View Full Version : Digiprog 3 clone questions and answers
88diablo
5th March, 2013, 08:11 PM
Porsche Cayenne 2005 Read & Write - OK
olegario
5th March, 2013, 08:52 PM
Citroen C5 2006 dash 0L40X not work with cable 42 , got "init error"
angelcom
6th March, 2013, 04:59 AM
hi,
yes read and write with soic clip
Poms
6th March, 2013, 09:20 AM
hi,
yes read and write with soic clip
Ok thank you for your answer.
teerak2uk
8th March, 2013, 05:25 PM
XyD5ciKlW04
sepistar
8th March, 2013, 06:59 PM
A6 3.0 tdi 2006 dash OK
Edc 16 Not OK.
regards
nebojsapejcic
9th March, 2013, 03:20 AM
Anyone tried seat leon 2012? I have one coming...
mezindaniel
9th March, 2013, 06:17 AM
Audi A4 2011 obd OK
Vw Caddy 2007 OBD OK
Opel Corsa 2004 OBD OK
Opel Meriva 2007 OBD OK
teerak2uk
9th March, 2013, 11:38 AM
Anyone tried seat leon 2012? I have one coming...
been reported as ok on 2012 Passat so prob be ok but only one way to find out
nebojsapejcic
9th March, 2013, 05:56 PM
been reported as ok on 2012 Passat so prob be ok but only one way to find out
Is it safe if I take out dash and read/save only eprom file. Will that get me out of trouble if something goes blue?
javyb
9th March, 2013, 06:56 PM
Is it safe if I take out dash and read/save only eprom file. Will that get me out of trouble if something goes blue?
Why is it gonna go blue???
TULGEYWOODMAN
9th March, 2013, 07:01 PM
Why is it gonna go blue???
Chelsea supporter?
teerak2uk
9th March, 2013, 08:15 PM
Aussie saying?
TULGEYWOODMAN
10th March, 2013, 10:51 AM
Aussie saying?
man city supporter then.
g`day
deany
10th March, 2013, 05:33 PM
Mk4 golf obd ok
Mk5 golf obd ok
2010 passat ok
2006 a3 ok
2009 a4 ok
sepistar
11th March, 2013, 12:25 PM
Passat B5 year2000 vdo,no connection.
But under golf menu are OK.
regards
teerak2uk
11th March, 2013, 02:40 PM
New Volvo goes by OBD tried and tested
on which models as i`m curious if this will do a 2012 XC90 or are the same as 2008?
javyb
11th March, 2013, 03:01 PM
on which models as i`m curious if this will do a 2012 XC90 or are the same as 2008?
I think the 2012 models are different to correct mileage on via OBD
dyc
11th March, 2013, 03:07 PM
on which models as i`m curious if this will do a 2012 XC90 or are the same as 2008?
i made s80 late 2011 milage ok on cluster but fault about mileage tampering in cluster instrument remain
justy22
11th March, 2013, 03:15 PM
man city supporter then.
g`day
Eric, i found this link below is it really you that stars in it
Full Moon - YouTube
TULGEYWOODMAN
11th March, 2013, 03:33 PM
Eric, i found this link below is it really you that stars in it
Full Moon - YouTube (http://www.youtube.com/watch?v=H2lfRvIKZTU)
luvly jubbly.
I was a perfectly normal person before becoming involved with motor car dashboards
justy22
11th March, 2013, 06:47 PM
luvly jubbly.
I was a perfectly normal person before becoming involved with motor car dashboards
Thats why im not going hill walking with you all it takes is a full moon and the whole party is fckd
the hammer films on you tube are superb full episodes full moon is a classic
TULGEYWOODMAN
11th March, 2013, 07:00 PM
Thats why im not going hill walking with you all it takes is a full moon and the whole party is fckd
the hammer films on you tube are superb full episodes full moon is a classic
I was up Snowdon yesterday. luvly cool breeze blowing.
butties where a bit frozen:laugh:
Shmortz
11th March, 2013, 10:11 PM
Hi guys, I got my clone with cables other than those of the images in the manuals, almost I'm sure most of them are not correct, is there some schemes of the cables so I can check them?
solar
11th March, 2013, 10:49 PM
did 2008 transporter,
old mileage show ????,enter new OK
try ecu,read OK,write OK(take 10min) but still old mileage.
later done ecu with bluevag in couple minutes.
dyc
12th March, 2013, 07:18 AM
mercedes w221 2007 cluster ok assyst ok
mercedes w164 2006 cluter ok assyst ok
astra 2010 cluster ok
bmw e60 cas by cluster plug km changed in wrong adress and red dot on cluster remain !!!
corsa c ecu eeprom direct not work
space star 2002 eeprom pointers dont work after !!!
ford connect 2002 with 912 with cable 48/2 cluster dead mcu not readable even with etl !!!
teerak2uk
12th March, 2013, 09:12 AM
mercedes w221 cluster ok assyst ok
mercedes w164 cluter ok assyst ok
astra 2010 cluster ok
bmw e60 cas by cluster plug km changed in wrong adress and red dot on cluster remain !!!
corsa c ecu eeprom direct not work
space star 2002 eeprom pointers dont work after !!!
ford connect 2002 with 912 with cable 48/2 cluster dead mcu not readable even with etl !!!
What year Mercedes?
u.s
12th March, 2013, 09:34 AM
so there seems to be a new version from Yanhua Tech which is supposed to be more stable and doesn't suffer from the blue/white screen of death and comes with the CAS plug, anyone have this unit and is it worth paying that little extra for ?
teerak2uk
12th March, 2013, 11:57 AM
so there seems to be a new version from Yanhua Tech which is supposed to be more stable and doesn't suffer from the blue/white screen of death and comes with the CAS plug, anyone have this unit and is it worth paying that little extra for ?
maybe they change a couple of chips that many people know about already, maybe better to also buy R260 for CAS module
*Just remember Chinese will tell you many things to sell a product but don`t mean it will do it*
u.s
12th March, 2013, 12:08 PM
maybe they change a couple of chips that many people know about already, maybe better to also buy R260 for CAS module
*Just remember Chinese will tell you many things to sell a product but don`t mean it will do it*
agreed, just a way to make more money i think.
rukartinatv
12th March, 2013, 03:20 PM
mercedes w221 2007 cluster ok assyst ok
mercedes w164 2006 cluter ok assyst ok
astra 2010 cluster ok
bmw e60 cas by cluster plug km changed in wrong adress and red dot on cluster remain !!!
corsa c ecu eeprom direct not work
space star 2002 eeprom pointers dont work after !!!
ford connect 2002 with 912 with cable 48/2 cluster dead mcu not readable even with etl !!!
