Need Dump for 2002 360Modena 24c02

[bkenigma]

Hey whats up everyone. Had a friend try and just read a 24c02 chip and couldnt get a good reading. For whatever reason when he powered it back up it shows all 999999 on the dash. Im assuming somehow he corrupted the eeprom. Would like to try and either put virgin bin on it and then change mileage, Or gonna just let him send it out for someone to just replace the 24c02 chip and reprogram it as im too busy these days.

Thanks
bkenigma

[LoRaier]

I have this one

[bkenigma]

Do you know if this is in Miles or KM. And how many are in this dump?

Thanks in Advance
bkenigma

[bkenigma]

I have this one

Loraider,
Are you sure this is a good dump? It's only 256 bytes? Does anyone else have any other 24c02 modena dumps they can post to compare it to or if you have any experience check out this dump and let me know if this is complete.

Thanks in Advance,
bkenigma

[captain crackers]

what is the spec of the car. miles, km, auto, manual, soft top, hard top? I can possibly help. Arthur.

[LoRaier]

Loraider,
Are you sure this is a good dump? It's only 256 bytes? Does anyone else have any other 24c02 modena dumps they can post to compare it to or if you have any experience check out this dump and let me know if this is complete.

Thanks in Advance,
bkenigma

Yes, is a good dump. Is from a cluster I repaired some time ago. The size is correct, but I don't remember its mileage.

Try this another one. Is from a Ferrari 360 Modena
(340 km/h, 10000 rpm) - Km. 25048

Cluster label:

FERRARI 131 190026
23/MC06.67/0 KmH C Eur
60.5296.990.4
09/04/2002

[bkenigma]

what is the spec of the car. miles, km, auto, manual, soft top, hard top? I can possibly help. Arthur.

Arthur,
Thank you very much. I will let you know the specs tomorrow if the dash isnt fixed yet. If you have some experience with these let me ask you a question. A friend of mine had a dash dropped off at his shop to be repaired, the PRD1234 and Display window was out, but odometer was displaying properly. Anyways he wanted to play around with my usaprog, hooked it up to get a read and for whatever reason just couldnt pull a reading from it. Read it at 3.41 volts, and I think he went maybe to 4.15 but no higher. After reconnecting to car, dash displayed ------- . I've never had this issue before and im sure he connected everything correct as he's not really a noob, so i was thinking to either try to just rewrite the eeprom or replace the 24c02 chip and then rewrite if the current chip is corrupted to the point where i cannot rewrite to it.

bkenigma

[Safety]

this web upload failed. here good dump

Deposit Files (http://depositfiles.com/files/uuw59a4wn)

[captain crackers]

I always remove the chip for this car but having said that it is a known but not a common fault for the eeprom to go down. Normally it is possible to get a good dump from the eeprom but the car shows ------. You need the correct dump because all the spec of the car is displayed in the cluster ie. mph/kph, soft top warning display, auto gear display etc. Arthur.

[mikes911]

Since the manual gearbox cluster still has the gear display window but remains blank, is it possible to program the cluster to display the gear rather than just taking up space?