volvo S60 2001 key programming

[keytech]

HI
My costumer lost the key ,and i make a new one ,its id crypto 48, anybody knows if is a precoding transponder or a normal one like vag ?anybody have a solution for programming the key in that car ,thank you in advance:top:

[keygargoil]

dealer only

[Bllinda]

Or so and nobody scanning the MCU, the mask? There is no access without dealer help?

[malczykos]

Immo is in CEM. Memory flasch TB28F400.
You can make transponder by using proper programmer like TmPro2, Advanced Code....

[gtmech]

dealer only

thats not true mate, i have done keys for these before, locate flash in CEM Module and program ID48 with TMPro2, job done

[Bllinda]

I found only the EEPROM _c86 (http://www.digital-kaos.co.uk/forums/attachments/f177/104567d1329837550-volvo-key-programming-vol.vo.s60-2006_2.4.benzin.rar) remember reading it. Can I help mask the wheels i C86 damp?

[gtmech]

I found only the EEPROM _c86 (http://www.digital-kaos.co.uk/forums/attachments/f177/104567d1329837550-volvo-key-programming-vol.vo.s60-2006_2.4.benzin.rar) remember reading it. Can I help mask the wheels i C86 damp?

are you saying there is no flash in that CEM mate? All you can find is 93c86 ?

[Bllinda]

Flash can be between the plates? I found only _c86.

[gtmech]

Flash can be between the plates? I found only _c86.

Plates? Just take off the square metal panel and flash is in there

[Bllinda]

Plates? Just take off the square metal panel and flash is in there

I'm sorry, mislead you all. Vol.vo '05. S60 car produced in 2005

[dontzapit]

I'm sorry, mislead you all. Vol.vo '05. S60 car produced in 2005

dealer only unfortunately if its 2005

[Bllinda]

dealer only unfortunately if its 2005

Can someone explain the reason should go to dealers?
What is impossible to do?

Thanks

[adam12112]

First reason, can you read/write microcontroller renesans M32C?

[dontzapit]

First reason, can you read/write microcontroller renesans M32C?

and second reason, how are you going to program remote without dealer approved subscription for Vida?

[Bllinda]

First reason, can you read/write microcontroller renesans M32C?

Read and write with no mess Renesans M32C, I found online.
The question of whether reading M32C controller will have the opportunity to read the EEPROM C86 outer diameters?


and second reason, how are you going to program remote without dealer (https://www.volvotechinfo.com/index.cfm?event=info.subscriptions.vidaPricing) approved subscription for Vida?

Will it be necessary to sync the device with Vida When you save me another key?

[Bllinda]

Just a pity that the programmer can not read M#).855.FWUGP.
What kind of programmer you are using Renesans processors to read?
Thank you.

[adam12112]

Read and write with no mess Renesans M32C, I found online. what tool you have to use?, must be desoldering?
Vida without subscription can not program key.
Keys are stored in M32C and this is next task find out where.

[Bllinda]

Read and write with no mess Renesans M32C, I found a network programmer.

I am using transletoriu it accurately translates from my language, sorry.


what tool you have to use?, must be desoldering?

Vida without subscription can not program key.
Keys are stored in M32C and this is next task find out where.

[VolvoGeely]

Well Key is programmed in two places on a P1 platform. CEM & ECM ..

Good luck opening up sealed Controllers , that a key , five min's on a Vida Cart ,+ Key software , It's done ..Collect $$ ,,

NEXT !!

Plus If a Controller (CEM,ECU,UEM,REM ) needs replacing , The Pie server can do a reload and the KEYS still work.

VG

DON'T Pm Me from Nigeria and ask If i will do a remote linking!!!!

But I will get a wire transfer ? Yes ??

[bgcomp80]

Read and write with no mess Renesans M32C, I found a network programmer.

I am using transletoriu it accurately translates from my language, sorry.


M30855FWGP is not in your list, so you cannot read it .

[Bllinda]

I didn't look for a programmer to read it.

[mikeslocks]

With a j2534 buy a new flash and it allows a new key in. Do not use cracked vida why you are on the web page use a different pc. I knew someone who did that?&*$^&*$&*&

[bgcomp80]

In P2 platform Volvo`s from 99 to 2004 the key information is in the flash inside the CEM, after 2005 the key information is in the eeprom .

[pawliukazz]

I found only the EEPROM _c86 (http://www.digital-kaos.co.uk/forums/attachments/f177/104567d1329837550-volvo-key-programming-vol.vo.s60-2006_2.4.benzin.rar) remember reading it. Can I help mask the wheels i C86 damp?

km in dump: 81567 km

2 keys programmed:
CD 4F 89 EE
CD 93 C5 4B

Crypto keys:
89 E7 B0 E9 51 E2 42 XX XX XX XX XX

synchro with ecu:
XX XX XX XX 05 46 93 94 56

[adam12112]

km in dump: 81567 km

2 keys programmed:
CD 4F 89 EE
CD 93 C5 4B

Crypto keys:
89 E7 B0 E9 51 E2 42 38 4B 2A 6B 6F

synchro with ecu:
39 64 50 72 05 46 93 94 56
Can you decrypt all data? What you use to decrypt?

[soxten]

He use Codecard program to see this.
Pawliukazz is great at this type of cem!

[pawliukazz]

Yes i can decrypt all data :)

[adam12112]

It is your software, solution etc. or you purchase it? Can you write me is there vin number and car configuration or only keys and immo code?

[pawliukazz]

It is your software, solution etc. or you purchase it? Can you write me is there vin number and car configuration or only keys and immo code?
My own software

[adam12112]

Can you make virgin eeprrom?

[pawliukazz]

Eeprom is not enough... If you want info about virgin ask soxten.

Sent from my Lumia 900 using Tapatalk