PDA

View Full Version : Change startup volume on RNS-E



jruibarroso
1st August, 2011, 04:44 PM
I was searching for this a long time ago !!

it's very anoying RNS-E start up volume always the same loud volume.

I present where how to change startup volume :

Go to engeenering menu :

1) Turn on RNS-E (with car key).
2) Press the NAV button and release.
3) Press the top-left cursor button for 5 seconds and release.
4) Press the top-right cursor button for 5 seconds. Hold until the screen changes.
5) Go to AUDIO/TUNER menu
6) Go to testmenu3
7) Now adjust on the volume knob to the desired volume for everytime radio starts (should see at top left "VOLUME = xx"). Now you can fool arround on all other menus or just leave radio on this menu for about 5 minutes then remove key to turn off radio . Important is that volume value stays the same for about 5 minutes.
Insert key and radio should start up at desired volume (if not repeat from step 1 and wait +1 minute then last wait)

:celticscarf:

vuno01
3rd August, 2011, 03:44 AM
yeah bro i had the same problem but i went to
dealership and they showed me how to do it
and it was for free

jruibarroso
3rd August, 2011, 10:29 AM
and can you post where your solution ?