What you mean bmw e60 cluster plug?
You mean you did cas try dash plug
Cable 62 and you have dot.
Dot will desapere after 19 km.
drpeter
12th March, 2013, 03:22 PM
Never had a dot...........
Verstuurd van mijn GT-N7000 met Tapatalk
oep
12th March, 2013, 03:48 PM
possible selected cas3 instead cas2 or viceversa, diff place milage..
kiszony11
12th March, 2013, 03:57 PM
Question for users.
Is it possible to use this tool with dashes only on the bench? Is it possible to edit eeprom?
Thanks for all answers.
sepistar
12th March, 2013, 04:24 PM
not only of the bench,it goes through obd too.and yes there are possibilities to edit the eep.
br.
kiszony11
12th March, 2013, 04:28 PM
not only of the bench,it goes through obd too.and yes there are possibilities to edit the eep.
br.
I know that through OBD ;). How can I edit the eeprom- on dp III or on PC?
rukartinatv
12th March, 2013, 04:30 PM
Never had a dot...........
Verstuurd van mijn GT-N7000 met Tapatalk
Did you did cas2 3 try dash plug on what bmw?
Its work ok.
Did you try e65 facelift try dashplug?
Thank you
dyc
12th March, 2013, 04:49 PM
What you mean bmw e60 cluster plug?
You mean you did cas try dash plug
Cable 62 and you have dot.
Dot will desapere after 19 km.
read manual for BMW CAS_WEISS_DIAGNOSE and all be clear , dot not dissapear even after 100 km in this case , only reason for test was a backup made with rosfar early.
sepistar
12th March, 2013, 05:07 PM
I know that through OBD ;). How can I edit the eeprom- on dp III or on PC?
on dp3 you can edit the eep lines wich you want and then write back.if you don't know how,please read the manual.
br.
antibisic
12th March, 2013, 05:48 PM
mercedes w221 2007 cluster ok assyst ok
mercedes w164 2006 cluter ok assyst ok
astra 2010 cluster ok
bmw e60 cas by cluster plug km changed in wrong adress and red dot on cluster remain !!!
corsa c ecu eeprom direct not work
space star 2002 eeprom pointers dont work after !!!
ford connect 2002 with 912 with cable 48/2 cluster dead mcu not readable even with etl !!!
You made 221 without can filter?
dyc
12th March, 2013, 05:57 PM
You made 221 without can filter?
off course with can filter
kiszony11
12th March, 2013, 07:26 PM
on dp3 you can edit the eep lines wich you want and then write back.if you don't know how,please read the manual.
br.
Thank you very much for all info's
solar
12th March, 2013, 08:24 PM
stilo 03 with cable 51 OK,
CAS2 with direct cas plug connection OK
CAS3 read crazy mileage something like 23143236,did not try to change(try just for play).
mislav88
12th March, 2013, 09:26 PM
when you tried cas2, did it write unknown version in the dialog box?
solar
12th March, 2013, 09:56 PM
i think no,i double check in 20min time:)
no dont show unknown version,show version:234253(something like this).
javyb
12th March, 2013, 09:59 PM
stilo 03 with cable 51 OK,
CAS2 with direct cas plug connection OK
CAS3 read crazy mileage something like 23143236,did not try to change(try just for play).
You say CAS3 read crazy mileage was that by OBD or by 4 wire cas plug
solar
12th March, 2013, 10:09 PM
yes,with 4 wires CAS plug.
and show INIT error and crazy mileage.
javyb
12th March, 2013, 11:30 PM
yes,with 4 wires CAS plug.
and show INIT error and crazy mileage.
When I try with cas plug I get no connection, if u try by OBD let me know results
javyb
12th March, 2013, 11:32 PM
yes,with 4 wires CAS plug.
and show INIT error and crazy mileage.
Can u post wiring of your cas plug I.e wire colour and pin on 25 pin connector maybe it wired up different
claudio35
13th March, 2013, 12:45 AM
Mercedes c200 cable 8/9 no works
solar
13th March, 2013, 10:23 AM
cas plug 35pin(black) to digi 10pin
cas plug 34pin(green-red) to digi 25pin
cas plug 26(yellow) to digi 9pin
cas plug 12(braun-black) to digi 13pin
dyc
13th March, 2013, 12:18 PM
cas plug 35pin(black) to digi 10pin
cas plug 34pin(green-red) to digi 25pin
cas plug 26(yellow) to digi 9pin
cas plug 12(braun-black) to digi 13pin
have you got description of cable 48/2 ?
sepistar
13th March, 2013, 12:53 PM
need to do an vito year 2008.what are to expect?as i have never done before.
br
solar
13th March, 2013, 02:24 PM
for 48/2 i think this:
brown pin 13 gnd
white pin 7 +5v
green pin 17 Reset
yellow pin 18 BCKND
work on 307bsi,no work on rexton dash(did with carprog).more not tested.
lama23
13th March, 2013, 02:31 PM
Volvo v70 2011 read write ok and mileage didn't jump back!
dyc
13th March, 2013, 03:42 PM
Volvo v70 2011 read write ok and mileage didn't jump back!
but make mileage tampering fault in instrument cluster :)
blackpirate
13th March, 2013, 09:41 PM
but make mileage tampering fault in instrument cluster :)
huh?
what do you mean?
sepistar
13th March, 2013, 09:47 PM
need to do an vito year 2008.what are to expect?as i have never done before.
br
nobody has done vito 2008??
br.
teerak2uk
13th March, 2013, 09:58 PM
huh?
what do you mean?
