]

ive brought a new cline and still the same any ideas ??

success at last thanks very much for you help im well happy now

[andymac999]

Just joined - hello - I've being using various satellite equipment for about 10 years (dargon, matrix etc) but am ignorant on CCCam. Is it worth downloading the patch if you don't want to put your hand in your pocket for additional services? Thanks in advance

[Manic01]

Unless you have a c/n line from somewhere then cccam wont do anything.
But the patch will open other channels ie bulsat irdeto channels on 39e.

[mouloud1975]

hi, i got a technomate 5402hd all was working fine,downloaded latest software from technomate and i cannot get access to cccam menu when i press ip.can any one pls help me to download to right software and add on?
many thanks

[thijs]

official firmware will not get you into servermenu just patch again with latest patch and things should be ok again from Download center (http://download.for-better.biz/bbs/reply.php?board=tm5402hd&num=9) if you loaded add on before it will still be in your tm

[madlooney]

Thanks for all your help here!!!

[Franco007]

hey everyone,
Hope you all well.

I recently got this tm5402, it was working absolutely fine till a few days ago, now it is freezing and gives the message "Scrambled channel" when I go to the server list, the protocol is NEWCAMD, active is ON and the Status is DISCONNECTED! when I press the red button nothing happens, What should I do to get the status back connected? any help will be much appreciated.

[Manic01]

Who ever your cs is from, is now off.

[twister32]

Hi, I got a tm5402hd box from some one with one year subscription I want to update the fw. But if I do that I am going to loose the cline info I mean servers details. And I donot have cline details. And do not know how to get these details from the box. When I press ip on the remote and go into cccam details I can only see Ffffffffff
Any help how to get c-line details off the box.

[thijs]

if you update firmware the c-line will remain
only if you reset the box in the loadermenu you will loose the c-lines(switch off at the rear turn back on while holding menu button this brings you into the loadermenu)
make sure to update firmware by
1)back up channel list(in datatransfer menu press green button this creates .cndf file on usb device)
2)factory reset
3)load original technomate firmware(can be got from Technomate software online (http://www.technomatesoftware.co.uk/index.php?dir=Official%20firmwares/))
4)factory reset
5)load latest patch (can be got from Technomate software online (http://www.technomatesoftware.co.uk/index.php?dir=TM5000%20series%20receivers/5402HD%20Series/))
5.1)(after this load latest addon if you did not do this before, after this 8281 will work)
6)factory reset
7)put back channellist(same as patch/firmware ok on cndf file>ok on normal) and rescan all channels in use
if you don't use this method in between patches you might get stuck with bugs/problems on your tm
cause old bits of patches/firmware may remain in your tm.
and it is very important to do factory resets ,in motorised setups make sure to take note of your longitude/latitude for USALS
and reload them before you rescan sats in use

[twister32]

thanks for quick and brief reply but the thing is i had tm500s befor and i updated the firmeware through the box and after update all pay for view channels was scrambled and i had to take it to the person i got it from to get it working and he charged me ?20 for that to get it working.
friend of mine have a tm5402 box and recently he just pressed on fectory reset and after that his all pay to view channels were scrambled and he had to take the box to suplier to get it working.
so that is the reason i am concerned. the box i got tm5402 does not have a card in and in 8281 i can see a cccam connected .
so i was thinking if there is a way i can save a cccam details and copy they over after patching?

[twister32]

if you update firmware the c-line will remain
only if you reset the box in the loadermenu you will loose the c-lines(switch off at the rear turn back on while holding menu button this brings you into the loadermenu)
make sure to update firmware by
1)back up channel list(in datatransfer menu press green button this creates .cndf file on usb device)
2)factory reset
3)load original technomate firmware(can be got from Technomate software online (http://www.technomatesoftware.co.uk/index.php?dir=Official%20firmwares/))
4)factory reset
5)load latest patch (can be got from Technomate software online (http://www.technomatesoftware.co.uk/index.php?dir=TM5000%20series%20receivers/5402HD%20Series/))
5.1)(after this load latest addon if you did not do this before, after this 8281 will work)
6)factory reset
7)put back channellist(same as patch/firmware ok on cndf file>ok on normal) and rescan all channels in use
if you don't use this method in between patches you might get stuck with bugs/problems on your tm
cause old bits of patches/firmware may remain in your tm.
and it is very important to do factory resets ,in motorised setups make sure to take note of your longitude/latitude for USALS
and reload them before you rescan sats in use

i tried switching on tm5402hd from the back and holding menu button on remote because there is no menu button on reciever nothing heppen after this procedure any idea how to get loader menu on tm5402hd?

