Digiprog 3 clone questions and answers

[hcip]

Need more info

Here is some additional...

[bersch8688]

Honda CBR 600 RR 2007 ---> EEPROM 93C56 (L57R) clip work

[bersch8688]

DIGIPROG NEWS !!!!


http://www.youtube.com/watch?v=XtNQmhl2xcE

[PremierD]

I wonder where that came from ... lol

[bersch8688]

Mercedes W203 2002 ---> EEPROM clip 93C86 work

EZS do with R270 HC908 ;-)

[lupu_sandu]

You can do W203 with ST60 (if i remember name correctly) on dash connector.

[hacko12]

DIGIPROG NEWS !!!!



Can you tell us how and what modification you make? Thank you...:top:

[PremierD]

Of course mate .. hang on a bit and someone will post the full process with pictures as well :roflmao:

[hcip]

Here are some more

[hcip]

Thanks PremierD:

My eyes are not good now, maybe I need to retire.... he he he....

[PremierD]

lol lol you're like me .. we will never retire ..

[ohkarol]

how to make ST53 ?

[hcip]

i think this is an old but maybe helpful for some others

[danielboom00]

hi mates,

somebody have manual for 1996 Mercedes SL500 R129,i tought that i had but i can,t find...

thanks in advance

[kiwi1hu]

Hi!

Peugeot 306 VDO cluster diag " no connection"

[jon600x]

is the same as S class W140


hi mates,

somebody have manual for 1996 Mercedes SL500 R129,i tought that i had but i can,t find...

thanks in advance

[diagtech2000]

hi mates,

somebody have manual for 1996 Mercedes SL500 R129,i tought that i had but i can,t find...

thanks in advance
Its got a 16 pin 93c56 if I remember correctly

[diagtech2000]

R129 has 16pin 93c56 if I remember correctly

[dave11674]

hi

dont know if this will help anyone

but here it is

its for st 47
wire colors to pin numbers


1 been white
8 been grey
some leads they look very similar color

dave

[jon600x]

R129
-06.96 installed 93C56 SO Package 14pin
06.96 + installed 93C56 or 93C66 8pin
is correctly

or more simply
-06.96 programming via dash plug
06.96 + programming over 38pin diagnostic connector




R129 has 16pin 93c56 if I remember correctly

[jon600x]

ST47
1 = white
2 = yellow
3 = brown
4 = Blue
5 = green
6 = red
7 = black
8 = gray




hi

its for st 47
wire colors to pin numbers


1 been white
8 been grey
some leads they look very similar color

dave

[Alex_G]

Hello,

Can someone make clear if is possibel to make successfull job on Mercedes W212 (E350 year 2011) with DigiProg3 on OBD2, without can blocker?
There is already many posts about W212, but no clear answer.

What is procedure?
TACHO DIAG
EZS
ASSYST DIAG

Only do EZS and all should be done? also new value in Tacho? Do you have to try more times to make EZS blocked without Can blocker install, becouse if you try to write EZS, DigiProg3 will change km, but after 2 sec km will jump back to old EZS readings. Can be done withot CAN blocker (CAN Gateway)?

Also is safe to use "Assyst diag" funcion with DigiProg 3 on this W212? Same is "Assyst diag" safe to be used on W204?

Thank you very much!!!

Alex_G

[Alex_G]

did many, only with ezs obd

Thank you Tyrone!

So only EZS and must try more than one time if not go?

BR,
Alex_G

[ecupro]

Hello,

Can someone make clear if is possibel to make successfull job on Mercedes W212 (E350 year 2011) with DigiProg3 on OBD2, without can blocker?
There is already many posts about W212, but no clear answer.

What is procedure?
TACHO DIAG
EZS
ASSYST DIAG

Only do EZS and all should be done? also new value in Tacho? Do you have to try more times to make EZS blocked without Can blocker install, becouse if you try to write EZS, DigiProg3 will change km, but after 2 sec km will jump back to old EZS readings. Can be done withot CAN blocker (CAN Gateway)?

Also is safe to use "Assyst diag" funcion with DigiProg 3 on this W212? Same is "Assyst diag" safe to be used on W204?

Thank you very much!!!

Alex_G

Alex I don't have digiprog, but see on my friend which have digiprog he done this w212 but car must be run, I can't remember now real procedure, but if you don't get information I can ask him.

[Alex_G]

Thank you!!! Did you maky Assyst also or only EZS and done?

Thank you!!

[korek515]

I search original flash v 4.82 for my serial D8CCD5070000

[hcip]

I try W212 2011 year today successfully done with ignition ON not running engine

Just connect Plug 16 and select EZS w212
The clock(time) on dash will continously rotate when the digiprog was connected
enter new mileage
you will see the mileage on cluster become 1690986 km, just wait until the cluster will turn off and when it turn on, you will see the new mileage

[hcip]

Hello,

Can someone make clear if is possibel to make successfull job on Mercedes W212 (E350 year 2011) with DigiProg3 on OBD2, without can blocker?
There is already many posts about W212, but no clear answer.

What is procedure?
TACHO DIAG
EZS
ASSYST DIAG

Only do EZS and all should be done? also new value in Tacho? Do you have to try more times to make EZS blocked without Can blocker install, becouse if you try to write EZS, DigiProg3 will change km, but after 2 sec km will jump back to old EZS readings. Can be done withot CAN blocker (CAN Gateway)?