He is on about someone else tried that same model/year and showed error or tamper dot on dash like BMW I think
teerak2uk
13th March, 2013, 09:59 PM
nobody has done vito 2008??
br.
Look at PDF's and try
autocargo
13th March, 2013, 11:16 PM
I have read from various users that most EDC15-16 not working... Is that right? I only got one to try on...Touran 2005 EDC16 and did not work... Somebody that is using his one more often, what are your experiences? Thanks.
vageric
14th March, 2013, 05:34 AM
huh?
what do you mean?
he means that digiprog damage the flash from volvo cars
and you get error like ex. ignition switch not working ect.
dyc
14th March, 2013, 07:06 AM
huh?
what do you mean?
look at the picture , fault is not eraseble , maybe when cem solution will be known?
dyc
14th March, 2013, 07:16 AM
Never had a dot...........
Verstuurd van mijn GT-N7000 met Tapatalk
and e60 dot picture after digi3 , so better use other tools for cas :)
BrendanT
14th March, 2013, 07:26 AM
can about please help me with the PDF file for hyundai i10 thanks
batandball
14th March, 2013, 07:32 AM
and e60 dot picture after digi3 , so better use other tools for cas :)
Can I ask you are you using digiprog3 machine for dash and cas ????
drpeter
14th March, 2013, 07:40 AM
Sorry? I did many many bmw cas with digi never had a dot. Maybe you have problems with the dash programming.
Verstuurd van mijn GT-N7000 met Tapatalk
dyc
14th March, 2013, 08:15 AM
Sorry? I did many many bmw cas with digi never had a dot. Maybe you have problems with the dash programming.
Verstuurd van mijn GT-N7000 met Tapatalk
drpeter i know your experienced :) but did also many bmws , after restore backup and program mileage with x912 programmer dot dissapear without touching the cluster ,for cluster always use smok eraser with smok programmer
remsia
14th March, 2013, 08:20 AM
look at the picture , fault is not eraseble , maybe when cem solution will be known?
i can confirm that
try with 2 volvo
carprog reflash this dash ok. without foults
sepistar
14th March, 2013, 08:29 AM
carprog?or digi?be a little bit specific.year of the volvos,carprog ori or clone?
br.
remsia
14th March, 2013, 09:37 AM
carprog?or digi?be a little bit specific.year of the volvos,carprog ori or clone?
br.
one volvo xc70 one s80 after 2008
in both i get unerasable errors in tacho with digi clone
but dahshboards work ok and all the same after take out +12v
carprog orig .clone as i know cant make volvo
teerak2uk
14th March, 2013, 09:52 AM
i can confirm that
try with 2 volvo
carprog reflash this dash ok. without foults
Which model and years though
teerak2uk
14th March, 2013, 09:57 AM
one volvo xc70 one s80 after 2008
in both i get unerasable errors in tacho with digi clone
but dahshboards work ok and all the same after take out +12v
carprog orig .clone as i know cant make volvo
can customer see these errors or only shown under diagnostics?
sepistar
14th March, 2013, 10:21 AM
think only on diagnostic mate.
regards
vageric
14th March, 2013, 08:02 PM
you can see message mileage tempered with diagnostic tool
and dtc about key module in display!
batandball
14th March, 2013, 08:07 PM
Just to get this right are you using a different tool to read these faults or is it coming up on the car display ?
teerak2uk
14th March, 2013, 08:21 PM
Just to get this right are you using a different tool to read these faults or is it coming up on the car display ?
bit confusing lol but i think he means 2 x dtc but from diagnostics
vageric
14th March, 2013, 08:44 PM
Just to get this right are you using a different tool to read these faults or is it coming up on the car display ?
the dtc key module damage is coming up in display
and the mileage tempered you can read with diagnostic tool.
batandball
14th March, 2013, 08:48 PM
Have you cleared DTCs with Digiprog ?
emiliogsm
14th March, 2013, 10:37 PM
i have problem with can comunication,on K-line all is ok .May be someone have solution for this problem ?
can someone post good quality pictures on pcb ?
i thing problem is on can transcivers but all mu chips is with cleared symbols
if is possible to ident this 4 chip
thanks in advance
shirokov
14th March, 2013, 11:12 PM
Try this. :)
emiliogsm
14th March, 2013, 11:23 PM
Try this. :)
perfect !
thanks :beer:
emiliogsm
15th March, 2013, 05:20 AM
hm i am check all IC ...drivers,all seem to be OK ,
have a good voltage on it also check a can signal with osciloscope ..but have only level with 2.5v ....strange .
any idea whats wrong ?
Any help is welcome
vageric
15th March, 2013, 05:55 AM
Have you cleared DTCs with Digiprog ?
customer called me and ask me to help him.
some guy have change S80 with clone didgiprog for him
and after he had this problem. the guy tryed to clear error but problem remain.then i tryed with ori digiprog and dp3 and smok and smelecom and diag tool to clear error but no joy.
after spend couple days trying this and that i have extract the flash repair it and then all problem was gone.
on this forum also other members had the same problem with volvo's using clone digiprog.it damage the flash!
blackpirate
15th March, 2013, 10:27 AM
customer called me and ask me to help him.
some guy have change S80 with clone didgiprog for him
and after he had this problem. the guy tryed to clear error but problem remain.then i tryed with ori digiprog and dp3 and smok and smelecom and diag tool to clear error but no joy.
after spend couple days trying this and that i have extract the flash repair it and then all problem was gone.
on this forum also other members had the same problem with volvo's using clone digiprog.it damage the flash!
can u b more exactly?
how you extracted flash and repaired?
what you used etc!
thnx
teerak2uk
15th March, 2013, 12:20 PM
Maybe better to take backs with upa where possible on untested cars this is what I have started doing to reduces tears later on LOL
teerak2uk
15th March, 2013, 12:21 PM
Prevention is better than a cure and quite often cheaper
Nikola123
17th March, 2013, 04:44 PM
Golf 5 obd ok
octavia 2007 obd ok
vw lupo obd ok
astra 2000 obd ok
solar
17th March, 2013, 05:41 PM
2008 superB obd ok
2006 Suzuki swift eeprom ok
teerak2uk
17th March, 2013, 05:44 PM
2008 superB obd ok
2006 swift eeprom ok
Suzuki swift?
tomuch
17th March, 2013, 09:51 PM
passat CC 2009 dash OBD ok
DSG read wrong kilometer do somebody have solution for this
mislav88
18th March, 2013, 12:23 AM
use vcds for dsg
RCS
18th March, 2013, 08:00 AM
use vcds for dsg....
