CM871 DPF delete

[PabloUA]

Hi to all.

Peole say that there is cal. file in InCal, that lets delete DPF on ISX15 /400. Is that true? if yes, please share!

[ecutuners]

If you post the original flash from ecu i cen remove dpf from the software.

[PabloUA]

how to pull flash? with BDM? ore with calterm?

I wanted to load file from InCal.

Some cm871 flash files are marked no aftertreatment mexico and aust. Have researched these engines and all have egr and precoolers but no dpf fliters. Have one downloaded in a spare ecm but never had a chance to try

[PabloUA]

I've just got Engine image file, had no opportunity to pull calibration. Laptop with CalTerm is not ok now, so I thought I can use file from Incal. May be I'm wrong

[ecutuners]

If you tell me which ecu is inside i can tell you how to read flash.

[PabloUA]

I did not open it. I have image file only.

BTW, I have Flash dump from CM870 w/e EGR, is it useful for you?

[Bigdawg777]

If you post the original flash from ecu i cen remove dpf from the software.

Can you remove egr from cummins ISX flash file?

[shisik]

Hi to all.

Peole say that there is cal. file in InCal, that lets delete DPF on ISX15 /400. Is that true? if yes, please share!

Engine SN ? I will help disabled DPF ....

[crazy60]

have a 2006 isx need 500 hp with egr and vgt turbo delete, anyon e have a cal?

[justme84]

Engine SN ? I will help disabled DPF ....

Is it possible to disable DPF and EGR? Or is a custom flash file needed?

[ghostspeedp]

If you post the original flash from ecu i cen remove dpf from the software.

hi
you can help me
i need delete DPF on cm871 you can do?

[jctech]

Just a warning before anybody pays to have DPF deleted from the ECM by somebody who does not want to know any vehicle information. (and EGR/VGT)
It is one thing to delete the DPF sensors from the calibration, but you also need to disable regen and the other ECM tests and Insite tests, or else you will have an active fault code that is impossible to make inactive because it will be impossible to do a regen or carry out the Insite test with no DPF fitted to the vehicle.
And when regen is disabled - is the switch multiplexed, you need to think about possible VCU faults as well.

[moza]

you can help me
i need delete DPF on cm871 .please help

[dlogi]

So jctech I was wondering on an ISX 15 is there a way to put resistors in the EGR temp circuit and the EGR pressure differential so they read an optimal temp/pressure and then plug off the gas flow thru the EGR? Would a static "temp/Pressure" work or do they have to change with various engine conditions?

[jctech]

So jctech I was wondering on an ISX 15 is there a way to put resistors in the EGR temp circuit and the EGR pressure differential so they read an optimal temp/pressure and then plug off the gas flow thru the EGR? Would a static "temp/Pressure" work or do they have to change with various engine conditions?

static temp and pressure readings will not do it, the pressures and temperatures need to change with engine load

[parezoo]

I think i finally got it on another ISX CM871.....

[SaMirakle]

What have you got figured out? :)

[parezoo]

What have you got figured out? :)

How to download the cal with deleted egr and pdf to another truck...

[jdawg]

did you figure out how to upload the file from ecm then download it in another?

[parezoo]

did you figure out how to upload the file from ecm then download it in another?

Yes sir I guess i did....

[ashkar]

So from what I gather when I pay to get a tune done id have to relay what my calibration number is....AV10098.17, so i'm guessing theres only a handful of calibration numbers. Also, the tune would differ as to if vgt was kept on engine or if non-vgt turbo was installed.

With this copy and paste feature youve figured out there's potentially a way to build a inventory of pre-made safe tunes here on dk and share. I have access to a handful, including 1 cm2250 complete vgt/egr/scr/dpf delete.

[trucks]

How are you guys uploading cals from CM2250 with calterm if nobody has the ecfg for them

[parin]

I can help you to do this you have insite and bench cable ?

[rp1210a]

can anyone help me out with the ecfg file for p/n 3684275 ecm with 10053.20 cal. need to remove dpf only.

thanks guys

[SaMirakle]

You know how to remove DPF or you want to try?

[rp1210a]

I want to try, have used calterm and almost every other truck soft out there. Whats the worst that can happen???
Dont answer that. :afraid:

Im looking for any of the following:

Ready flash file with DPF removed for 3684275 ecm with 10053.20 cal.

ecfg file and instructions on what settings to change

Any help would be greatly appreciated. If you have what i need and are willing to share great. If you need $$$ for YOUR work thats fine also. I know this is how some people make a living so if you dont want these files posted i can respect that. Just let me know via PM.

[vibhavi]

can you snd me file

If you post the original flash from ecu i cen remove dpf from the software.