PDA

View Full Version : MC68HC711E9


mislav88
9th October, 2011, 09:02 PM
Can I use UPA or xprog-m for read/write MC68HC711E9?

Can't find it in support list. Do I read them as HC11 series?
zombek
9th October, 2011, 09:12 PM
Look :) 19str. it's not that ?? and for xprog-m 19 str in user manual
mislav88
9th October, 2011, 09:17 PM
do you mean HC711 are the same as HC11?
zombek
9th October, 2011, 09:40 PM
J think MC68HC(7)11E series can do - yes. Look datashets. Look that it;s for xprog :
Motorola microcontrollers (on-board programming):

MC68HC11A8, MC68HC11E9, MC68HC711E9, MC68HC811E2, MC68HC11E20, MC68HC11G5, MC68HC711G5, MC68HC11N4, MC68HC11F1, MC68HC11PH8, MC68HC711PH8, MC68HC11PA8, MC68HC711PA8, MC68HC11K4, MC68HC711K4, MC68HC11KA4, MC68HC711KA4, MC68HC11L6, MC68HC711L6,MC68HC11P2, MC68HC11F1

MC68HC11PH8(0H30R Q=614kHz) , MC68HC11PH8(3D64J Q=614kHz) , MC68HC11P2(0G10V Q=614kHz) , MC68HC11P2(1E53M Q=614kHz) , MC68HC11P2(3E74J Q=614kHz) , MC68HC11EA9(2D47J) , MC68HC11EA9(1D47J) , MC68HC11EA9, MC68HC05B6/16/32, MC68HC705B16/16N/32, MC68HC05X16/32,C68HC05B32 (new type from Audi CHORUS),MC68HC05H12(0H57A) , MC68HC05E6(0G72G) , MC68HC05E6(0F82B) , MC68HC05X32(0D69J;1H52A) , MC68HC05X32(0D53J) , MC68HC08AZ32 , C68HC08AZ32(0J66D) , MC68HC08AS60 , MC68HC08AZ60 , MC68HC08AZ60A ,
mislav88
9th October, 2011, 09:44 PM
does it also work with clone xprog v5?
zombek
9th October, 2011, 09:54 PM
Give the mask from hc711 J think not all mask make, and look that.
mislav88
9th October, 2011, 10:09 PM
mask is 4K81H

but in xprog-m sw i dont see anywhere option for HC711, only HC11
Zmann
10th October, 2011, 02:23 AM
none of favolite programmers, UPA, Xprog-m nor ETL HC711 supports programming EPROM area, may be possible with with some free SW (home made HW). the picture shows a UV erasable HC711E9.
mislav88
10th October, 2011, 08:39 PM
i need it for airbag crash cleaner and immo off, so xprog-m should do ti without problems?
zombek
10th October, 2011, 08:51 PM
You want do only this one or more ?? xprog-m don't do everything xprog-m is good upa is good etl is better:) always need more and more :) any programmer don't do everything and think none clone don't do everythig what ori.
mexanico1971
13th May, 2012, 07:39 PM
Hi !
I have this mcu to fix !
motorola

996750
ZC441001CFNA
QQJC9722

to read this do I have to ware adapter ?!
do I have to lift some pin ?!
I"m using xprog

can someone help me please !

thank"s in advance
Bllinda
14th May, 2012, 12:43 PM
Quartz connection manifests itself that it is hc05