What do you mean by this? Change it with Vcds or just read it?
Thanks...
Sent from my iPhone using Tapatalk 2
blackpirate
18th March, 2013, 10:37 AM
use vcds for dsg
pls explain proceduree?
ive saw entering on some channels , but thats not real solution! or i am wrong??????????
mislav88
18th March, 2013, 11:08 AM
you can reset is with vcds to 0, i think digiprog does the same. procedure is explained here on forum
skens
18th March, 2013, 12:48 PM
hi
i try to DSG vw passat b6,yes read wrong km but put in 0000000
and read again 0000000!
regards
olegario
18th March, 2013, 01:01 PM
Can confirm that digi put 0km to the DSG (in Octavia at least)
batandball
18th March, 2013, 01:42 PM
Just put 0 in DSG
blackpirate
18th March, 2013, 01:45 PM
you can reset is with vcds to 0, i think digiprog does the same. procedure is explained here on forum
im lazy all the time not only monday!:P
but i found it!:)
http://www.digital-kaos.co.uk/forums/f174/dsg-km-reset-vcds-319726/
skens
18th March, 2013, 01:57 PM
hi
he would have to work or go to meni vw!
regards
antibisic
18th March, 2013, 02:56 PM
im lazy all the time not only monday!:P
but i found it!:)
http://www.digital-kaos.co.uk/forums/f174/dsg-km-reset-vcds-319726/
It exist more versions of DSG and NOONE tool work on all,I tryed digiprog original,smok,vcds and nothing
mislav88
18th March, 2013, 07:02 PM
Golf 6 2011 MM5 obd ok
sepistar
18th March, 2013, 08:44 PM
kienzle 1324 with adapter 47 on solder points,went fine and quickly.
br
teerak2uk
18th March, 2013, 08:58 PM
kienzle 1324 with adapter 47 on solder points,went fine and quickly.
br
What is kienzie
xtech
18th March, 2013, 09:51 PM
Mercedes truck tacho
digimile
18th March, 2013, 11:15 PM
hi
someone try sprinter 2007 over obd2 with digiprog...is it work????
thanks
u.s
19th March, 2013, 02:16 PM
will a 2006 Merc C class w203 work through obd port and does the EZS need to be done too? if so is that flash through obd port too?
thanks in advance chaps.
drpeter
19th March, 2013, 03:01 PM
If flashed through obd dash is flashed better program dash on back and program ezs with rosfar.
Verstuurd van mijn GT-N7000 met Tapatalk
u.s
19th March, 2013, 03:21 PM
so dash can be flash by obd (cable 16) or dash plug (cable 60)
and the EZS must be done too?
and you recommend using rosfar for the EZS? cas3, r260, r270, blue clone, red clone ???...lol
would an xprog or carprog do?
thanks again
teerak2uk
19th March, 2013, 06:35 PM
so dash can be flash by obd (cable 16) or dash plug (cable 60)
and the EZS must be done too?
and you recommend using rosfar for the EZS? cas3, r260, r270, blue clone, red clone ???...lol
would an xprog or carprog do?
thanks again
Use Red R260s for it
drpeter
19th March, 2013, 08:45 PM
so dash can be flash by obd (cable 16) or dash plug (cable 60)
and the EZS must be done too?
and you recommend using rosfar for the EZS? cas3, r260, r270, blue clone, red clone ???...lol
would an xprog or carprog do?
thanks again
Dash with dash plug (60), red clone rosfar for EZS. Xprog is also fine for EZS but I think you have to edit the km then manually.
u.s
19th March, 2013, 09:49 PM
this one ??? http://gocardiag.com/bmz_cache/1/1b9953b76bc32e5c5f9c9a72670f3587.image.125x125.jpg
teerak2uk
19th March, 2013, 10:03 PM
this one ??? http://gocardiag.com/bmz_cache/1/1b9953b76bc32e5c5f9c9a72670f3587.image.125x125.jpg
Yes that's the one
tom0077
19th March, 2013, 10:41 PM
Hi, how do edc audi a4 1.9 tdi year 2004 no bookmark digiprog
xelos
20th March, 2013, 06:18 AM
as EDC15 - ok
as EDC16 - do not DiagProg
tom0077
20th March, 2013, 03:53 PM
Hi, how do edc audi a4 1.9 tdi year 2004 well, bookmark, bookmark you can use digiprog edc seat toledo or skoda octavia to ecu adjustment year 2004 audi a4 1.9 tdi
Nikola123
20th March, 2013, 08:49 PM
punto 2004 obd ok
doblo 2005 obd ok
tom0077
21st March, 2013, 09:58 AM
Golf 5 2006 1,9 tdi --obd OK
Focus 2007 1,8 TDCI --obd OK
Passat 2002 1,8 20v --obd OK
Mercedes A 2004 1,7 CDI -- obd OK
looly
21st March, 2013, 11:27 AM
Has anyone sucessfully managed to do a laguna 3 (2008) abs module with digi wigi?
Thanks.
kst
21st March, 2013, 05:09 PM
cables and adapters used to digipro3 tacho 2008 clone would need to know if the cable 42 of digipro is the same tacho 2008 908
blackpirate
21st March, 2013, 05:16 PM
cables and adapters used to digipro3 tacho 2008 clone would need to know if the cable 42 of digipro is the same tacho 2008 908
im confused...:wink:
so anybody can say if its ok for edc16???
autocargo
21st March, 2013, 05:41 PM
im confused...:wink:
so anybody can say if its ok for edc16???