Alex_G

Do the EZS diag, the digiprog will adjust the mileage on EZS (set to 1.6 million KM) and Tacho to new KM
in my case I enter a new value of 40,000 (EZS DIAG) but the mileage show on Tacho 64,000 km
and because digiprog already block communication to EZS and tacho, I repeat the adjustment again using TACHO DIAG to set the correct mileage, I enter 25,400 and the tacho shows 40,000km



Thank you!!! Did you maky Assyst also or only EZS and done?

Thank you!!

yes you can do also assyst, reading the assyst will take some time about 10 minutes

[PremierD]

Do the EZS diag, the digiprog will adjust the mileage on EZS (set to 1.6 million KM) and Tacho to new KM
in my case I enter a new value of 40,000 (EZS DIAG) but the mileage show on Tacho 64,000 km
and because digiprog already block communication to EZS and tacho, I repeat the adjustment again using TACHO DIAG to set the correct mileage, I enter 25,400 and the tacho shows 40,000km

Change the units to kms on your diggy its doing it in miles I think lol

[xtreem]

any test in Bmw 320 2003/04 by obd?

[ecupro]

any test in Bmw 320 2003/04 by obd?

M35080 with OBD? No

[solar]

where to buy good 4.88 updates?someone try gocardiag?

[skens]

hi!
4.88
citroen C-Crosser 2007-2012 93c86 plug 1! ok
regards

[skens]

where to buy good 4.88 updates?someone try gocardiag?
hi
yes,i buy,recomend!
regards

[solar]

uobd2 cant update my digi,because its not from yanhua,
gocardiag still no answer from them,
my sn:E887D8090000

[Cardiag.ru]

uobd2 cant update my digi,because its not from yanhua,
gocardiag still no answer from them,
my sn:E887D8090000
I can update :)

[rukartinatv]

uobd2 cant update my digi,because its not from yanhua,
gocardiag still no answer from them,
my sn:E887D8090000
Cardiag.ru
Good member his update work 100%
not like china
i bought from him long time ago.

[chrismoore02]

I can update :)
To what version?

[hcip]

Diagnostic Head Schematic

[XmoDDeR]

used for?
excuse my ignorance

[hcip]

used for?
excuse my ignorance

Schematic of box in ST16

[digimile]

hi
y not u make device like(dp3(digiprog,smelecom ,enigma and diagprog) that and whole world wait for next update....thanks

[bersch8688]

VW Sharan 2014 ---> OBD Diag Work (use VW T5 2012-Diag)

[solar]

anyone try transit connect 2014 with digi??

[teerak2uk]

anyone try transit connect 2014 with digi??
You could always try and let us know

[solar]

good idea:)try tomorrow.

[RCS]

Does anybody have a problem with touch calibration?
Lately I have an issue starting digi since "OK" area on the lcd is very hard to press... actually to press right...

I takes me forever to start the unit...

Any fixes... as far as I remember calibration in the setup is disabled or not?

Is there any way to calibrate it... or the lcd /touch replacement is only solution...

I want to update it however if I end up with non functioning unit because of the display I am better off buying new updated unit...

Any suggestions?

Thanks

[solar]

try to do transit connect 2014 with digi 4.88 no go...can someone help me with this 24c32.
old 497mls
need 13300-13700mls.thanks

[hcip]

try to do transit connect 2014 with digi 4.88 no go...can someone help me with this 24c32.
old 497mls
need 13300-13700mls.thanks

I think this is not the correct topic for asking help on modifying dump files

[skens]

hi
4.88 , vw caddy 2003-2010 obd, tacho 1min,ecu 10min- ok
regards

[automocion]

hi
4.88 , vw caddy 2003-2010 obd, tacho 1min,ecu 10min- ok
regards

How you do ecu? have an separate option menu or?

Digiprog do edc15 or edc16 on vag?

Regards

[digi men]

EDC15 not go with digivigi only edc16 :)
Today i made audi a4 tdi 2002 tacho ok by obd !

[skens]

How you do ecu? have an separate option menu or?

Digiprog do edc15 or edc16 on vag?

Regards


hi
have a separate option in same menu ,only EDC diagnostic
regards

[werner5395]

VW Golf 6 2012 MM5 Digi no work

[sondurum]

my digiprog 4.88 works but only more milage writing. miles not drop.Why do you think?

[bodzio012]

Fabia 2009 work ok by 4.85

[javyb]

my digiprog 4.88 works but only more milage writing. miles not drop.Why do you think?
Bad update. Checksum not cracked on update properly

[hcip]

2013 year Camaro with 24C32 eeprom in BCM doesnt go in OBD, (ACCESS DENIED)

[honingkoning]

Smart forfour dash through diag, it connects good, reads good pn but reads wrong milleage.

Wbr Adam.

[tom0077]

alfa romeo 156 plug st 33 no work

[sosmecano]

bmw E90 2007 cas 3 via obd no conection

[teerak2uk]

bmw E90 2007 cas 3 via obd no conection
If no connection with cas3 or cas3+ use r260

[skens]

hi
4.88
peugeot 4007 c86 plug1 ok
regards

[softpoirl]

Mazda 3 2015 can be done by obd2 with this tool? Someone already tried? Thanks

[jmcartec]

Mazda 3 2015 can be done by obd2 with this tool? Someone already tried? Thanks

Sure about 2015?

