052012 DAS XENTRY Can't Link startup to Wis Net Standalone

[flterence]

Hi
Dear All

052012 DAS Can't Link startup to Wis Net Standalone on DAS and XENTRY

when i run XENTRY DAS on Simulation , need "F6" Link to Wis Net Standalone

But Can't working fine , will Display " XWSAPI.exe File can't Found "

Any Brother can know how to fix this problem

Need help from all Borther

Best Regards

:flybye:

[shacky]

Hi
Dear All

052012 DAS Can't Link startup to Wis Net Standalone on DAS and XENTRY

when i run XENTRY DAS on Simulation , need "F6" Link to Wis Net Standalone

But Can't working fine , will Display " XWSAPI.exe File can't Found "

Any Brother can know how to fix this problem

Need help from all Borther

Best Regards

:flybye:

Maybe you have not correct installed the ewa folder
Test this again!

[flterence]

Hi

I was reinstall agian the Xentry , but same ,

Now i will load your XWSAPI.exe to XENTRY \ Bin test this

Thank you for your help

Best Regards

[flterence]

Hi Shacky

i was copy the XWSAPI.exe and XWSAPI.ini to XENTRY\ Bin

But still not working !

any Idea ?

Sorry ! Idon't know your mean the 3) Step

Also you have to check Installation Path (EWANET) in GlobalSystemSettings

i have not install EPC net on Laptop

Please help me , if you'r not busy time

Thank you very much

Best Regards

[pesona]

Hi flterence,

same as shacky's suggestion, try to copy this attachment below to the C:\ partition after you extract it.

Hope this help.

[flterence]

Hi

Dear Shacky and Pesona
Thank you for your support First

But i think this error problem is on 05/2012 XENTRY Installed

Because i checked 01/2012 XENTRY \ Bin Folder is with the xwsapi.exe file , But when I installed the 05/2012 XENTRY , The XENTRY \ Bin Folder is miss xwsapi.exe file,

Then i try to loaded the xwsapi.exe ( From 01/2012 ) To 05/2012 XENTRY \ Bin , But still can't Link to Wis net Standalone on DAS

01/2012 DAS is working fine Link to Wis Net Standalone , only 05/2012 is can't Working then

Any Idea ??

Thank you for your mind and Time

Best Regards

[Gusk]

Hello guys mine problem is when i open xentry and click on the left side of WIS icon trying to start wis but doesn't fiinish the procedure, but when i first open WIS from the desktop and then shut it down after that if i start xentry and click on WIS icon it starts normaly.
Has anyone a same problem?

[DB_member]

Because i checked 01/2012 XENTRY \ Bin Folder is with the xwsapi.exe file , But when I installed the 05/2012 XENTRY , The XENTRY \ Bin Folder is miss xwsapi.exe file,

Then i try to loaded the xwsapi.exe ( From 01/2012 ) To 05/2012 XENTRY \ Bin , But still can't Link to Wis net Standalone on DAS

Many folders have changed in 05/2012, the xwsapi.exe file should appear at the xentry\bin\xwsapi folder.

[flterence]

Hi

Thank you for your information

i will check the xwsapi folder

Best Regards

[Gusk]

Thanks DB_member for the solution that worked for me also!!

[flterence]

Hi

Dear All

I checking the XENTRY \ Bin \ xwsapi Folder is with all files

My DAS still can't link to Wis Net Standalone

But XENTRY Can Link to Wis Net Standalone

any Idea ??

Best Regards

[shacky]

Hi

Dear All

I checking the XENTRY \ Bin \ xwsapi Folder is with all files

My DAS still can't link to Wis Net Standalone

But XENTRY Can Link to Wis Net Standalone

any Idea ??

Best Regards

Check your Regedit!!!
To install xentry reg to C2 after install rename it to C4!!!
Cheers Shacky