I'm on the same boat... I did ask the same question some time ago but nobody has replied... The only one I tried, VW Touran edc16 did not work.... :dontknow:
yannick1800
21st March, 2013, 06:19 PM
im confused...:wink:
so anybody can say if its ok for edc16???
I can confirm that EDC16 work.
I did
VW Golf 5 => ok
Audi A6 => ok but with Golf 5 menu. When i tryed with in Audi A6 menu, it didnt worked. So i readed it with Golf 5 menu, KM that was read was ok, so i changed it it worked !!!
autocargo
21st March, 2013, 06:26 PM
Have you tried Touran edc16? It reads correct km, it writes new km,finishes them ok, but when checking again no change, still old km. Tried with Golf 5 EDC and other models as well...
tom0077
21st March, 2013, 09:25 PM
Hi, how do edc15 1,9 tdi volkswagen ,audi,skoda.Please help
sepistar
22nd March, 2013, 08:06 AM
I can confirm that EDC16 work.
I did
VW Golf 5 => ok
Audi A6 => ok but with Golf 5 menu. When i tryed with in Audi A6 menu, it didnt worked. So i readed it with Golf 5 menu, KM that was read was ok, so i changed it it worked !!!
i try edc 16 on two audis 2004 and 2006,none of them work.it read the mileage,write for a while(cca.10 min) but mileage are not changed.
br.
batandball
22nd March, 2013, 08:33 AM
i try edc 16 on two audis 2004 and 2006,none of them work.it read the mileage,write for a while(cca.10 min) but mileage are not changed.
br.
Like the post you quoted on said try it with golf 5 EDC 16
sepistar
22nd March, 2013, 08:43 AM
Like the post you quoted on said try it with golf 5 EDC 16
that's how i did,but not working.try even with t5 edc 16,results are the same.
br
davecooper47
22nd March, 2013, 02:34 PM
Tried to do a Merc Vito EZS with 908 mask set K85K and it wouldn't work. I think it connected but not sure. It said trying and counted up to about 20 trys but didn't read. A friend told me to turn the voltage down to about 10.5v. Anyone else had this problem.
solar
22nd March, 2013, 11:26 PM
for edc15+edc16 supervagblue much much better then digiwigi.
blackpirate
22nd March, 2013, 11:51 PM
for edc15+edc16 supervagblue much much better then digiwigi.
off topic:
this one its ok for edc16???
VAG DASH K+CAN V4.22 - $46.60 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://autoservicea.com/index.php?main_page=product_info&cPath=72&products_id=665)
solar
23rd March, 2013, 12:17 AM
dont know about this one,program says yes,but true knows only chineese maker/cracker.
sepistar
23rd March, 2013, 06:30 AM
off topic:
this one its ok for edc16???
VAG DASH K+CAN V4.22 - $46.60 : go car diagnostic , scanner , car , auto scanner, car diagnose, diagnostic tools (http://autoservicea.com/index.php?main_page=product_info&cPath=72&products_id=665)
have vag dash k+can 5.14(the pink one).can only say that are very,very buggy.on some car work,but on most of them don't.have a look inside,but are completely filled with some glue.then give up.
br.
iwen31000
23rd March, 2013, 12:11 PM
hello I did caddy 2011 and 2012 without problem, but when I tried caddy edition 30, DP3 detect the dash combi and just aftre verification 1 and 2 he jump to the main menu .
bkenigma
23rd March, 2013, 01:02 PM
Has anyone sucessfully managed to do a laguna 3 (2008) abs module with digi wigi?
Thanks.
DigiWiggy will not do this model OBD. You need a real tool especially to block ABS. Probably cheapest working tool for this SMOK
bkenigma
TULGEYWOODMAN
23rd March, 2013, 01:45 PM
hello I did caddy 2011 and 2012 without problem, but when I tried caddy edition 30, DP3 detect the dash combi and just aftre verification 1 and 2 he jump to the main menu .
dp3?????????????
teerak2uk
23rd March, 2013, 02:54 PM
Volvo XC90 2011 MC9s12DG128 ok
vageric
23rd March, 2013, 06:38 PM
Volvo XC90 2011 MC9s12DG128 ok
where this with rond kloks like the xc60,xc70 2007-up or the old type?
solar
23rd March, 2013, 08:10 PM
today i did audi a6 2004 old shape and strange things happens.
first,i was not sure make off dash,so simple use a6 2001 on option,digi connects and shows ?,i dont want to change to new mileage and press X,and after this digi not go to main menu,but start to write something(with out enter any miles),and after finished i see on dash 639000miles:)...car still starts,so i try to enter new digits again and see only message No Connection.....was little bit worry,start car did everything again,for play enter 120000miles,everything went OK,but when try to enter what car owner want again No Connection,try 20 times with ignition on,or car running.......and finally did after lot off try with car running...My question is this normal?or just some bug off car,or digi(my obd16 cable fixed with new connection).
Ecu did only with supervag again.
iwen31000
23rd March, 2013, 08:22 PM
dp3?????????????
digiprog 3
teerak2uk
24th March, 2013, 01:26 AM
where this with rond kloks like the xc60,xc70 2007-up or the old type?
With this version
briangsm
25th March, 2013, 01:38 PM
The best Digiprog3 on aliexpres
http://www.aliexpress.com/wholesale/wholesale-digiprog-3-odometer-programmer.html?SearchText=digiprog%2B3%2Bodometer %2Bprogrammer&CatId=0&initiativeId=AS_20130325043453&SortType=total_tranpro_desc&filterCat=200000505,200000195,200000504&groupsort=1 (http://www.aliexpress.com/wholesale/wholesale-digiprog-3-odometer-programmer.html?SearchText=digiprog%2B3%2Bodometer %2Bprogrammer&CatId=0&initiativeId=AS_20130325043453&SortType=total_weight_score_desc)
Which one to choose How price 300 to 450$ any sugest vendor who honest ?
iwen31000
25th March, 2013, 07:54 PM
please HELP ME ?????????