[javyb]

Mazda 3 2015 can be done by obd2 with this tool? Someone already tried? Thanks
No chance maybe in dreamland

[digimile]

hi
tool clone date 2011 or 12 and you need 2015 over obd2......great.....

[chrismoore02]

Sure about 2015?
Perhaps he's Marty McFly but going into the future ;)

[softpoirl]

Sorry maybe when i said 2015 was wrong, I refer to Mazda3 Third Generation, that in my country is being sold as 2015model

thanks :) 274013

[atesbocusu]

2013 w204 c class i write 50x and he say 300 x and not change 4.85 wers

2008 Q7 i write 70x write 333xxx i try more time and later ok but not good km write

2009 Q7 uknow tacho not ok

i try 2008 Mercedes Ml series and same faulty i write 80x write 300+xx i try more km and ok later and all car start now i dont want try ^^ i have orjinal avdi and same mor problem

[javyb]

2013 w204 c class i write 50x and he say 300 x and not change 4.85 wers

2008 Q7 i write 70x write 333xxx i try more time and later ok but not good km write

2009 Q7 uknow tacho not ok

i try 2008 Mercedes Ml series and same faulty i write 80x write 300+xx i try more km and ok later and all car start now i dont want try ^^ i have orjinal avdi and same mor problem
U have a bad update mate. That's why it writes more mileage.

[sosmecano]

someone test digiprog in pegeaut 3008 ??? witch plog can do it ???

[sosmecano]

tested to day mercedes w211 2005 OBD NO CONNECTION
SEAT LEAON FR 2007 OBD NO CONNECTION
FIAT DOBLO 2011 OBD NO CONNECTION
FORD C MAX 2010 OBD NO CONECTION
PROBABLY IHAVE PROBLEM IN MY DIGIPROG V 4.88 FROM yanhua SAMONE CONFIRM PLEASE

[88diablo]

Sounds like connection problem.

[sosmecano]

Sounds like connection problem.
how to fix the problem????

[honingkoning]

tested to day mercedes w211 2005 OBD NO CONNECTION
SEAT LEAON FR 2007 OBD NO CONNECTION
FIAT DOBLO 2011 OBD NO CONNECTION
FORD C MAX 2010 OBD NO CONECTION
PROBABLY IHAVE PROBLEM IN MY DIGIPROG V 4.88 FROM yanhua SAMONE CONFIRM PLEASE

Check your cable first, replace connector.

Wbr Adam.

[overs0ull]

Tested today opel corsa C 1.3cdti - digiprog make it from the first time with ,odometer reset buton pushing .
Don't read old km but write the new one for 30sec. . After that baterry disconect for 30-60 sec and all fine.

[spider-wifi]

does anyone have the pinout of the Golf 3 VDO/MM connector (28 PIN) to dash?
The cable which was with my digi is missing this connector (only mercedes C class adaptor is attached.

br
Anyone has the correct pinout? Golf3 VDO / MM does not work

this is worng
ST 9+15 AMP1-963553-1(24pin) 191972530B(28pin)
yellow 4 13
R-10k 9
green 10 7
white 10 2
brown 13 5
brown 13 9
brown 13 1
yellow+R 14 4
green 15 3
white 25 1
white 25 13
grey 25 17


BR

[Melectronic]

Can someone have working pinout for ST47 cable?

Thanks in advance!

[xtech]

v 4,82 audi q7 2008 obd ok

[Repinator]

Today I have a customer with 2009 Q7 DSG but can not find the menu (digiprog v4.88) option for correcting km Audi DSG
Do you have any idea?
Thanks

[adrian1914]

Today I have a customer with 2009 Q7 DSG but can not find the menu (digiprog v4.88) option for correcting km Audi DSG
Do you have any idea?
Thanks
Yes. Use vcds and reset to 0

[digi men]

YH 4.88 Vw cady 2007 tacho+ecu by obd ok !

[armen777]

Hello.Bought digiprog3.Turn after 5 minutes regulator LM317 gets very hot,and digiprog off.replaced LM317 but does not help.Can you help? Need good quality photos that could be seen SMD.
Thank you.

[solar]

2009 w221 only with can blocker?or is some other way with digi?

[lupu_sandu]

For 221 only with can blocker.

[teerak2uk]

Hello.Bought digiprog3.Turn after 5 minutes regulator LM317 gets very hot,and digiprog off.replaced LM317 but does not help.Can you help? Need good quality photos that could be seen SMD.
Thank you.
Return to seller

[Repinator]

Hi
Jeep Wrangler 2011 by OBD ok 3min

[digi men]

YH 4.88
AUDI A4 2008 OBD OK 15-20 MIN
AUDI A6 2011 OBD OK 15-20 MIN
PASSAT NEW MODEL 2011 OBD OK
TOURAN NEW MODEL COLORED TACHO 2011 OBD OK
FIAT BRAVO 2011 TACHO OBD OK

[chrismoore02]

Peugeot 307

Dash - NEC

BSI - HC12

YH 4.88, no need to do dash, only BSI is needed :)

* chinese red nec programmer will not do this dash, about to return to customer, plug in dash, mileage taken from bsi lol
Was the mileage going up or down

[digi men]

Hy guys, its going whit YH 4.88 audi a6 2012 new model 95320 eeprom prepare or not ?