[thijs]

i tried switching on tm5402hd from the back and holding menu button on remote because there is no menu button on reciever nothing heppen after this procedure any idea how to get loader menu on tm5402hd?
if you go into the loader menu and do a fac.reset there you will loose your c-line then.
If you don't want to loose it only factory reset in the normal menu i was trying to tell you NOT to do factory reset in the loadermenu if you don't have the details.

[damiensk]

sorry if its been asked before. im new to the tm range,
have always been a stalwart dm person.

have tried conecting to dcc but it keeps saying login fail.
have changed the password to root from dreambox.
cant seem to see the c.line otherwise, i want to take it out and put a new one in.
but without going through dcc i dont know how?
i dont want to reflash the box and start again.
is there any other way i can view via dcc.
have managed to look at the box via internet browser and it says the user is root and pasword is root, but when i do this on dcc it does not connect.

sorry should have said its a tm 500 that i am trying to sort out.

[Manic01]

You need to change password in Technomate control centre first.
There is no password by default on a TM500
Also should start your own thread, as can get confusing on which model being discussed lol

[okanac]

Does this add CCcam 2.1.3? Thanks

[okanac]

Does this add CCcam 2.1.3? Thanks to a 5402HD

[thijs]

to a 5402HD
no...............

[walzy]

TM-5402HD - How to patch and add CCcam/Newcamd support
Find PDF how to guide attached & relevant patch & Add on.

Information from another forum.

how do i download these files up to date

[walzy]

how do i download

[Manic01]

Need to make a few posts first.

[edtheducky]

Hi im looking at buying the TM-5402 HD my hobby is feed hunting and is this a good receiver for doing it with

[nimlfc]

very helpful thank you

[daInfamous]

Excellent post...thanks

[oli66]

whats the best program or where to get free winzip etc to open these files do i need to open them first before i put them on usb

[devilboyz]

Hello all,

Yesterday, I bought Technomate tm5402. Help me for how to put camd or newcamd on the box?

[thijs]

same as cccam only under the newcamd protocol

[srp111]

just bought a 1m dish and motor and technomate 5402, got it up and running now, will have fun with patching etc....thanks to everyone on here, im learning loads.

[mdt]

just bought a 1m dish and motor and technomate 5402, got it up and running now, will have fun with patching etc....thanks to everyone on here, im learning loads.



BE CAREFULL when patching your box and double check the files as a wrong move can brick your shiny new toy, regards mdt

[badman56]

cant seem to download the files? keeps saying no privilege?

[Manic01]

More posts required.

[hahayha123]

help lol:bounce:

[Manic01]

Another leecher, ~~~~ing hell there everywhere.

[mrshine]

please help ive try all above but no joy ive put on usb but its not showing up on my tv patch ok addon ok please help

[Manic01]

Welcome to Digital Kaos.

[bubsy123]

thank you very much!

[Manic01]

And welcome to you as well.

[mark b]

Hi I can't get secret menu ,either by 8281 or ip button
Please advise
thank you

[Manic01]

Welcome to DigitalKaos.

[rigsby71]

Hi I can't get secret menu ,either by 8281 or ip button
Please advise
thank you

Do some reading about patching.

