Peugeot Boxer Year 2007 Dash Problem

[bokilee]

Hi, I have problem with Dash from Peugeot BOXER Year 2007, eeprom 95040. Car can't turn 399999 km, after that ------ is on the display. I use second hand Dash, try to calculate 425960 km, but no success with TachoSoft it is not posible, with NYO I have ------ on Display. Is it problem in the dash or Citroen BOXER can't turn 399999?

[Eight]

Set the original dump.

[bokilee]

Hi, here it is. This is dump from original Dash.

[bokilee]

Dash do not have hardwer support for distance biger then 399999 km.
Magneti Marelli
Year 2007
eeprom 95040
If U have problem like this, dash is good, but engineers did not think that boxer will go distance biger then 399999 km:manuflag:
Best regards,
bokilee

[furnata]

Any solutions for this problem mates ??

[JustMeAgain]

Knock itback 30k and sell the van. At least the clock will be ticking.

[TULGEYWOODMAN]

Any solutions for this problem mates ??
The problem is not yours !
The problem is with the manufacturer
I think van must be fckued at that kms..........
send to chopper up machine.

[I think 399999 translates into asci as.........h.e.l.p.]

[mellon]

I have the same problem. Mileage stoped on 499999 in peugeot boxer 2011. I had iveco with stopped mileage last year and I changed mileage in ecu and cluster but this is not help.

[Morpheos3]

I used to roll it back to 10 KM ... the dash cant read more than 399999
Nothing wrong with u`re dash ... it is a common failure for those Boxer`s

[km666]

must write litle km in 399999

[mellon]

I program 10km but still the same - stoped on 10km

[matias]

Hello I have different problem in Peugeot Partner. I set mileage about 5k km. And all is right to time when anybody disconnect battery. For example in dahs is actually 20k km and after disconnect/connect battery is 5k km.
I set km only in dash. No in edc. Who has the same problem?
Many thx
Matias

[WENKAT]

Hello I have different problem in Peugeot Partner. I set mileage about 5k km. And all is right to time when anybody disconnect battery. For example in dahs is actually 20k km and after disconnect/connect battery is 5k km.
I set km only in dash. No in edc. Who has the same problem?
Many thx
Matias
it depends on system,only full can adjusts the dash with the bsi
Sorry been wrong;only with the small BSI there is no correction of mileage,so with no COM

[c92380]

stoped on 10km - thanks in advance