OBDTestre Ficom Focom

[fifas2010]

Someone has OBDTester setup program.
does this software works with the ELM clone?
I have to exange
FoCOM setup program
FiCOM setup program

BR, Fifas :bounce:

[lee_hdi]

This? - "OBDTester exe" (1.57 MB) - download file (http://www.edisk.eu/download-slow/06267/OBDTester.exe_1.57MB.html)

[fifas2010]

This? - "OBDTester exe" (1.57 MB) - download file (http://www.edisk.eu/download-slow/06267/OBDTester.exe_1.57MB.html)

Thank you !
n
but this is old version, i need new one ): ver 0.1.3303
see foto...

[mattydr67]

Someone has OBDTester setup program.
does this software works with the ELM clone?
I have to exange
FoCOM setup program
FiCOM setup program

BR, Fifas :bounce:

Hi Please tell me if this FOCOm and FICOM works with ELM327 interface?
One more thing. Do you have both interface or one that can wotks with both softwears?
I asked you because I want to purchase this softwera but I have seen any review about item
Thanks
Good luck

[fifas2010]

Hello Mattydr67 , thank you for participating in this post.
I'm actually trying to unravel the functioning of these interfaces,
ficom and focom interfaces and are a little different, but overall are very similar to the known ELM

Same components:

PIC18F 2455-I/SO, 0823V9Q
MCP2515 ***8220;second generation stand-alone CAN controller***8221;
A82C250 (CAN controller interface)
78L08A 8v voltage regulator
9241A 4x potentiometer

i Need OBDtester software to make some experiences...

BR,fifas

[mattydr67]

Hello Mattydr67 , thank you for participating in this post.
I'm actually trying to unravel the functioning of these interfaces,
ficom and focom interfaces and are a little different, but overall are very similar to the known ELM

Same components:

PIC18F 2455-I/SO, 0823V9Q
MCP2515 ***8220;second generation stand-alone CAN controller***8221;
A82C250 (CAN controller interface)
78L08A 8v voltage regulator
9241A 4x potentiometer

i Need OBDtester software to make some experiences...

BR,fifas

If I will can download the OBDTester I will send it to you for sure.
Thanks very much
Good luck

[fifas2010]

mattydr67
Drives to this tools is the same...
Windows USB CDC Driver Setup File for Microchip USB enabled PIC18F2450,2455,2550

ELMUSBN = "ELM-USB Interface"
MFGNAME = "SECONS Ltd."
DESCRIPTION = "ELM-USB Interface"
SERVICE = "ELM-USB CDC Driver"

[nicu_cuc]

i find this ok china market can someone tell me if is good
Ford VCM OBD (http://www.ecutool.com/Ford-VCM-OBD_8129.html)

[mattydr67]

i find this ok china market can someone tell me if is good
Ford VCM OBD (http://www.ecutool.com/Ford-VCM-OBD_8129.html)

Yes it is good
It is a clone of FoCom
But you know, you'll need updates becasue the softwear which come with the interface it is pretty old.
Especially for the CAN cars
Good luck

[lee_hdi]

It's not much more for real one

[rdu04]

Does anyone know what version of software running focom clone? version if it breaks up the interface?

[mattydr67]

The FoCom clone or Ford VCM OBD ( same thing ) can be use with any version of original FoCom
Good luck

[ml759]

The FoCom clone or Ford VCM OBD ( same thing ) can be use with any version of original FoCom
Good luck

AFAIK all clones of Focom have only HS-CAN, so no MS-CAN - has anyone seen a clone with two CAN-buses?

[radrad10]

Maybe the problem is the missing components on the PCB? If anyone has the original Focom, let's put photos of the PCB forum.
The picture below is a mini vcm (china clone) with missing elements.
262940
missing U1, U2, R9, Q8, D3.