[Repinator]

YH 4.88
Fiesta 2011 by OBD ok 2min

[cheester]

Hy guys, its going whit YH 4.88 audi a6 2012 new model 95320 eeprom prepare or not ?

Im also interesting, can someone tested?

[88diablo]

Im also interesting, can someone tested?

Ive done a couple straight OBD with 4.82, about 15 mins. Think they were 2012 but may of been 2011 though. Just try and see.

[vageric]

Ive done a couple straight OBD with 4.82, about 15 mins. Think they were 2012 but may of been 2011 though. Just try and see.

they are talking about the new shape one like the A8.
you have done the old shape one through obd.
by the new one not possible only through obd. have to prepare eprom.

[MERCO86]

Fiat 500 year 2008 obd ok 2min

Envoy? de mon C6603 en utilisant Tapatalk

[digi men]

Yes i ask for the new model, if someone was able to do whit the yh 4.88 or not :joyous:
the old i know, i have done 2011 by obd, but iam intrested if it work in this one !

[Gregor30]

4.88 Vw Up 2013 tacho by obd (after reconnect ignition) Ok !

[vageric]

Yes i ask for the new model, if someone was able to do whit the yh 4.88 or not :joyous:
the old i know, i have done 2011 by obd, but iam intrested if it work in this one !

by the looks if it because there is no response on your question i think there is only one outcome
and that is try and see.

[drkyra]

yes, will A6 2012 with eprom prepair work.

[digi men]

Have you try it self from experiance, or you say because its in pdf ?

[wadim21]

work with VW Tuareg after 2010?

[digi men]

Today i try Audi A4 2007 1.9tdi TACHO OK BY OBD ECU EDC16 I HAVE TRY UNDER VW PASSAT, IT READ CORECT KM THAN 10MIN READING AND NOT CHANGE, STILL OLD KM , SO NOT WORKING BY OBD THE AUDI EDC16 I THINK, OR SOMEONE WAS ABLE TO DI IT ?
On caddy,passat,touran edc16 it work without problem , thats strange !

[XmoDDeR]

work with VW Tuareg after 2010?

its eprom and obd

[drkyra]

no experiance, till now all Audi VW Skoda...works with OBD only. But all what Digiprog says in PDF works for me. The steps are all in DPIII menu as written in manual.
I only have problems with EDC 15+16. I always use cheap supervag k+can 2 for edc16, and for erasing errors always VCDS.

[Repinator]

Anyone tested A4 (facelift) 2012 dashboard with digi?

[cheester]

Hallo there!
Audi a6 2013 do u have to prepare eeprom or u can do it only with obd?
Thanx for your reply by the way audi a5 2010 with dp 4,88 10 minutes.

New model a6 can not be done just by OBD, i tried today a6 2012 with Digiprog 4.82 and no success.
Before read eeprom digi read good mileage by OBD, after eeprom modification put clock back and got DEF on lcd and digi read cosmic mileage.
When write back ori file all back to normal.....
I think Digi doesnt write eeprom in ''service mode'', maybe some one can modify my original file??
By Digi manual after eeprom modification should be 0mls on lcd ...............but I got DEF

P.S. When taking clock out be carefull on very thin plastics around, very easy to break something :)

[adrian1914]

Hello. Anyone know how to do milage in Bmw X1 2013?

[hcwc]

works with a4 2012 ?

[TRISIEN]

hi kia picanto 2010 mcu with Digiprog solution

[TRISIEN]

soulection 307 2002 NEC thank you Digiprog 4.88

[electrohicham]

4.88 audi a3 2011 color tft obd ok.

[electrohicham]

non yh 4.88
caddy 2010 dash + ecu obd ok
w212 obd ok need regeneration fap after odo change .
polo 2011 odo not ok obd but after second try ok .
w204 2012 obd ok .
focus 2007 to 2010 obd ok
focus 2011 obd not connect but 95320 ok .
jumper boxer 2010 obd ok
renault laguna 2011 not ok no 95080 abs in menu.
fluence with dash with 95160 cant not in menu.
golf6 2012 obd ok.
passat 2008 to 2011 tested obd ok .
renault megane laguna with tacho 24c16 and abs 95160 ok .
x5 with st47 ok .
ford cmax 2010 obd ok.

[PremierD]

So all in all a pretty decent tool then mate ?..............lol

[electrohicham]

hi kia picanto 2010 mcu with Digiprog solution
kia 2010 is with 93c56 use tashosoft in adress 060 , didnt test with digi .

[electrohicham]

So all in all a pretty decent tool then mate ?..............lol
im been surprised 2 all good for a non yh one , i got it first with 4.82 update it to 4.88 dump didnt calc ok after get it back to 4.82 use dump in forum to update to 4.85 and after to 4.88 also in forum still work good .

[rukartinatv]

Bmw x1 is 35080 with repsoft eraser cas with r270 job done ews and keys wil follow
Cas and dash you did right. Ews and keys:) i love this:)
dont forget front and read sam:)

[adrian1914]

Do you have schematic for this. A specially ews and key

[88diablo]

Maybe he cant find the link to download brain.exe yet

[adrian1914]

Maybe he cant find the link to download brain.exe yet
I feel sorry for U.

