SCANIA SOPS file decryption/encryption/ edition

[diagman]

check out this new tool for SCANIA parameters programming
SCANIA SDP3 SOPS file editor decryption / encryption (http://diagnostic55.com/sops.php)

[Gyula66]

Thx.
SOP file how to decrypt?

[ottomotto]

Thx.
SOP file how to decrypt?

Automotive Diagnostic Solutions: download Scania SDP3 SOPS File Editor Encryptor Decryptor (http://autokeygen.blogspot.com/2011/02/download-scania-sdp3-sops-file-editor.html)

[Gyula66]

Help me!
How do I download from the site?

[baburs]

How do I download from the site?
As i know only 3 company has sops decryption tool.
And all of them sell it copy protected, so best of all try communicate with autokg and buy it, or decrypt it by your self...
But not all changes as it describes...,because some things even changed in sops not change in hardware... you need just try what, and then ask questions to seller....
I never hear that some one has it for free...

[diagman]

downoad XMLEditor package to check how it works (http://diagnostic55.com/sops/SOPSXMLEditor.zip)

[ottomotto]

If someone could "cure" attached it would be :top:

[shrafeie]

Node32 found the "SOPSXMLEditor_diagnostic55.com.exe" file as virus. Is it really a virus?

[domel45]

Does anyone used the editor to disable the AdBlue Scania R420 from 2010 with EMS DC1215 L01 S6 or another Scania?
Apparently when switched off, the information (lamp) remains on the dashboard with error ?

[dieselequipos]

on teory is possible dissable

[baburs]

I recomend to put your's sops file here, may be some one can help you.

[diagman]

Converting EURO5 to EURO3 using SOPS editor
--------------------------
In ECUBlock remove all values.

In FPCBlock change:

2471 to "A"
3458 to "Z"
3459 to "Z"
3476 to "Z"
3488 to "Z"
3636 to "Z"
3647 to "ZZ" (Level Sensor Polution Urea)
3719 to "ZZ"
1837 to "A"

In UFCBlock delete entire 376, 377, 378 blocks.

Replace UFC 384 block with the one below:
<UFC Name="384"><UC Name="340"><SCN Name="475"/></UC></UFC>

In CableListBlock delete blocks: 1546040, 1865584, 1865588.

In VersionBlock add to AffectedEcus=" DAS1, ICL, OPC, RET, EMS, EBS5, EEC3, ELC3, TPM1"

if 3659 = "A" leave DAS1 in AffectedEcus
if 4280 = "B" leave EEC3 in AffectedEcus
if 3133 = "A" leave EBS5 in AffectedEcus
if 3135 = "A" leave ELC3 in AffectedEcus
if 3549 = "A" leave TPM1 in AffectedEcus

Other ICL, OPC, RET, EMS decide by situation if exist leave - if not remove.

Make VersionNumber of IMP file by one number higher than was in EXP file.

[Maartinj]

I can decode SOPS and CODE it back if somebody want. PM me.

[timbermoto]

thanks for that information

[Saulius Saulius]

Converting EURO5 to EURO3 using SOPS editor
--------------------------
In ECUBlock remove all values.

In FPCBlock change:

2471 to "A"
3458 to "Z"
3459 to "Z"
3476 to "Z"
3488 to "Z"
3636 to "Z"
3647 to "ZZ" (Level Sensor Polution Urea)
3719 to "ZZ"
1837 to "A"

In UFCBlock delete entire 376, 377, 378 blocks.

Replace UFC 384 block with the one below:
<UFC Name="384"><UC Name="340"><SCN Name="475"/></UC></UFC>

In CableListBlock delete blocks: 1546040, 1865584, 1865588.

In VersionBlock add to AffectedEcus=" DAS1, ICL, OPC, RET, EMS, EBS5, EEC3, ELC3, TPM1"

if 3659 = "A" leave DAS1 in AffectedEcus
if 4280 = "B" leave EEC3 in AffectedEcus
if 3133 = "A" leave EBS5 in AffectedEcus
if 3135 = "A" leave ELC3 in AffectedEcus
if 3549 = "A" leave TPM1 in AffectedEcus

Other ICL, OPC, RET, EMS decide by situation if exist leave - if not remove.

Make VersionNumber of IMP file by one number higher than was in EXP file.

Someone try do that?

[satsun]

Someone try do that?
3 months and no answer. Does it work?
Is it possible to disable adblue using only SOPS without ECU update (by VERA or sth?) ?
Scania share documents with local conversion (EGRoff, SCR off) but first you have to upgrade SOPS(download, send to headquaters, upgrade new version) then update ECU with VERA.

Thanks in advance!

[ottomotto]

Do you have SOPS before and after from Scania? We can compare and find differences.

[zsoltika]

3 months and no answer. Does it work?
Is it possible to disable adblue using only SOPS without ECU update (by VERA or sth?) ?
Scania share documents with local conversion (EGRoff, SCR off) but first you have to upgrade SOPS(download, send to headquaters, upgrade new version) then update ECU with VERA.

Thanks in advance!

Hi!

Yes, possible to remove toque reducation by NOX, NOX controll, and ADDBLUE without VERA portal.

BR!

zsolt

[zds]

who can post any sops file for e.g.?

[satsun]

I dont have sops from Scania before/after.
zds Sure
Everytime you connect to scania by SDP3, you download data, then you can run it in demo mode and save sops file.
zsoltika so if it's possible maybe you can share the solution?

Decrypted and encrypted sops file in rar.
219093

[sattv1244]

220141 here

[sattv1244]

editor220142

[Alexx60rus]

3 months and no answer. Does it work?


Yes. It work. However MIL will light.

[gizmo666]

i have done some scanias too this sops editor is working good. you only need to know what you do with it;)

[kamiljan]

Do not be stupid. Tell me how to disable MIL light.

[MBGL]

And how to disable "Adblue level" section in ICL menu?

[artursosinski]

Hello, I need Scania SOPS file editor decryption / encryption. Thank you in advance

[RickMM]

Hi artursosinski, I have scania sops xml editor if you need it but decryption / encryption software was come with usb dongle. I am also looking for it without usb dongle. Once found, I wil share here.

[artursosinski]

Hi RickMM. Scania sops xml editor I have. I'm still looking for a sops file encryption. I will also let you know when I find something.