Magneti Marelli IAW 1AP.41 pinout (citroen saxo).

[mashupishu]

Hi!,

Had someone the pinout of a citroen saxo 1.6 16v Magneti Marelli IAW 1AP.41 pinout?.

Thanks in advance for you support.

Regards Mashu.

[mashupishu]

I had found in another place this picture, but I'm looking for the MIL (Malfunction Indicator Light) pin which is not indicated in the schematic. Could someone tell me the MIL pin number and confirm me that pin 35 and 13 must be connected to 12v? (I want to try it on bench)

And finally, are all the IAW 1AP ecus pin compatible?

Again thanks. Regards Mashu.

[Zmann]

Hi,
MIL ECU pin9, +12V
ECU pin 35 & 13 to +12v for bench test

[mashupishu]

Hi Zmann!!, it's nice to hearing from you ;).

Pin 9 for MIL, annotated, thank you for helping me/us.

Kind regards, Mashu.

[astrios]

I had found in another place this picture, but I'm looking for the MIL (Malfunction Indicator Light) pin which is not indicated in the schematic. Could someone tell me the MIL pin number and confirm me that pin 35 and 13 must be connected to 12v? (I want to try it on bench)

And finally, are all the IAW 1AP ecus pin compatible?

Again thanks. Regards Mashu.
is this the pinout of iap.41 of 106 s2 16v?

[gsmrepair]

Hi

1Ap.41 pinout is the same as 1AP.40 and 1AP.80

[rgnaya]

sorry friends. i have to get pins for diag for delphi/autocom . is for race car and need to connect ecu to diag machine to read dtcs and logging data.
i have tried pin 31 to k-line , gnd and +12 and have tried with no success. thanks in advance

[Haitham saadany]

thank you,
is this pin out for iaw 1ap.40 ? i mean what is the difference between both 40 and 41 ?

[Haitham saadany]

could you locate the EOBD pin out ?

[Louislesinge]

could you locate the EOBD pin out ?

Hi,
The way i read them on the bench:
36,54 ground
35 + batt, 13 ignition
Diagnostic: 12 L line, 31 K line (both are essentials)
Greetings,

[cosimo]

hello, the 13 ignition clearly goes positive right?