i need nissan bosch LCN code

[fukukum]

hello
i need code nissan LCN EU :(
7 612 830 052 BOSCH
CM0052 A 1439182

thanks


http://img854.imageshack.us/img854/6828/nissanlcn.jpg (http://img854.imageshack.us/i/nissanlcn.jpg/)

[fryderyk 10]

Read flash, code inside.

[EFAITH]

hello
i need code nissan LCN EU :(
7 612 830 052 BOSCH
CM0052 A 1439182

thanks


http://img854.imageshack.us/img854/6828/nissanlcn.jpg (http://img854.imageshack.us/i/nissanlcn.jpg/)

Could try code 7 4 6 6

[bonus2010]

only dealership/service can supply serial code for this one :(

[fukukum]

Could try code 7 4 6 6
not code7466 :(

[fukukum]

have anyone working on Nissan bosch LCN code ? or any programmer for it

[oemrepair]

No dealer only.. :) Flash dump = code.


only dealership/service can supply serial code for this one :(

[fukukum]

No dealer only.. :) Flash dump = code.
which flash bga ?

[oemrepair]

Sure, BGA.




which flash bga ?

[fukukum]

Sure, BGA.
BGA. Have selling programmer

[rafalski]

I will try read this flash with wellon vp990 soon.
Can anybody have dump with known code?

[fukukum]

I will try read this flash with wellon vp990 soon.
Can anybody have dump with known code?

you tell how to read bga flash

[bubik]

send this radio realy blaupunkt service.:roflmao:

[rafalski]

you tell how to read bga flash
you have to desolder the chip, put new balls and read in the adapter to vp990
has anyone tried?
I'm waiting for vp990

[fukukum]

help me:shot::giveup:

[olmar]

Help code
Nissan Micra Bosh Navigation Portugal
Serial number CM0031A9597764
Part number: 7 612 830 031

[raf0468]

Hi all...
i have this radio ..too many attemps have been made with wrong code set is now locked..."please refer to nissan"message appears
now i have obtain original code from nissan but can not enter..
i have been told to leave set powered on after sometime it will let me enter the code...
anyone know any different or how long to leave powered on...
thanks ...

[oemrepair]

how long to leave powered on...


This will NOT help, even left unit powered forever.
Flash IC must be reprogrammed to solve unit lock.

[picia22]

I agree the code is in the OMAP processor

[oemrepair]

You are wrong. Code in flash IC.

[fryderyk 10]

Code in flash GL512.

[zummuz]

Flash IC is BGA.
How did you read it?
You desoldered from the pcb?
Or did you find the traces to the pins?
Thank you very much.

[zummuz]

I thought there is a forum for helping each other, not a cheap bazar where shops try to find customers.
Maybe I was wrong?
Such manners should be reported to moderators.

[oemrepair]

Sure, not cheap bazar. You're right , buddy. So read dump and put it here.

[Rdecode]

Collect ORIGINAL (from dumps, radiopass etc) serial = code examples and send them to me, if you wish to share this info of course...

[sparkle]

hello friends . i need power ups for this unit please . need to test on bench .
can anyone help ?

muchas gracias
sparkle

[mobilart]

No problem..
See image

233195

[CrimSoon]

Read Code with JTAG - box CPT
See This web : Nissan LCN EU OPEL TOUCH & CONNECT SUZUKI Decoder (http://diagcar.eu/en/activations/23-nissan-lcn-eu-opel-touch-connect-suzuki-decoder-activation-for-carprotool.html)

[Faraday]

500euro + jtag 100euro + VAT for one unit- Very cheap unlocking idea.

[CrimSoon]

I think that on public holidays will be some sort of promotion

[Rdecode]

Collect ORIGINAL (from dumps, radiopass etc) serial = code examples and send them to me, if you wish to share this info of course...


need examples serial = code

[mobilart]

CM0129B1963816
7 612 830 129
code is 6305

[jjrp255630]

No problem..
See image

233195


hi, can i use j-link for this jtag? have conections points?

regards

[ahmetusta61]

promlem solved :)

[jjrp255630]

promlem solved :)

you have project for j-link?

regards

ps: i get conection but how i can read and reset code?

regards



ps2: i get this error when read

[ahmetusta61]

i have martech box3 :)

[danielif]

I have project for j-link.

[jjrp255630]

I have project for j-link.



can you share it?



im stuck in this error:


- Connecting via USB to J-Link device 0
- Target interface speed: 8000 kHz (Auto)
- VTarget = 3.401V
- Initializing CPU core (Init sequence) ...
- Initialized successfully
- Target interface speed: 8000 kHz (Auto)
- J-Link found 3 JTAG devices. Core ID: 0x0692602F (ARM9)
- Connected successfully
Reading selected sectors ...
- 1 of 512 sectors selected, 1 range, 0x3F60000 - 0x3F7FFFF
- ERROR: Failed to read memory (0x8000 bytes @ address 0x03F60000)
- ERROR: Failed to read back target memory
Disconnecting ...
- Disconnected

[jjrp255630]

SOLVED.............

[branco]

SOLVED.............

and how did you solve it ?
regards

[urcarpc]

Use 0x02800000...

[bank]

can you share it?
Reading selected sectors ...
- 1 of 512 sectors selected, 1 range, 0x3F60000 - 0x3F7FFFF
- ERROR: Failed to read memory (0x8000 bytes @ address 0x03F60000)
- ERROR: Failed to read back target memory
Disconnecting ...
- Disconnected

Hi!
How did you solve this problem!
I'm also stuck on it

[bargougui]

hi
please i need code radio Nissan
LCN 7 612 830 092
BOSCH CM 0092 E 1110258

[yunuselektronik]

hello
cm0058B4066415
7 612 830 058
code pls

[bargougui]

i need nissan bosch LCN code
hello
i need code nissan LCN EU
7 612 830 092 BOSCH
CM0052 e 1110258

thanks