hello I did caddy 2011 and 2012 without problem, but when I tried caddy edition 30 2013 with the same dash , Digiprog detect the dash combi and just aftre verification 1 and 2 he jump to the main menu . where is the problem please
diagtech
25th March, 2013, 08:00 PM
New software version need dp3 etc to do it
javyb
25th March, 2013, 08:00 PM
Considering your digiprog is version 4.82 which came out match 2012 and the caddy is 2013 model so it's most likely the version is not covered
tomuch
25th March, 2013, 08:09 PM
take this here i bought there very good quality for me tell him that i (mihajel)give you this link
Digiprog III Digiprog 3 Odometer Programmer with Full Software v4.82 2012 New Release-in Air Bag Scan Tools & Simulators from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/item/Digiprog-III-Digiprog-3-Odometer-Programmer-with-Full-Software-v4-82-2012-New-Release/582361509.html)
then you get it for 385 including dhl shipping
The best Digiprog3 on aliexpres
http://www.aliexpress.com/wholesale/wholesale-digiprog-3-odometer-programmer.html?SearchText=digiprog%2B3%2Bodometer %2Bprogrammer&CatId=0&initiativeId=AS_20130325043453&SortType=total_tranpro_desc&filterCat=200000505,200000195,200000504&groupsort=1 (http://www.aliexpress.com/wholesale/wholesale-digiprog-3-odometer-programmer.html?SearchText=digiprog%2B3%2Bodometer %2Bprogrammer&CatId=0&initiativeId=AS_20130325043453&SortType=total_weight_score_desc)
Which one to choose How price 300 to 450$ any sugest vendor who honest ?
teerak2uk
25th March, 2013, 09:34 PM
This is the one that i got
Main Unit
Main Unit of Digiprog III Digiprog 3 Odometer Programmer with OBD2 Cable-in Code Readers & Scan Tools from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/item/Main-Unit-of-Digiprog-III-Digiprog-3-Odometer-Programmer-with-OBD2-Cable/742854271.html)
Cable set
Cables Set for Digiprog III Digiprog 3 Odometer Programmer Fast Express-in Code Readers & Scan Tools from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/item/Cables-Set-for-Digiprog-III-Digiprog-3-Odometer-Programmer-Fast-Express/672528558.html)
strange that it worked out cheaper to buy unit and cables separate from the same company than buying complete kit
but seems to be ok just replace the serial connector on obd cable because of bad connections so i heard but to be honest how can anybody complain paid for itself on me first outing
iwen31000
25th March, 2013, 11:30 PM
but When i compare with vagcom , the two are the same only diference in the version of the dash caddy 2012 (2K 0 920 875 E) And caddy 2013
iwen31000
25th March, 2013, 11:31 PM
but When i compare with vagcom , the two are the same only diference in the version of the dash caddy 2012 (2K 0 920 875 E) And caddy 2013
Caddy 2013 2K 0 920 875 L
iwen31000
25th March, 2013, 11:37 PM
No news to update our digiprog
briangsm
26th March, 2013, 03:43 PM
THx for info today bettter price :) i buy as this 2013 100% original high quality Newest 3 year warranty Digiprog III Digiprog 3 Odometer Programmer With Full Software v4.82-in Code Readers & Scan Tools from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/item/2012-100-original-high-quality-Newest-Digiprog-III-Digiprog-3-Odometer-Programmer-With-Full-Software-v4/700802850.html) witch new red upa 445$ free sheping
960
27th March, 2013, 05:21 PM
Did a 2012 Landcriuser yesterday. Right calculation but odo has stopped counting:( Trip Counter still works
shirokov
27th March, 2013, 05:40 PM
The calculation is wrong. In addition to the odometer value is necessary to properly calculate the checksum.
Seems, the Digiprog III can not correctly calculate the checksum.
PremierD
27th March, 2013, 05:54 PM
Did a 2012 Landcriuser yesterday. Right calculation but odo has stopped counting:( Trip Counter still works
Post the dump mate .. ...:)
960
27th March, 2013, 06:01 PM
Post the dump mate .. ...:)
Didn't save the dump (How can I save dumps With digiprog?) Wasnt noticed until car was sold, so New owners will take it to Toyota for warranty repair. Hope Toyota dont understand whats happened :)
PremierD
27th March, 2013, 07:14 PM
Didn't save the dump (How can I save dumps With digiprog?) Wasnt noticed until car was sold, so New owners will take it to Toyota for warranty repair. Hope Toyota dont understand whats happened :)
very easy to save it .. in fact if you have not used the eeprom function ..since doing the job .. select it and the Dump will be shown .. :)
javyb
27th March, 2013, 07:16 PM
The calculation is wrong. In addition to the odometer value is necessary to properly calculate the checksum.
Seems, the Digiprog III can not correctly calculate the checksum.
Is that on land cruiser only or many other makes???
batandball
27th March, 2013, 07:19 PM
All makes of vehicles
TULGEYWOODMAN
27th March, 2013, 08:08 PM
THx for info today bettter price :) i buy as this 2013 100% original high quality Newest 3 year warranty Digiprog III Digiprog 3 Odometer Programmer With Full Software v4.82-in Code Readers & Scan Tools from Automobiles & Motorcycles on Aliexpress.com (http://www.aliexpress.com/item/2012-100-original-high-quality-Newest-Digiprog-III-Digiprog-3-Odometer-Programmer-With-Full-Software-v4/700802850.html) witch new red upa 445$ free sheping
3 year warranty sounds good, youve done well.
TULGEYWOODMAN
27th March, 2013, 08:11 PM
jesus christ , I dont believe what I am reading.
javyb
28th March, 2013, 05:48 PM
Has anybody managed to do a CAS2 3 or 3+ via OBD or CAS plug on bench?
everything I try with cas plug I get no connection message on machine. Haven't tried by OBD too scared
batandball
28th March, 2013, 06:20 PM
Has anybody managed to do a CAS2 3 or 3+ via OBD or CAS plug on bench?
everything I try with cas plug I get no connection message on machine. Haven't tried by OBD too scared
so your one of those that sits on the fence and watches some other daft T--T try it very brave Jav. :laugh:
javyb
28th March, 2013, 06:43 PM
so your one of those that sits on the fence and watches some other daft T--T try it very brave Jav. :laugh:
No just not tried it OBD tried with CAS plug had no joy. Have u had any joy by OBD Paul
batandball
28th March, 2013, 07:02 PM
I think there's only DP3 that does cas 3 and 3+ with out putting dash back in, in so many second so dash don't jump back to original. By the time you've p-ssed about with other machines its quicker taking cas out :stupid:
rocket ron
28th March, 2013, 11:58 PM
Done a 59 plate 1 series CAS down OBD. Work fine for me, this is how i went about it.
