BOXER III DTC P062B and P0200

[hector]

Hello , I've a Boxer III doesn't start.
With PP2000 has Fault code P062B and P0200. it i can't erase.
Any idea?

Engine: DIESEL TURBO PUMA 22DT 100CV
Year 2008

Thanks

:party:

[djamelEZS]

it's ecu problem with vieston dcu102 you cpu st10f275

[Meat-Head]

has somebody tried to do a Justy22 with them red and black leads?

[hector]

it's ecu problem with vieston dcu102 you cpu st10f275
OK. and the solution?
* change the ecu?
* repair the ecu?
* make new downloading with PP2000 or diagbox? .

Thanks!!!

[hector]

Thanks friend....
Problem "FIXED"
There is a info flash with the solution!!
Sorry but is in spanish!!

[Meat-Head]

There is a info flash with the solution!!
Sorry but is in spanish!!


Doesn't matter you have photos which are more helpful than anything.

Chaffed wire on metal support bar - behind fusebox - next to ~ABS - brillant.

Did it start of had it damaged anything?

Nice upload - nice to see no password.

Meat

[Stule]

I have same problem with my Boxer 2006 same dtcs only i have one more p0683

[Griunvaldas]

I have Citroen Jumper 3 (Boxer 3 same) 2.2 with DCU-102 and DTC P0683 - Glow plug relay malfunction. I tried another relay, replaced glow plugs, now got another ECU and same problem. Can't find anything to complain. There's activation with Lexia, for glow plug relay, I can see PWM signal coming from ECU, but relay doesn't activate. Anyone had something familiar?

[m0rd0k]

Thanks for the photos and help. I have the same problem,and these pictures fix it. Thanks from Hungary! ;)

[autoden]

Blown fuse due to POST heater plugs maybe.

[wbart]

Hallo
I have The same problem p062b and p0200. I checked wirning bcm-ecu, ecu-injectors, fuses all is ok.
I opened ecu also ok.
Any ideas ? Maybe ecu is damage?
Auto Citroen jumper 2007 2.2 hdi 4hv 100hp

Wysłane z mojego SM-G390F przy użyciu Tapatalka

[janusz21]

P0200 ecu is damage

[wbart]

I tought so

Wysłane z mojego SM-G390F przy użyciu Tapatalka

[wbart]

P0200 ecu is damageNew ecu and All is fine

Wysłane z mojego SM-G390F przy użyciu Tapatalka

[DFG]

Thanks Man!

[DFG]

I have the same problem, it cranks, but it doesn´t start...

[wbart]

Check the wirning under left lamp, if is ok ecu is damaged.

Wysłane z mojego SM-G390F przy użyciu Tapatalka

[IrishRog]

Hi Test or my boxer has the same codes cut out every 100 metres. Just made it home last night. Is the in for you had attached still available as I can't seem to access it? Thanks

[IrishRog]

Hi Hector my boxer has the same codes cut out every 100 metres. Just made it home last night. Is the in for you had attached still available as I can't seem to access it? Thanks

Sorry that should have said hector but autocorrect caught me out

[IrishRog]

Folks
I came across this which helped me when trying to understand the Peugeot Boxer wiring
http://www.autoelectric.ru/auto/peugeot/wd/wiringdiagrams.htm

[adjee]

Thanks for the photos and help. I have the same problem,and these pictures fix it. Thanks from Hungary! ;)
Hello friends
Can I have the password please

[kmlp]

many thanks, why hector is banned?! :itsme:

[illuminatus]

hello i have the same problem, can yours hep me please? i dont have see the rar archive

[wbart]

Check the wirning under left lamp, if is ok ecu is damaged.

Wysłane z mojego SM-G390F przy użyciu Tapatalka[emoji106][emoji106][emoji106]

Wysłane z mojego SM-G390F przy użyciu Tapatalka

[Litowu]

Thank you Héctor, i hope it works for me...

[Litowu]

Thank you Héctor, i hope it works for me...

[BusCan]

Hi
I'm having a problem with a DCU-102
Default code
P0200 Default Tension Converter
I change the CPU ca does not change anything, Transistor OK
If a person can give me information it will be great
Thank you

[mtutus]

I have same problem (p0200-p062b) but not damaged wire solve the problem.
FİXED-- Change micro software and than solve the problem. If you have a questıon ask me.

[BusCan]

I have same problem (p0200-p062b) but not damaged wire solve the problem.
FİXED-- Change micro software and than solve the problem. If you have a questıon ask me.

Hi
I changed ÉCU
Thank you

[dehacko]

HI
I have the same problem car ducato does not start, DTC: P026B and P0200
I changed the fuse yelow f 11. see photo 642412

the car is already starting, only error P026B remains , everything works

[InfoPerformance]

Hello.

someone has fixed the p0603 dtc???

thanks.

[Tachodiag]

Soft corrupted

[daniboy]

Thanks friend....
Problem "FIXED"
There is a info flash with the solution!!
Sorry but is in spanish!!


thanks man... i have same problem ... work 100%

[Shaprog2010]

Hi, how do I view the photos mentioned in this section please.

[Shaprog2010]

thanks man... i have same problem ... work 100%

Hi, I have the same problem, can you tell me how to access the photos please.

[elektr0]

I have same problem (p0200-p062b) but not damaged wire solve the problem.
FİXED-- Change micro software and than solve the problem. If you have a questıon ask me.

Hi , with what software?? a virgin file? i have a Jumper van (120 2007) with the same problem , I dumped ECU with ktag, and burned it to another one, and the same error, the fuses are fine, the wiring too
and the same error, the fuses are fine, the cables tooand

[ZINE DDINE]

hHI I HAVE SAME BROBLEM
P062B
ANY HELP PLEASE
THANKS

[k33jti]

New ecu and All is fine

Wysłane z mojego SM-G390F przy użyciu Tapatalka

Hi, we have the same issue. May I ask how much did you pay for new ecu - ecu + mechanic's work? we got 4 k PLN as the cost estimation for both :/

[gtr1401]

Thanks friend....
Problem "FIXED"
There is a info flash with the solution!!
Sorry but is in spanish!!


thx for the archive!

[hichem2161]

Thanks friend....
Problem "FIXED"
There is a info flash with the solution!!
Sorry but is in spanish!!
Hello i have same prob can you help me please

[hichem2161]

can you help me i have make egr off after that car dont start go back ori flach same prob and i have P0200

[hichem2161]

I have same problem (p0200-p062b) but not damaged wire solve the problem.
FİXED-- Change micro software and than solve the problem. If you have a questıon ask me.

can you send me micro software please i have same prob cant fix

[Schachmatt]

Hey guys same issue ; P0200 - P062B,

Checked Injectors they have been new (850km ) ish. they got (1.2 Ohm with wiring - 1.1 Ohm without)
Checked wiring to ecu (fine)
ECU is new (went in 850 km before)
Due to had the same issue mechanic was changing everything everything was running well until now...

Cant be true that the ECU or injectors are damaged once again.
I do not have a Osziloscop, so I can just guess I m not sure about the ECU software or anything else but seems like the mechanic before missed something out what else could I check before I send the car back. If I start (injector 2 is leaking diesel from the shaft)

I can not open the picture from hector @meat-head in the first page someone a tipp how to open it?

[Dusza]

Też by mi się przydało problem z visteon