how repair the drive control (cpc/fr) for truck mercedes axor

[uchtool]

hello!
I need help about repairing this module box of Mercedes truck axor.
reference:
A 002 446 13 02
Electronic CPC/FR
Siemens VDO A2C53246424

This truck start normally, but the engine accelerator not work (not have power).
we changed with an other the accelerator worked normally.

my question is:
possible to reprogram this box?
how so?
which electronics component must be the raison of this fault?

thank u for all

[knok]

hello!
I need help about repairing this module box of Mercedes truck axor.
reference:
A 002 446 13 02
Electronic CPC/FR
Siemens VDO A2C53246424

This truck start normally, but the engine accelerator not work (not have power).
we changed with an other the accelerator worked normally.

my question is:
possible to reprogram this box?
how so?
which electronics component must be the raison of this fault?

thank u for all

this black box was under water ? or have water inside ? Usually this is happen ....

[cartech]

hello!
I need too a good info about this unit?
who have dumps for this unit, how adapt it with das?
which big problems for this unit
thanks for all

[uchtool]

this black box was under water ? or have water inside ? Usually this is happen ....


hello!
this box is intact, no water,...all is ok
is there any electronics problem?
or
have any virgin dump to program it with mb star?
please share more info
thanks

[butugan_mihai]

I have some problem with A 001 446 13 02 fr drive control in Actros.I need flash for this type.When i make diag with star part number will appear A 000 000 00 00,and i cant make update with sd flash!

[butugan_mihai]

SOLVED!.................................

[tuberider]

..what was the problem ?

[uchtool]

SOLVED!.................................
how did u resolved your problem?
please share it
thanks

[butugan_mihai]

Hi!I reprogram flash 29f400 with a good bin and 95320 eep.That is all!

[uchtool]

Hi!I reprogram flash 29f400 with a good bin and 95320 eep.That is all!
please share here these dumps
thanks

[butugan_mihai]

First :you have a sw or hw problem?If you have a sw problem i send you dump.Watch carefully at what part number will appear when you make diag.If part number will appear correct you have a hw problem.

[uchtool]

First :you have a sw or hw problem?If you have a sw problem i send you dump.Watch carefully at what part number will appear when you make diag.If part number will appear correct you have a hw problem.
I don't know if sw or hw problem!
but need dumps to added to my data repairing
thanks

[renesis]

I have the same problem.
According to DAS, the vehicle has a faulty throttle actuator (accelerator). Replaced a new accelerator but unable to work as well. Cant even re-learn the accelerator.

Can I replace the FR control unit with a new one? Do I need to program the transponder or what?

[butugan_mihai]

Hello!I'm sorry for the delay!In my case 25320 was the problem.