Read CAS if correct mileage disconnect!
Remove clocks and read, save, alter and then re-write to M35080. Swap chips.
Re-connect DIGI and read CAS again, after read re-connect clocks ASAP as timer counts down from 200. all done !!
Rocket-Ron.
javyb
29th March, 2013, 12:52 AM
How many CAS units u done by OBD using digiprog? Cheers
davecooper47
29th March, 2013, 04:12 AM
Clone Digiprog does Cas 3's OBD but not all of them. If it doesn't want to, it just says unknown version. There's nothing to be scared of. Get your soldering iron out!!! No damage done. What a few of us would like to know is: will the CAS's program diagnostically with the CAS cable. Has anyone succeeded?
batandball
29th March, 2013, 08:31 AM
No Dave tried a few mate, but it doesn't damage anything
Like I said just as quick to take cas out
Clone Digiprog does Cas 3's OBD but not all of them. If it doesn't want to, it just says unknown version. There's nothing to be scared of. Get your soldering iron out!!! No damage done. What a few of us would like to know is: will the CAS's program diagnostically with the CAS cable. Has anyone succeeded?
TULGEYWOODMAN
29th March, 2013, 10:00 AM
Does the original do this?
javyb
29th March, 2013, 10:18 AM
Dave do u mean on bench with ST CAS plug? If so then I always get no connection
davecooper47
29th March, 2013, 05:28 PM
Yes that's what I meant. I haven't got ST CAS cable but was going to make one. I won't bother if it doesn't work. The ones I've done via OBD have saved me 20 minutes on the job and of course, there's no soldering. Most of the CAS 3's I've had have gone OBD up to about late 2011. I normally start CAS reading with Digiprog while I'm soldering EEprom back on dash. If it's unknown version I haven't lost any time. Just have to use Rosfar which I would have to do anyway.
u.s
29th March, 2013, 11:03 PM
this was posted earlier in the thread by a user who made his own ST CAS cable:
CAS2
189100
CAS3
189101
briangsm
31st March, 2013, 11:15 AM
find dimet 1 to#622 http://www.digital-kaos.co.uk/forums/f174/digiprog-3-clone-questions-answers-282850/index42.html#post1748629
i find 622 to 1422
i modify
Cars that work:
Audi A4 09 diag, 2011
Ford Focus diag,
Peugeot E7 BSI and dash,
Fiat Doblo diag,
Honda Accord,
Peugeot 407 06,
Peugeot 406 bsi and dash,
ford Transit
Just done a merc 204 and 212 Diagnostic mileage and assyst
A4 I did one yesterday
merc 204 212 tried and tested
Audi A3 2006 Diag
Mercedes 212 Diag
Mercedes 204 Diag
Mercedes 204 assyst Diag
Mercedes Vito MM Diag
Ford Focus 2008 to 2011 Diag
Ford Fiesta 2008 up Diag
Ford Mondeo 2008 Diag
Fiat Doblo Diag
Nissan Navara 9S12
Peugeot 307 912 BSI
Peogeot 307 95160 BSI
Old Toyota Avensis Diag back of cluster
Seat Leon 2006 Diag
Toyota Dyna contact points using Hiace
Volvo V70 Diag
Volvo V70 error clear
focus 2011 diag
Porsch CAYENNE
2002-2010 (diag and 24c08)
2010-up -only 95640 eeprom
New Volvo goes by OBD tried and tested
2008 up I did V70 the other day and error clear works
Even on 211 you cant make assyst by OBD
Astra-j (2009) works OK via OBD
VW Passat 2007 works OK via OBD
Astra-H works OK via CHIP
Audi A8 2007 works OK via OBD
Ford C-Max and S-Max work OK via OBD
Ford Fiesta & Focus works OK via MCU, not Dash Connector ?!?!
Golf 3 & Golf 4 works OK via dash connector and via OBD
Reading 93Cxx, 24Cxx, 95xxx, 912, 9s12 works OK.
Vw T5 DASH -2009 OBD OK
EDC16 T5 - 2009 OBD OK
VW T5 DASH 2005 OBD OK
EDC T5 -2005 OBD OK
CADDY 2009 -OBD OK
bMW 5 - BY DASH PLUG 1998 OK
SKODA SUPERB- 2007 OBD OK
BMW CAS 2 (2004) BY CAS PLUG OK
Golf 6 2009
renault megane 3 only dash ,abs 95160 does not work
Megan 3 ABS, work only with ESP unit ,without ESP not work
Golf 5 2005 2006 2007
Seat leon 2007
peugeot 207 95128 but you must select citroen C3 menu
Skoda fabia 2001
clio 3 2009
c4 2006
i try ford smax work fine i think with fords work fine
Volvo S 80 from 2009 done in 5 minutes,
vw eos 2007 in menu -2009 (1F) dignostic
read and change km in tacho and DSG
t5 by obd worck ok,dash and edc
citroen c2 dash & bsi ok
galaxy 04 plate ok
mondeo 04 ok
golf mk 5 06 ok
Golf 5,2008 ok,
golf 6 2011 ok,
ford focus 2007 ok,
t5 ok,edc 16 ok,
seat leon 2007 ok
BMW E46 by 20 pin DLC work ok year 2000
Insignia work by Eprom direct,OBD get acces denied
Mercedes 2008 by OBD work ,dash only!
Nissan quascai 2008 by eprom direct working
tested on 211 2008 work with flashing option(block syncro with EZS in dash flash)
audi a4 ,2.7 benz, 1999 year!