[electrohicham]

not all good mate :) you are yet to try few that non yanhua will not do
like what ? i use this toy about one year now !

[digi men]

Renault master dash eeprom 93c66, change km ok by st1 !
YH 4.85

[electrohicham]

only 1 year lol what cars u have done??
im in car busness since 2003 bro !!

[vageric]

im in car busness since 2003 bro !!

he dont ask what car from when you have started
but what car since you are useing the digiprog3 ( quote: i use this toy about one year now !)

[adrian1914]

Yes with tachosoft eraser and r270 the new value wil be written automaticly in ews and keys i checkd one my self by going to the dealer
You use tachosoft eraser for clear m35080 or for calculating new value? I newer heard about tachosoft eraser.

[Faraday]

Lupo 2003 (motometer) OBD doesn't read km shows 0. Did it manually 24c02

[honingkoning]

Lupo 2003 (motometer) OBD doesn't read km shows 0. Did it manually 24c02

Just write through diag it works, tested by my self.

[sepistar]

Just write through diag it works, tested by my self.

it works,obd no problem.
br.

[skens]

hi
4.88
Renault kangoo dash eeprom 93c76, menu master ST1 change read and write km ok
regards

[shirokov]

NIce conclusion gwee i khew That, what i asked is is there some body who has cheked the values with MB STAR after correction with the DIGIPROG 3 de DIARGPROG 3 ELPROSYS is ok has been cheked before, every body is saying that the digiprog 3 flash 999999 and 1.6 million but have actually somebody see that on the MB Star thats the questions.

MB W212 2010 year EZS after Digiprog 3:

[khans]

Hi.
i have to do a MB C Class 2006 through digi pro clone .hw to change the mileage kindly post ur experience .
thanks.

[DARFVADER]

MB W212 2010 year EZS after Digiprog 3:
:stoned::stoned::stoned::stoned::stoned:
Its at this point the mercedes dealer produces a "digiprog" and asks you if youve seen one of these before !

[Repinator]

Today I tried a 2011 Passat and asked me to remove the fuse
know what fuse should be removed?

[digi men]

Disconect the battery, put back, and you done :top:

[Repinator]

Disconect the battery, put back, and you done :top:
this happens before introducing new value :(

[digi men]

I hade the same problem, and have than do again all and it was ok than ;)

[Bluueelfer]

Hello, I am looking for pin assignment for st25 Scorpio, has anyone?

[AudiS4]

Does the clone works on all the car on the list?or not really?



Sent from my iPad using Tapatalk

[88diablo]

Works on everything, even works on things not in list like space shuttle Colombia fine. Some results may not be to customers full expectations though. :joyous:

[drpeter]

MB W212 2010 year EZS after Digiprog 3:Sent it back to china for warranty.

[shirokov]

Sent it back to china for warranty.

I know that the Digiprog does just that. :D I answered the question and show what happens. :)

[Repinator]

Today I tried a 2011 Passat and asked me to remove the fuse
know what fuse should be removed?
Solved280202

[teerak2uk]

Does the clone works on all the car on the list?or not really?



Sent from my iPad using Tapatalk
No but it you search this thread you can see what has and has not worked

[wadim21]

Vw touran 2011 with colour displey not work.V 4.88

[MERCO86]

It is possible to block communication between the EZS and the dash of a mercedes w203 year 2002 with st 60 ?

[MERCO86]

Sorry ST 49, not ST 60.

[twincam]

Yes You can do it with st60 also and better to do it on the table with good power supply to digi.

[gjuzel]

digiprog (clone) plug 29 shematic

[digi men]

ST 29 AMP964825
yellow 9 yellow
green 10 green
brown 13 brown 17
white 25 - 1
yellow 25 - 2

[zckariya70]

Hello friends in DIGIPRO III for laura ,vw,polo these kinds of odometer having 24c32 eeprom ic but i cant change the milege directly i dont know y if i remove the eeprom ic and reset the service data then i can do easily change the reading can any one help me how to do these kind of eeproms and how to clear the service data

[AudiS4]

Hello all I just got my digiprog III clone so far the clone is good however it has intermittent no connection issue?How to solve this issue?change serial plug on cable?on digiprog also?The other issue I am having is that the digiprog does not show old mileage when reading cluster it just shows ? .The crypto 2003 a4 I did today read old mileage but the other 2 cars it did not.the other 2 cars were a 2000 Audi s4 and 2003 vw passat.Anyone know to to fix this?Also there is no auto detect?Will the 4.88 update fix the issues I'm having?


Sent from my iPad using Tapatalk

[autocargo]

On some cars digi will not show mileage... that's the way it's been made.

[AudiS4]

I see well that makes the tool not that good cause you don't really know lf it's safe to adjust mileage?Does the digiprog have any failsafes?To prevent dead dashboards?Also it does not have auto detect like TU2008

[betrescudan]

I see well that makes the tool not that good cause you don't really know lf it's safe to adjust mileage?Does the digiprog have any failsafes?To prevent dead dashboards?Also it does not have auto detect like TU2008
stay out of obd with this tool...many damaged dashboard until present...use a prof tool for obd like x-tool,enigma,superprog,abritus

[sepistar]

the tool are not bad at all,
most of problems are user related (not read entire instruction,wrong adapter selected etc.)
br.