[nielsos002]

thank you for all the info its been helpful

[Mitseymoo]

Hello, everyone, noob here, your probably sick of hearing it lol. Anyway i've read the pdf file and done everything and patched it etc, then it says about entering some numbers, which i do, which takes me to the menu, looks like of channel settings, doesn't look english to me, what do i put here? i havent a clue sorry. or do i just do a blind scan?
thank you for reading this

[tempo123]

Hi all, just a quick question I have installed the addon file and everything is apparently working fine, what I would like to know is what kind of cccam am I using? I have been ask this question and I haven't got a clue where to look for this kind of information. Many thanks

[thijs]

Hi all, just a quick question I have installed the addon file and everything is apparently working fine, what I would like to know is what kind of cccam am I using? I have been ask this question and I haven't got a clue where to look for this kind of information. Many thanks
that would be cccam 2.0.11 and if they say to change it ,well you can't.
And 2.0.11 works perfect anyway with most servers,if it doesn't work for you it will be more then likely a bad server or you will have to stay/goto an older patch like 117 for some reason newer patches don't clear some providers very well.:rolleyes:

[tempo123]

Hi, I have another technical question please : what is an ECM time and how can I find on my TM5402 this? I have been asked this and really I haven't got a clue. I navigate all the TM menu but I can't find anything that looks close to this. Many thanks for your help

[thijs]

Hi, I have another technical question please : what is an ECM time and how can I find on my TM5402 this? I have been asked this and really I haven't got a clue. I navigate all the TM menu but I can't find anything that looks close to this. Many thanks for your help
you can't find it on your tm5402 non linux
ecm time is the speed of your cccam/newcamd connecting to the card of the server your connected to ,the quiker the less freezing/glitching so make sure to set your ecm pids
this is a bit the same as cccam.prio on linux
To get to your ecm pid's goto any $channel and press mute>exit>blue button
when you are in the ECM PID's menu it will be on auto in default but in c.s. the tm will request all ECM PID's in the list from server and this will bring up your ecm request time (long time for channel to clear and glitching /freezing)
so in the ecm pid's list of the channel if you pick the one that your server is using your tm will connect/clear this channel faster and it will be more stable (bring down your ecm request time) once you pick one you will have to save and move to a different channel and back to see if the ecm pid is working for you if not you will have to go back in the ecm pid menu and select one that is working with your server.
Sounds like a lot of work and yes it is but it makes a big difference for me with the channels that were clearing very slow and were freezing/glitching a lot.If you want to try this maybe start with a channel that is clearing badly for you and see if it makes a difference.
Some providers will have only one still pick that one to lower your ecm's,some providers will have loads so you will have to go trough the list to see wich one works best.
Don't forget to make regular channellist backups and the ecm pid's will be saved too !!!http://www.cs-kings.org/forum/images/smilies/wink.png

[tempo123]

Thank you very much for your detailed answear, much appreciate! Can you please give me an example of fast ECM or a low one? What is the minimum value number where you can have glitching/freezeing free picture?
For example if in one of my channels with only one pid available I have this:

(1) 1234 : N*S (123)
where 1234 is a 4 digit number and 123 is a 3 digit number

So is the ECM value in my case 123?
I hope it is ok to ask this kind of questions, if not please accept my apologies and I will try to delete the post. Many thanks in advance

[thijs]

Thank you very much for your detailed answear, much appreciate! Can you please give me an example of fast ECM or a low one? What is the minimum value number where you can have glitching/freezeing free picture?
For example if in one of my channels with only one pid available I have this:

(1) 1234 : N*S (123)
where 1234 is a 4 digit number and 123 is a 3 digit number

So is the ECM value in my case 123?
I hope it is ok to ask this kind of questions, if not please accept my apologies and I will try to delete the post. Many thanks in advance
these numbers have nothing to do with ecm times
these a ecmpids that will help your tm connect faster to the server if you put in the right one you will find this out by trial and error if you find the right one for the one provider then they will be the same for the rest of the channels of that provider.
As said before you can't see ecm time on the non linux tm's anywhere ,if you had a linux box you could see them and they would be different all the time and it would be an actual time
that it takes for your box to get the keys from the card that the server would use.

[tempo123]

Now I understand! thank you very much, I have another question if you don't mind: in a previous post you suggested to me to install an older patch ( 117 ) because more stable, can I please ask you if the older patch keep the TM stable for CS or it is just for the softcam/keys to clear channels like helsat 39e ? many thanks for your help understanding my box

[thijs]

It would be to keep cs more stable older patches work much better with cs then the newer ones.
Try some of the old patches here Technomate software online (http://www.technomatesoftware.co.uk/index.php?dir=TM5000%20series%20receivers/5402HD%20Series/) but you will loose the updates from newer patches to make utube work ect.

