What ECU's does ECUSafe work on, guaranteed?

[JaboJG]

Trying to compile a list of ECU's that users have had success with.
E.g. some say Opel EDC16 doesn't work right, some says it does.

So please contribute below and let us know what models you've had success with using version 2.0 :)

[wiseman]

E.g. some say Opel EDC16 doesn't work right, some says it does.

to remove Dpf correctly from opel/vaux edc16c9 requires a full BDM read and not a partial with MPPS for e.g
This is probably the reason you are getting mixed answers because technically they are both correct

Ecusafe 2.0 is garbage anyway,doesnt work properly, full of bugs

[JaboJG]

to remove Dpf correctly from opel/vaux edc16c9 requires a full BDM read and not a partial with MPPS for e.g
This is probably the reason you are getting mixed answers because technically they are both correct

Ecusafe 2.0 is garbage anyway,doesnt work properly, full of bugs

I know that it's buggy but it must work on some ECU's or nobody would be using it.
So is it safe to add Opel EDC16C9 (BDM read) to the working list?

Feel free to add more!

[JaboJG]

Please contribute guys!

[JaboJG]

Still waiting on contributions.
Any more ECU's that ECUSafe definitely works with?

[kazikk]

I have removed DPF from this cars using EcuSafe2 :
-Ford Focus 2007 EDC16 - Read via OBD
-Transporter T5 2,5TDI EDC16 - OBD - (have to desolder DPF light from dash :) )
-Citroen C5 EDC15 - OBD
-Peugeot 307 EDC15 - OBD
-Vectra C EDC16 - BDM read
-

[Fenderman]

Renault Laguna EDC16 BDM read.
Some Sprinter OBD read.
Alfa Romeo EDC16 BDM read.

[JaboJG]

More, more, more! Give us more!

[eduardo74]

Renault Scenic 2005 1.9dci 96kw EDC16 full bdm
Peugeot 607 2.2HDI EDC15 via obd

[macxlulu]

ecusafe not work -you must manually disable or switch in

all ford 1.6 tdci not work -come back sooner or later, regeneration work -car smoke (regeneration on)

psa, mazda 1.6 (regeneration on)

all MB -sprinter etc --car smoke(regeneration on) increases the engine oil level

all psa volvo etc sid 803/sid 803a sid 206 -car smoke (regeneration on)

1.3 mjd alfa opel --car smoke (regeneration on)

vag 2.7 3.0 tdi -increases the engine oil level (regeneration on)

crafter (regeneration on) car smoke

2.2 hdi edc16 3.0 hdi (regeneration on) car smoke (after 500 km) and back dtc

vag ppd 170 -car smoke (after 500 km) -and back dtc to dash

kia honda -not work usually limp mode or regeneration work

alfa 2.4 edc16 -I have not tested only ecusafe + always manually turn off even regeneration

bmw 3.0 and 2.0 not work correctly most often (but not always) regeneration on + limp mode +error on MMI

opel 2.0 cdti -limp mode

2.0 dci -limp mode

not work for all edc17


I made more than 1,000 cars in the dpf and know what to tell so please treat this as a good advice ...

course of each of these cases there is no problem after manually switched off dpf...

work ok:
Fiat dublo mjet 1.9
opel saab alfa 1.9 120 ,150
all psa edc15
usually for the 1.9 TDI(not always for the engine- bls) and 2.0 TDI
1.9 dci 131 (scenic ,laguna.suzuki grand vitara etc)

more do not remember how I remember it in will add...

[JaboJG]

What about PSA EDC16? e.g. Peugeot 407 1.6 HDI Bosch EDC16C3

[lee_hdi]

It still regens

[macxlulu]

What about PSA EDC16? e.g. Peugeot 407 1.6 HDI Bosch EDC16C3

PSA CITROEN MAZDA 1.6 - 109 ps regenaration still work edc16c34
ec16c3 and edc16c34 -versions came out without a dpf, just ... :) although simpler disable switch in

[JaboJG]

Big thanks for all the contributions so far lads. Any more to be added?

