Lost my Tunning Settings and no rotation of dish happening

[georgiosr]

I have just managed to unlock my DM 800 HD box and installed a Gemini 2 image with the latest CCam.

Problem is that i have a rotating dish and now i have lost all the settings on the Tuning Settings.

Any idea where to start from... I have a Rotating Satellite and i am Located in MALTA.

Not sure what to put under LNB, Sattelite etc...

[00360362878]

There are 2 good guides in the sickies (in red).
With and without usals.

[andy91]

I have just managed to unlock my DM 800 HD box and installed a Gemini 2 image with the latest CCam.

Problem is that i have a rotating dish and now i have lost all the settings on the Tuning Settings.

Any idea where to start from... I have a Rotating Satellite and i am Located in MALTA.

Not sure what to put under LNB, Sattelite etc...

Have a look at the picture these are my settings but it will give you an idea.
Go to menu/system searching/tuner configuration and choose simple.
Copy the settings the same as my picture.
You now need to put in your longitude and latitude so click on the link below and put in your full address this will give you your longitude and latitude,if its correct your box will move the dish to the correct sats.

Satellite Finder / Dish Pointing Calculator with Google Maps | DishPointer.com (http://www.dishpointer.com/)

Andy.

[georgiosr]

Not sure what is usals and how can i find what i have....??
Thanks so much for your replies so far

[00360362878]

Not sure what is usals and how can i find what i have....??
Thanks so much for your replies so far

Hi George
Usals stands for Universal Satellites Automatic Location System.

You need to decide if you want to set up with or without, as I said before all the settings you need to input are in the sticky threads. Just make sure you enter the correct long/lat for your postal address.

Have you tried doing Andy's way, in simple mode.

[georgiosr]

Thanks 00360....
I thought Usals was some kind of a Brand :-)
Learning every day in this forum :-)
Last one... now.. so i don't open a new thread.
Where can i find an uptodate Channel List that covers Astra, Hotbird and the Sky Uk channels??
I know there are a few on the Downloads of this forum but not sure which one to get so i don't mess up everything..
thanks

[00360362878]

I use catseyes settings, also in the sticky threads mate. Just load up in DBE, edit to your needs and fire them on to your box mate.

[georgiosr]

My Google Map shows the following
Latitude: 35.9209?
Longitude: 14.4913?


What to put on Dreambox instead of these digits that i see now: 005.100 East for latitude?
and 050.767 for Longitude

[00360362878]

Lat 035.920
Long 014.491
you will need to enter (north/west) as per dishpointer

[georgiosr]

Worked!! Thanks a million

[georgiosr]

Only Sattelite channels i cannot Seem to find on my channel list is the SKY UK ones... I have imported the Catsey 2 enigma settings but none of the Sky uk channels are showing.. Am I missing something? Maybe these channels are not part of the Catsey 2 enigma settings? Or its the settings of my tuner?

Thanks once again
(http://www.digital-kaos.co.uk/forums/f39/catseye-enigma-2-settings-225447/)

[georgiosr]

Have a look at the picture these are my settings but it will give you an idea.
Go to menu/system searching/tuner configuration and choose simple.
Copy the settings the same as my picture.
You now need to put in your longitude and latitude so click on the link below and put in your full address this will give you your longitude and latitude,if its correct your box will move the dish to the correct sats.

Satellite Finder / Dish Pointing Calculator with Google Maps | DishPointer.com (http://www.dishpointer.com/)

Andy.

Worked like a dream still no Sky UK channels though to be found... Before i messed my Tuner Settings I could access to all SKY UK channels

[andy91]

Worked like a dream still no Sky UK channels though to be found... Before i messed my Tuner Settings I could access to all SKY UK channels

If you use Catseyes Enigma 2 bouquets on a Dreambox 800hd make sure in Dreambox Edit you click on options and hit the Enigma2 Settings and hit save.
Make sure it says at the base of Dreambox Edit Settings-type 4 if it says 2 you need to hit the tools tab at the topo of Dreambox edit and scroll down to the bottom and hit the toggle between version 2 and 4 settings,that might be your problem.
Other thing use the latest set of bouquets.

Andy.