[tempo123]

Brilliant, thank you! I don't really care about youtube and things like that....I 'll do what you suggested straight away now!

[celticnthell]

Hi All

is 10e still open with biss keys? if so i have the latest patch from the forum and the latest keys but it not opening for using 11387 v 29999 on the tm-5402

patch120p

[cranmer13]

Hi to thijs! Could you explain how on older version of the software makes cs more stable? I am a newby to all this and had the techno for 1 week and been trying cs for the first time ever. Twice now the channel and whole box has frozen, in the first two days, after watching for some hours. Could this be to do with the software? As you know with these things.... there are so many variables and i was thinking it was more the box at fault.... or could it be the server? Before trying cs..... the box had been working perfect in general use for fta channels. I installed the latest phantom, p124, but you're saying 117 would be better?

[cranmer13]

Sorry.... I should have seen the other thread.... locking up!

Thanks.

[t1mrv1]

Thank you for all the info very useful!

[junaid684]

Thanks. Hope its as straight forward as it seems.

[imranuk]

hi thanks for all information guys

[arsenalist]

thanks....

[nagueswar]

bought the tm5402 box waiting for delivery hope i can mange to configure the box qith your help files here. the box cost me 125?.

[Acieee]

This is perfect for newbies

[lfc4ian]

hello all
i have just ordered one it should come on thursday
im just geting the files together
is this all i need to patch a TM-5402HD and to add CCcam to it ?
Guide.pdf

patch 1st
Phantompatch-TM5402HDCI_ALL_127p_27-12-2012 (the new one)

patch 2nd
ADDON_002p

thank for your time
ian

[satlad]

yes that should be all you need its been some time since i set one of these boxes up but found it very easy i added the cline with remote no problem at all

[kilo222]

TM-5402HD - How to patch and add CCcam/Newcamd support
Find PDF how to guide attached & relevant patch & Add on.

Information from another forum.
help needed i keep getting incomplete file. technomate tm-5402 (patch add on)

[vicsam35]

I'm completely new to the satellite fraternity, can anyone point me in the right direction?

Is there a guide/explanation/instructions on the following:- 'Phantom Patch', 'Addon', 'Softcam keys'.

Cheers

[andy1494]

on the 5402 if i do a factory reset do i get all the sat and channels that was first on it when i bought it thanks

[baroni701]

I just got my mates tm5402 and he was using it for PLTV. So I downloaded patch and add-on put it c-line but it just says disconnected. The ID I assume is user ID and dchp is on - any ideas?

[systemseiko]

On your remote bottom left you have a button IP, press this and input default password 0000.
This takes you into Addon screen or active C lion, ensure connection is switched to ON, this can be activated by scrolling over to connection status and pressing OK to switch between on and off.
Remember to reboot box

[cramcomp]

first day looking at this box or an box for that. got a tm5402 today to try just updated via usb ok but 8281 does nothing to go any further any ideas anybody ?

the ip button is bottom right not left have 1 the correct remote ?

[digicon]

first day looking at this box or an box for that. got a tm5402 today to try just updated via usb ok but 8281 does nothing to go any further any ideas anybody ?

the ip button is bottom right not left have 1 the correct remote ?


You also need to load the ADDON firmware patch as well as the main patch for the 8281 to function

[cramcomp]

You also need to load the ADDON firmware patch as well as the main patch for the 8281 to function

thanks sorted now, checked software version and it wasn't updated , tried again and now sorted

[calum warthog]

Thanks to this thread. I'm a newbie in Feb 2013. Maybe I'm the last punter to ever to buy a 5402 (M2)...never mind, I'm looking forward to setting it up next week.

[kirkhammacs]

Struggling with this will give it another go

[baroni701]

First off do a factory reset. Download the phantom patch and add on. Copy to memory stick and insert back of box. Go to usb menu and install phantom patch. Reboot and install add on - then reboot. Add c line by way of the IP button bottom right of remote and away you go

[mirkuskus]

Hello same in here. i have followed all instructions but i still cant get it to work ,i have installed the phantom patch as well as the addon but still cant get the c-line to connect it still says disconnected. I can watch youtube, maps in. radio. but not connected to the cline. the one which i have is fine, i tested. always showing disconnected. Any help please?????