[AudiS4]

This tool came with no instructions can they be downloaded somewhere online?

[PremierD]

Search this thread .. coz they are on here :banghead:

[honingkoning]

stay out of obd with this tool...many damaged dashboard until present...use a prof tool for obd like x-tool,enigma,superprog,abritus

You Call X-tool a pro tool!!!!!!

[zckariya70]

can we change odometer reading in vw and rapid with digipro 24c32 eeprom how to do in digipro can any one help me

[TRISIEN]

today I change w204 220 cdi 2009 with the EZS it works digiprog4.88

[honingkoning]

today I change w204 220 cdi 2009 with the EZS it works digiprog4.88

This topic sometimes feels like the movie ground hog day,
This is at least mentioned 50 times.

Wbr Adam.

[AudiS4]

Is it safe to update digiprog III clone to 4.88 using files that come with it or will it make the unit useless?

[diagtech]

For money just buy one new 1 job will pay for it

[gjuzel]

update digi v4.86 to 4.93 list txt

[DARFVADER]

For money just buy one new 1 job will pay for itWhere you get this digiprog for a fiver ?

[88diablo]

Where you get this digiprog for a fiver ?

Bought it for a fiver from the guy at the back of the car wash. You know, the car wash where the ........... (Insert word of coice) do mk4 Golfs and odd Corsa C for ?5 then when get brave and try to do BMW in circuit and fry tings blame machine so sell it quick. :-)

[skens]

hi
4.88
škoda superb 2008- 3T diagnostic ok
regards

[magdex]

Today I made CLS W218 2011 Working 100% EZS , DASH,and Getaway in EZS Km stored 16883432 :) And all works OK !

[Repinator]

Zafira 2012
I will get this car one of next days, this is 2012 y,My question is in what place are stored km ?
posibible with Digiprog by OBD?

[88diablo]

Today I made CLS W218 2011 Working 100% EZS , DASH,and Getaway in EZS Km stored 16883432 :) And all works OK !

Wow nearly 17 million, you must have new update as I can only get mine to make it show up to 1.6 million ish....

[PremierD]

:roflmao:......................................

[hcip]

Wow nearly 17 million, you must have new update as I can only get mine to make it show up to 1.6 million ish....


I have a Volume of laugh in your comment, more than 17 million KILOS of laugh!!!!

[7936]

I read 10 pages and this is way off topics, buy a new clone, without cables less than 200 us. Unless you do car for 25 to 50 and make it bad on people who pay good money know what their doing and mad because you need to remove eeproms from socket to programm

[amine007]

HELLO This Please I will demonde someone has already tested to volvo xc 60 2010 with a Digiprog thunkssssssssssssss

[javyb]

HELLO This Please I will demonde someone has already tested to volvo xc 60 2010 with a Digiprog thunkssssssssssssss

don't bother it will not do job proper and also puts mileage tampered fault in CEM, and you may encounter starting problems later

[amine007]

thanks for what this car can do in

[javyb]

thanks for what this car can do in
SMOK tool, Diagorog 3, X-Tool

[digimile]

hi
after too much negative comments about x-tool it has some ray of shine.....thanks

[Repinator]

Hallo good fellaz,

im gone do a saab 93 2008 soon with digiwigi , does it work with de st 48

thnx for your replyes ..............



Saab 93 mc9s12h128 ST 48 R/W OK

[MERCO86]

with V4.85
Dodge nitro 2008 change mileage and clear error ok by obd
Ford mondeo 2001 OK by st 51.

[michalez]

Digiprog 4,88 will do new citroen c4 from 2011?

[Repinator]

Digiprog 4,88 will do new citroen c4 from 2011?

NO...........

[michalez]

NO...........
dashboard works using citroen ds4 tacho but bsi didnt check. Maybe also works (c4=ds4)

[teerak2uk]

thanks for what this car can do in
Smok tool probably

[michalez]

update for 590C8F0E0000 4.88
Tested by myself

[michalez]

Citroen C4 (b7) Version from 2010- up Digiprog 4.88
DASH OK ( Citroen Ds4 24c16 option)
BSI OK ( PEUGEOT 508 Bsi)

[djollie]

hi
can a berlingo 2011 be done?..is it obd or otherwise?
thanks
dj

[vageric]

hi
can a berlingo 2011 be done?..is it obd or otherwise?
thanks
dj

yes can be done and no not obd.

[buga37]

update for 590C8F0E0000 4.88
Tested by myself

good job, sharing my files :congrats:

[michalez]

good job, sharing my files :congrats:
Ty, If it is your files share newest version if you are soooo good

[PremierD]

Ty, If it is your files share newest version if you are soooo good

Why don't you buy the update mate ?????.. then come on and share it ... and have the serial banned from future updates :)

Only if you are soooooo good that is :banghead:

[skens]

hi
4.88
vw passat B7 tip 3c 2012 color display use meni passat B6 tip 3c /color display read km ,write km, diag.ok
regards

[michalez]

i didnt get update from buga37. I get this from china seller. I shared many things that i bought. I heard many times that this serial is already banned so it is not truth. They dont want make update files for this becuose there are too many people with this SN. If you have problem just delete my post with update


Why don't you buy the update mate ?????.. then come on and share it ... and have the serial banned from future updates :)

Only if you are soooooo good that is :banghead:

[skens]

hi
4.88
BMW - 1 Series (E81/E82/E87/E88) - CAS 3 DIAG. OBD- ST16 ,5 min
regards

[michalez]

ooookkkk en de dash 35080 ? how did you do it??? or was it already prepared en you put it when de digiwigi asked you so !!!!!!