[JaboJG]

Ok, last time this is being bumped. Any more additions?

[btr]

Work,tested:Suzuki gran vitara 2.0 edc16
Lancia 2.0;2.2jtd edc15
fiat ulysse 2.0;2.2jtd edc15
vw touran pd edc16 +(need eeprom reset)

[btr]

It still regens
You are right, every 100km regen.And ecusafe hide all faults..

[aksimo]

ecusafe not work -you must manually disable or switch in

all ford 1.6 tdci not work -come back sooner or later, regeneration work -car smoke (regeneration on)

psa, mazda 1.6 (regeneration on)

all MB -sprinter etc --car smoke(regeneration on) increases the engine oil level

all psa volvo etc sid 803/sid 803a sid 206 -car smoke (regeneration on)

1.3 mjd alfa opel --car smoke (regeneration on)

vag 2.7 3.0 tdi -increases the engine oil level (regeneration on)

crafter (regeneration on) car smoke

2.2 hdi edc16 3.0 hdi (regeneration on) car smoke (after 500 km) and back dtc

vag ppd 170 -car smoke (after 500 km) -and back dtc to dash

kia honda -not work usually limp mode or regeneration work

alfa 2.4 edc16 -I have not tested only ecusafe + always manually turn off even regeneration

bmw 3.0 and 2.0 not work correctly most often (but not always) regeneration on + limp mode +error on MMI

opel 2.0 cdti -limp mode

2.0 dci -limp mode

not work for all edc17


I made more than 1,000 cars in the dpf and know what to tell so please treat this as a good advice ...

course of each of these cases there is no problem after manually switched off dpf...

work ok:
Fiat dublo mjet 1.9
opel saab alfa 1.9 120 ,150
all psa edc15
usually for the 1.9 TDI(not always for the engine- bls) and 2.0 TDI
1.9 dci 131 (scenic ,laguna.suzuki grand vitara etc)

more do not remember how I remember it in will add...

Hallo what you mean (you must manually disable or switch in)?

[macxlulu]

yes must remove manually

Yesterday I had the strange case a6 2.7 2007 tdi when switched off manually, it appeared not a software error and turned off one bit :) very strange:)
So we had to do ecusafe and manually turn off but the same regeneration

[peko]

yes must remove manually

...
So we had to do ecusafe and manually turn off but the same regeneration

what you mean " manually " ? use ecusaf to remove dpf from flash , and manualy remove dpf from car ? or what do you do manualy ?

[macxlulu]

dpf it was impossible to turn off the switch in a flash -error software
so I had to use the ecusafe + winols manually disable maps in the regeneration in flash

I use google translator sorry

[macxlulu]

I've done today Vito 2.2 111 2006 dpf off at 1MB file edc16c3
in the case of MB ecusafe or Swiftech perfectly limp mode deletes
but if the problem is edc16c3 -3000 rpm and limp mode
ecusafe does not erase the failure mode, Swiftech just technical support We could not council ... still limp mode

manually turned off the all-limp mode and flash file.not work....

later, I started searching for a switch from dpf
after 40-50 try dpf switch managed to disable the switch in the flash

switcher found :) dpf off :)



of course, was not without interruption transmisi ,mpps and flashtec ecu not found recovery mode not work:) but good luck in edc16c3 reading OBD is the same as reading BDM:)


Beware of MB edc16c3

[peko]

hi friend

today i test ecusafe on A3-2L-TDI-140 edc16u31 and no work !

i test edc15 psa on 406hdi and work fine
;)

[pepeoi]

I did :
Alfa romeo 2.4JTDM EDC16 - worked OK
BMW 530D EDC16c31 - worked OK
Touareg 5.0TDI - worked OK

[peko]

I did :
-----------
BMW 530D EDC16c31 - worked OK
Touareg 5.0TDI - worked OK

very strange !!! i test on 330D e90 edc16 and no work !

[igendek]

PSA cars on EDC15 work properly

[peko]

laguna dci ( start butom ) edc16 = fine !