[mirkuskus]

BTW, i am czech skylink card user and want these channels to CS.

[digicon]

Hello same in here. i have followed all instructions but i still cant get it to work ,i have installed the phantom patch as well as the addon but still cant get the c-line to connect it still says disconnected. I can watch youtube, maps in. radio. but not connected to the cline. the one which i have is fine, i tested. always showing disconnected. Any help please?????


BTW, i am czech skylink card user and want these channels to CS.


Guys read the :rulez: about this subject before you post anything else


Thank you

[mdt]

BTW, i am czech skylink card user and want these channels to CS.



we cannot discuss that side of it but the tm5402hd isnt the box for it anyway,regards mdt

[mirkuskus]

Sorry didnt know that cant disscus it, but why you think that this rec. is not for it. As previous comments were all about this. Just need to know why its showing disconnected.

[digicon]

the TM5402HD is a closed source receiver and as such can only act as a client box, you state in your post that you have a czech skylink card which you should be able to use in the card reader as once patched the card reader becomes multicrypt what you cannot do with this receiver is send your card data out to other receivers.

[mirkuskus]

I dont want to send my data to another rec. only want to get my lines work, to be connected but have problem with it.

[digicon]

I dont want to send my data to another rec. only want to get my lines work, to be connected but have problem with it.


well all i can say is the Guide on this very thread on page 1 is still valid to this day and nothing has changed with the 5402 in all that time so i would put this down to either User Error or the data you have in the 8281 config is no good

[pparmar231]

Hi all
I have tm5402 on some server. How do I extract cline from the box so that I can go back and install it if something goes wrong? Also I found three different software, tm5402hdci_117 orig, phantompatch and addon, in which order I should install them?]

[digicon]

Hi all
I have tm5402 on some server. How do I extract cline from the box so that I can go back and install it if something goes wrong? Also I found three different software, tm5402hdci_117 orig, phantompatch and addon, in which order I should install them?]



And on that part of your question i suggest you read the Forum Rules

Thank you

[pparmar231]

Hi everyone. I am new to this I have tm5402 box on some server I bought it from a freiend. Slowly I am learning to use it. Thanks to this sight, I got lot of useful info from the forum.

[twister32]

hi guys can some one tell me how i can check my tm5402hd box cccam version.i am using phantom 128p latest one and if there is cccam 2.0.11 version for this reciever available because my cccam provider suggest to use cccam 2.0.11 version.

[digicon]

hi guys can some one tell me how i can check my tm5402hd box cccam version.i am using phantom 128p latest one and if there is cccam 2.0.11 version for this reciever available because my cccam provider suggest to use cccam 2.0.11 version.


The Box itself Emulates 2.0.11 version for you

[twister32]

Technomate software online) is not working

[digicon]

Technomate software online) is not working


Just tried it now and everything seems to be in order and fully operational

[Alan24]

just bought a 90cm dish, motor and technomate 5402, all up and running now, worried about patching etc....but with support and sincere thanks to everyone on here, im going in!!

[ringo1]

how do i put cline sky f5

[benny/9]

how do i put cline sky f5

**********************************
the rules dont allow c/s discussion on this forum
do a google for info on this subject

[mdt]

how do i put ***** sky f5


put in notepad++ and then put on usb stick.. if you use the search function there is info all over the forum/net. regards mdt

[gunnermack]

struggling myself wit hthis box hope can sort it soon

[afshan]

Will this post work today? or is there an updated version of this post?
I have a Technomate TM-5402HD CI+ and need a patch.
Can anyone help please?

Thanks

[yiddo]

TM-5402HD - How to patch and add CCcam/Newcamd support
Find PDF how to guide attached & relevant patch & Add on.

Information from another forum.

Ive added all patches but can't get to server list it won't open I press ip button and 8281 but nothing?

[digicon]

Ive added all patches but can't get to server list it won't open I press ip button and 8281 but nothing?

Which receiver do you have