help to add key Clio 2, with carprog

[pedrodiaz]

Hello,

How I can add key to a Clio 1 with Carprog?
The key it?s RF , and the trasporder U9280M.

Thanks!!

[PierreTheron]

[QUOTE=pedrodiaz;1621207]Hello,

How I can add key to a Clio 2 with Carprog?
The key it?s RF , and the trasporder


U9280M. ------- Clio 1 key...

You ordered key from dealer ??? They are ordered precoded to vin number mate ...

[pedrodiaz]

[QUOTE=pedrodiaz;1621207]Hello,

How I can add key to a Clio 2 with Carprog?
The key it?s RF , and the trasporder


U9280M. ------- Clio 1 key...

You ordered key from dealer ??? They are ordered precoded to vin number mate ...

I have 2 keys, but in one key don't work the RF , don't blink the LED.
I want program the key of other car.
It's possible??
Thanks!!

[isma123]

YES of course

[ninja123]

YES of course

Feel free to explain all here...................

ninja

[pedrodiaz]

YES of course

How do I program the key, please?

Thansk!

[dijo]

With Zedbull

Look:

1- Read 93c46 eeprom and save it to your computer

2- Prepare transponder from eeprom dump. Make sure this transponder starts the car.

3- Create remote programming file and load this file to eeprom.

4- After loading remote programming file to eeprom resolder the eeprom to immo board. Put the immo box back to the car.

5- Click on central locking button of the remote, doors will be locked and unlocked. Hold the button press 4-5 seconds, doors will be locked and unlocked again now release the button check the function of the remote, turn ignition on, immo light will flash and turn inginition off, remove key from ignition.Make sure remote functions are working well.

6- Remove eeprom(93c46) and read it with programmer save the dump to your pc. Put the transponder Zed-BULL antenna, select dump file and create final dump file.

7- Write to final dump file to eeprom(93c46). Resolder eeprom(93c46) to the immo board, put the immo box back to the car.

8- Remove the solenoid on the remote board put the
transponder that you prepared in second step inside the
remote case. Turn ignition on, check transponder function and remote functions. Process has been completed.

PS: Sorry with Carprog i don?t know...

[ninja123]

I think most of us are ok with the side of this setup, but can you explain step 3 in a bit more depth,
ie, where do you create programming file from etc??

Cheers, ninja

[albertros]

Hello,

How I can add key to a Clio 1 with Carprog?
The key it?s RF , and the trasporder U9280M.

Thanks!!


Not possible with car prog

[dijo]

131680
I think most of us are ok with the side of this setup, but can you explain step 3 in a bit more depth,
ie, where do you create programming file from etc??

Cheers, ninja


In zed bull, under advance function you have special feature to program Reno immo I Remotes...

there for you have to walk along this step by step procedure
(Step1,2,3...8)

[PierreTheron]

131680


In zed bull, under advance function you have special feature to program Reno immo I Remotes...

there for you have to walk along this step by step procedure
(Step1,2,3...8)


Yes . You must add that this function is only with Zedbull original .

NOT WITH CLONE ..

[workdamnyou]

YES of course

No, of course

Without the above mentioned grief.

[ninja123]

diji, can you post the adaption file that you create with your zedbull??

I will sift through it and try to make some sense of it so we can all benefit.

Cheers, ninja

[keygargoil]

the file puts the car into a learning state so it can learn the remote id then you need to remove and re read the eeprom and zed bull completes the file, i have heard that carprog has a cable that solders to the remote board and modifies the data in the keys U9280M

[workdamnyou]

i have heard that carprog has a cable that solders to the remote board and modifies the data in the keys U9280M

Only for IR keys mate.

[ninja123]

If I can get before, during, and after dumps, then i should be able to work out how to do this manually, as we all know, these remotes are only available pre coded from stealers :(

ninja

[albertros]

diji, can you post the adaption file that you create with your zedbull??

I will sift through it and try to make some sense of it so we can all benefit.

Cheers, ninja

Hi,
I tried and ended up with :- would work until the first time you switch on the ignition.

Another root could be instal virgin file, change immo line(s) and the remote should self learn. Thats poss what zedbul is doing.

[PierreTheron]

Ninja 123


I can maybe help .

But will only help you on this ..

You will be my guinea pig for it ..


If y6ou got time to spent on this then you can contact me ..

Regards

Pierre

[ninja123]

Thanks pierre, im a little busy for the nest few days, then I will put some time into this, Ill skype you when I get a clio or kangoo to play with.

ninja