help on 02 toyota tacoma mileage correction

[happy1]

hello everyone im new at this but im a quick learner.can anyone tell me what program i need for all toyota tacomas..frm 98. to 05..on correcting the mileage.thanks. or a website....would be nice also

[andersonmaxi]

u need to read 93c56 in the dash

[happy1]

ok so i bought the tacho universal 2008.. it came with alot of cables and boards i tryed to read it but it says data not equal please adjust the clip..and press ok..whats happening..?

[Autotecno2006]

"data not equal please adjust the clip" means that u are not connected corectly. what kind of sif socket have u got ? Post picture of how u have connected chip, regards P.

[claudio35]

Desolder the chip and read

[autodiagnostic]

hello everyone im new at this but im a quick learner.can anyone tell me what program i need for all toyota tacomas..frm 98. to 05..on correcting the mileage.thanks. or a website....would be nice also

I though tacho pro U2008 and digimaster 3 will work with Toyota Tacomas mileage change, but the answer is not, who knows does DigiProg 3 support Toyota Tacomas ?

[autodiagnostic]

ok so i bought the tacho universal 2008.. it came with alot of cables and boards i tryed to read it but it says data not equal please adjust the clip..and press ok..whats happening..?


try the other car models. good luck!

[martij976]

ok so i bought the tacho universal 2008.. it came with alot of cables and boards i tryed to read it but it says data not equal please adjust the clip..and press ok..whats happening..?


First at all.. If U want to do this seriously NEVER!!! buy china sh*t to do 4 U... I'm serious !!!

[tranzavanza]

98-05
We are talking about 2 different clusters.
From 97-02 you need to read the 93C46 03 and up is 93C56

On the first one you need to remove the display from the little white box that's got the odometer.

The second one needs to be corrected properly dropping the las bit by one so it will not freeze.

both can be done with basic eeprom reader like upa, digimaster or X-PROG.

Use mileage calculator to calculate the value. you might need to do some swapping on the hex. so take a look of the dump that you get on your file and compare to whatever you get from them mileage calculator.

[happy1]

thanks everyone for your help so far..anothet question i have is.is there a program for computer that i would be able to read the mileage..? if there is what type of cables do i need....thanks again everyone for your help...!

[indersekhon1]

98-05
We are talking about 2 different clusters.
From 97-02 you need to read the 93C46 03 and up is 93C56

On the first one you need to remove the display from the little white box that's got the odometer.

The second one needs to be corrected properly dropping the las bit by one so it will not freeze.

both can be done with basic eeprom reader like upa, digimaster or X-PROG.

Use mileage calculator to calculate the value. you might need to do some swapping on the hex. so take a look of the dump that you get on your file and compare to whatever you get from them mileage calculator.


hi please help me i am using tacho pro to change my car odometer and i am using epsrom clip 93c56 and its saying value not equal everytime and it show wrong old value on the system. my car is showing 335700 and after conecting with 93c56 it show old value 666665 ,please help me how to fil equal value. thanks

regards

[neospeedo]

grab that file and post it here!