Jumper 3 BSI mileage

[baltazar3]

Need correction mileage for Jumper3 2008y
MM BSI eprom 95160.Need to set 141400 km
Thanks in advance !

[CARPARTS]

? jumper or Jumpy ? there is big difference !

[baltazar3]

Jumper 3 BSI Magneti Marelli 503440020206
NBC250A
1358239080

[CARPARTS]

strange, only citroen jumpy-3 have BSI + dash

Jumper-3 only have km in dash / 95040 chip

[PremierD]

The dump has no km's in it mate .. lol

[baltazar3]

The story is :
There was a lot of water in old BSI and ECU and customer find somewhere used set (BSI+ECU).Car was start but mileage on dash blink all the time and oil lamp too.Maybe because VIN in dash and BSI not match.

[CARPARTS]

maybe try to copy-paste the data from water-bsi to other bsi.

km blinking means dash is not teached in
same in fiat ducato etc...

[baltazar3]

strange, only citroen jumpy-3 have BSI + dash

Jumper-3 only have km in dash / 95040 chip
Its 100% Jumper 2008y with Visteon engine ECU and BSI Magneti Marelli.

[CARPARTS]

then its a 2.2 HDI with 10F276 micro in the ECU where all data is inside this micro

i never tried to copy/paste those ecu's

maybe better to re-adapt the dash instead of playing around with the ecu and the bsi. car start now, so leave BSI and ECU original. (my opinion)

to re-adapt, i have no idea how to do, someone here on DK probably will know how to do....

[javilette]

no need adap the dash , read the dtcs of the bsi and the dash whith lexia ,the bsi dont have km and for the bsi you need copy the micro smd 95160 and nec mcu whith the 95160 only dont works .i changed mcu this in ecu visteon used because i had one citroen jumper that the ecu broken and broken the bsi too i put a used one and works all ok the puegot boser and ucatos is the same bsi but the ecu of the ducato is edc16 no visteon.

[marcolr]

Its 100% Jumper 2008y with Visteon engine ECU and BSI Magneti Marelli.

Solution for blinking Km is adapt dash to BSI with Lexia. 100% working. I had the same problem and solved it with Lexia.

Regards