35080 need to read and then need to erease with other tool or buy new eeprom

[skens]

35080 need to read and then need to erease with other tool or buy new eeprom


hi
yes
regards
(http://www.digital-kaos.co.uk/forums/members/399307-terios/),Terios read manual

Bauen Sie das Kombiinstrument aus
Dismantle Kombi Meter
Programmieren Sie dieses gem?? der separaten Anleitung
Program this according to the separate instructions
Legen Sie das programmierte Kombiinstrument in Reichweite
Place the programmed instrument in range
Noch nicht anschlie?en / Do not connect
CAS Programmierung / CAS programming
Im Fahrerraum befindet sich der Diagnoseanschluss
Diagnosis connection is located in the cabin
Diagnoseport an Stecker 16 anschlie?en
Connect Diagnosis Port with Plug 16
Z?ndung auf an / Ignition on
DigiProg ?ber Stecker 16 anschlie?en
Connect DigiProg about Plug 16
Programm w?hlen / Choose program
PKW / LKW?BMW?
Und dann je nach Modell / and then depending on the model
> 1(E87)-CAS 3 Diag
> 3(E90-93)-CAS 3 Diag
> 5 (E60-E61)-CAS 3 Diag
> 6 (E63-E64)-CAS 3 Diag
Display Anzeige best?tigen / Confirm Display
Achten Sie auf das Display vom DigiProg
Look for the DigiProg Display
Wenn die Meldung IKE einbauen erscheint, bauen Sie innerhalb
von 60 Sekunden das Kombiinstrument ein
When the IKE message appears install the Kombi Meter
within 60 seconds
Timer startet / Timer starts ( 110?0 )
Das Kombiinstrument zeigt den aktuellen KM Stand an
The actual KM value is shown
Reparatur / Bedienungsanleitung / Manual
www.tacho.de
Ger?t / apparatus : DigiProg
Stecker / Plug : 16
BMW
1 / 3 / 5 / 6
1?E81 / E82 / E87 / E88
3?E90 / E91 / E92 / E93
5?E60 / E61
6?E63 / E64

[TRISIEN]

hi my friends I have mercedes vito 2007, I do like the photo
4.88 Digiprog read errore
help me another solution
I aka400 the Programme -carprog -xprogm-willem-upa
sorry my english

[TRISIEN]

d?sol? ici photo ezs problem

[skens]

hi
4.88
citroen jumper -2007 diag ok
regards

[sepistar]

have you already try on car?
works fine?
br.

[puiu]

updated to 4.92 today :)

100 euro

by cardiag.ru :)

How can i contact cardiag.ru ?

thanks

Puiu

[Cardiag.ru]

How can i contact cardiag.ru ?

thanks

Puiu
who looks for - that will find :)

[puiu]

who looks for - that will find :)

Hi :)

you have pm

[bersch8688]

Digiprog updated 4.88 ---> 4.92

By Cardiag

Update work Perfect

[puiu]

Thank you Cardiag ,V4.92
all perfect ! [emoji106]


Sent from my iPhone using Tapatalk

[javyb]

hi my friends I have mercedes vito 2007, I do like the photo
4.88 Digiprog read errore
help me another solution
I aka400 the Programme -carprog -xprogm-willem-upa
sorry my english
Digi will not read hc08 processor

[PremierD]

Correct
... but
but
but
if you have a word with the updater .. he may be able to sort that for you :)

[jon600x]

Thankyou Cardiag for upd V4.92
everything is correct and perfect :top:


thanks also on gwee

[Cardiag.ru]

For update, your digi must be not banned
BANNED:
59 0C 8F 0E 00 00
24 CC 65 07 00 00
0A CA 8F 0E 00 00
AF D6 8C 07 00 00
FA 9C 60 16 00 00
1B D7 10 12 00 00
sn must be not banned and sn must ends on 0000.
Also, your digi must be recognized by PC when connecting USB.

[rukartinatv]

I know i buy from him all updates for digiprog
work 100%
all updates v4.92 who sell they copy from Victor.

[PremierD]

No one .. if there are smart ... :)

[michalez]

so we are waiting for update for 59 0C 8F 0E 00 00
and yes before already they said that this sn is banned :D

For update, your digi must be not banned
BANNED:
59 0C 8F 0E 00 00
24 CC 65 07 00 00
0A CA 8F 0E 00 00
AF D6 8C 07 00 00
FA 9C 60 16 00 00
1B D7 10 12 00 00
sn must be not banned and sn must ends on 0000.
Also, your digi must be recognized by PC when connecting USB.

[Repinator]

who looks for - that will find :)


I tried to send you a PM but do not have space :)
How can I contact you?

[captain crackers]

Cardiag.ru. Please clear your private messages, your mailbox is full. Arthur.

[Cardiag.ru]

Sorry guys, PM was full :)
You can contact with me in Skype for faster updates.

[chrismoore02]

Gwee why not pull dash and read manually 1st so you have a backup.

[jon600x]

touareg 2013 via obd work with v4.92
v4.88 no work, unknown version

phaeton 2014 via obd work with v.492
v4.88 no work, unknown version

[PremierD]

So it was not worth the update then ??????... :roflmao:

[TULGEYWOODMAN]

Digi will not read hc08 processor

Is your upa broke then?

[javyb]

Is your upa broke then?
No. Was letting the guy who asked question know. Anyway my digi works on hc08 [emoji38]

[Cardiag.ru]

Anyway my digi works on hc08 [emoji38]
You foreget tell who make it works ;)

Any Digi clone can start work with HC08 and HC05 and ST53 dongle after modification. If you can use solder pen, you can make it itself.
Problem is only shipment time from me to you.

[javyb]

Oh yes obviously cardiag.ru the digiprog mastermind

[dashradio]

Thought selling was banned on this forum ?

[TULGEYWOODMAN]

Thought selling was banned on this forum ?

Well I was going to suggest that selling could be allowed if it was sent to another link.
Example
I have got a dogs feeding bowl for sale
Please see link..........be it ebay or the Liverpool Echo

Then dk has nothing to do with the sale or the ad.

WHAT DO YOU THINK?

This would enable members to sell stuff surplus to requirements and give dk members first shout.

[justy22]

Can digiprog 3 clone do cas 2 and 3 via plug

[teerak2uk]

Can digiprog 3 clone do cas 2 and 3 via plug
Yes it can do some

[ikara]

You foreget tell who make it works ;)

Any Digi clone can start work with HC08 and HC05 and ST53 dongle after modification. If you can use solder pen, you can make it itself.
Problem is only shipment time from me to you.
what modifications,original digi not work HC08 W203 EZS,some work and some not,what with baned device,

[ikara]

If device is baned must i buy new one?

[teerak2uk]

If device is baned must i buy new one?
Yes if you want it updated

[TULGEYWOODMAN]

You foreget tell who make it works ;)

Any Digi clone can start work with HC08 and HC05 and ST53 dongle after modification. If you can use solder pen, you can make it itself.
Problem is only shipment time from me to you.

Thankyou for update.:top:

[PremierD]

Two updates ... or a double post Eric ? lol

[Kykv]

Can someone PM me where to buy DP3 with SN able for updates. Thanks

[TULGEYWOODMAN]

Two updates ... or a double post Eric ? lol

Owld age,Owld age................

[honingkoning]

hallo fellaz

i get today a E36 2005 tryed with a YH 4.88 with st 16 cas 3 diag he gives SW and HW number after a while he gives unknown version i have been told it works starting with 2006 models . is it correct ?

Thnx every info is welkom !!

I would say 2005 is still cas 2.
Did you remove cas?

[ikara]

all Yanhua Digiprog3 can be updated
My is YH but baned sn as Cardiag said,how update this sn

[PremierD]

My is YH but baned sn as Cardiag said,how update this sn

And where pray tell me did you get your last update ?

[ikara]

And where pray tell me did you get your last update ?
I bought it with 4.82 and update to 4.88,update get from here if i remember corect

[PremierD]

Then that is your problem .. :) .. someone has bought an update .. and then posted it here your serial matched so you used it .. now if you get your's updated to 4.92 .. I assume that you may then post that file .. for someone else with the same serial to get ... Just a wild guess here but I would say that's why some numbers are banned

[ikara]

i understand all what you say,but is possible update my device or not,in one post i read "baned not possible",other post "all YH can be update",what is the true

[PremierD]

Well mate .. Its not I who is updating them .. so I don't really know .. :) (just use some common sense )

[88diablo]

Well mate .. Its not I who is updating them .. so I don't really know .. :) (just use some common sense )

Where can I find download for "common sense" please....:peaceful:

[Johnner]

Aw Jesus,please don't start another avalanche with commonsense.exe !!

[PremierD]

I'll nip it in the bud should it occur :)

[88diablo]

I'll nip it in the bud should it occur :)

Sorry, just couldnt resist. No more promise.

[ikara]

24CC65070000

[teerak2uk]

These are banned serials

59 0C 8F 0E 00 00
24 CC 65 07 00 00
0A CA 8F 0E 00 00
AF D6 8C 07 00 00
FA 9C 60 16 00 00
1B D7 10 12 00 00

[teerak2uk]

Hallo Guys!
i bought recently a program ecu safe 2.0.0. it can do a lot of things immo off ect ect.. for the ommo i understand it would be eeprom reading but for de dpf for example do you need a seperate interface to read dpf or is it located in the same eeprom as the immo

Thnx

?...?..............deleted double post.....................

[teerak2uk]

Hallo Guys!
i bought recently a program ecu safe 2.0.0. it can do a lot of things immo off ect ect.. for the ommo i understand it would be eeprom reading but for de dpf for example do you need a seperate interface to read dpf or is it located in the same eeprom as the immo

Thnx
You were ripped off program is readily available for free if you search the net as for your question ask in the tuning section

[u.s]

another one here updated to 4.92. Thanks Cardiag.
has anyone got the updated/new pdfs that cover this release?

cheers

[beti88]

Hi there

I want to ask if somebody have made an txt file or word document with all the cars people have done with digiprog? :tears_of_joy:

Regards, Beti 88