93lc66 , b5-dash 8d0 vdo with BC!!!!!
audi a4 1994-2001
audi11/97-
diagnostic connect,not read old km write new km ok
2011 ford focus like a dream obd2
golf4 19tdi 2000year
Rb4 audi a4 make today ,worck like a charm,
seat ibiza 2004 the same worck ok
skoda octavia with nec inside work ok by obd
T4 2006 obd ok (meni:vw T4 98-/diagnostic connect,not read old km write new km ok)
jumper 2008 obd ok read old km write ok
Peugeot 406 VDO Dash done by cluster conector...ok
Focus 2001 Done with cluster connector .............ok
Audi A3 ,2000 year, M73 works OK via OBD
mb w204 2011 obd2 work ok take 2 min cleare error work ok
Passat 2012
Fiesta 2011
Fiesta 2008
tested on audi A8 4E-work ok;
ford focus 2010-OK ;
tuareg RB8 dash-ok and EDC16-OK
2009 Audi R8 done OK
2009 Insignia done OK
Chrysler 300C
2008 Mondeo Colour screen
did mb w204 2010 w212 2011 2 min joob done. work very good.
insignia 2010 by obd 1min job
audi a4 2008 .... by obd 30min job
audi a6 2004.... not from first try but ok (q7 the same )
audi a3 2003.... obd 1min job
mb ml 1999 obd ok
a4 1996 vdo obd ok
volvo xc 70 2008... obd ok
focus 2008 obd ok
sharan ....2001 with and without bord cpu obd ok
mercedes w 204 2009 year
W204 (C) ***8211; EZS - DIAG ok , 2 min
W204 (C) - TACHO - DIAG ok, 2 min
W204 (C) - ASSYST - DIAG ok, 15 min
Tested ok on vw polo 2007 crypto
punto 2004 old shape
seat cordoba 2003 old shape
scenic 2004 johnson control with c56
e60 dash with 35080 eep all ok.
mazda bt50 2009 ok
ford escape 2008 OBD ok
vw golf 6 ,2011 , VDO tacho obd 2 min !!ok!!
for the audi a4 2008 demand 1 min for reading and 30min for writing
a4 2008 30min job work ok by obd
I did a Audi A8 with Digiprog clone by obd the other day... worked perfect... it was 2008.
Vw polo 6r 2011 obd OK
VW lupo obd OK
Vw passat B6 -2008 obd OK 1min
Tested on VW Passat EDC16, working
Golf4 vdo ok edc 15 not work
tested on a 2001 corsa and all ok
try it the golf 5 ecu works diag
I read and write to obd VW T5 2007-8 year tacho and edc16
================================================== ============================================
http://www.digital-kaos.co.uk/forums/f174/digiprog-3-clone-questions-answers-282850/index42.html
autor dimet #622
i add
W204 (C) EZS - DIAG ok , 2 min
W204 (C) - TACHO - DIAG ok, 2 min
W204 (C) - ASSYST - DIAG ok, 15 min
FIAT BRAVA 2008 OBD work
GOLF 5 2008 kombiistrument 3HL , OBD -OK 1min
GOLF 5 2008 ECU DIAG R4 1,9L EDC 000SG OBD-ok 10min
VW Sharan 2008 dash OBD --ok
EDC 16 U31 via OBD not work( can`t write new mileage)
PASSAT 2011 Colour Dash OBD - OK !!! 5 min
Golf 5 2006 odo and ecu OK
Fiat bravo 2009 odo OK
Fiat 500 new odo ok
caddy 2011 work without an problem.
I believe same suppliers say :
BMW 1er / E81/E82/E87/E88 CAS3 Diagnostic OBD
BMW 3er / E90/E93 CAS3 Diagnostic OBD
BMW 5er / 60/E61 CAS3 Diagnostic OBD
BMW 6er / E63/E64 CAS3 Diagnostic OBD
BMW X5er / E70 CAS3 Diagnostic OBD
BMW X6er / E71 CAS3 Diagnostic OBD
Skoda Octavia 1.9 TDI PD 08.2008 year
Dash~1min OK
DSG ~30sec OK
ECU~ 5min OK
VW Touran 2007 1.9 TDI PD
Dash~1min OK
ECU~ 5min OK
LANCIA PHEDRA 2002 (CITROEN C8, P 807)
BSI HC912 OK
DASH 95020 OK
laguna 2005- 9s12 ok
BMW EWS 3 (OD46J) with ST35 , works perfekt!!
Audi A4 RB8 correction OBD ok (1min)
Tried ECU(like Passat B6) read km good, but after 5 minutes of reading-writing got same km.
Yes correct. Now read and inserted new correct km. . On golf 5 edc16 i do so and all ok
Focus 2009 today, went OK..
Golf 5 2007 ODO AND ECU EDC16 ok
A4 8K 2008- by obd.Yep! Ok!
Hello
is there anyone who tried A4 8K 2008- by obd.
for me never work with that car
funny thing i do all with the vag k + can ( blue toy )
Polo 4 magneti ok
Passat b5.5 ok
Audi rb4 ok
Micra 2004 ok solder points
A class 2001 not work(shows new km for a second and returns old)
did you use the right version in software A Class
A class w168 works but only with engine running
Peugeot 306 by dashplug working good
w211 2006 years by obd it work good
no need to remove ezs and dash; only by obd
2 munite
Only flash dashboard old km still in EZS and many other module on W211 . Neither device can not do km in EZS on OBD
(w203,w211) Mororola 9s12 and 912
i tried the w203 2001 years no connection but the w211 work good i use the programm tacho diag by obd the digi reads
actuel mileage correct ,i put the new mileage it work fine no need to remove any fuse and the programm
fehlerspeicher work good also
Audi Q7 2007 works ok 30sec. (I accidently used touareg 2004 up menu in digi vigi and it recognized old km and
changed no problem)
Read all posts and you will find the answer,
I tried it on a A3 M73 dash (first make backup with upa) than i tried with Digi Prog.
As i could remember i reads good milleage but does not change the milleage, removed battery for a while and milleage
stayed the same.
Finally changed milleage with good old TU by cluster plug.
Ecu 3.0 tdi wrote no connection. Dp3 cant do it either.
Focus 2010 10sec ok
Passat 2009 - 1min OK
Passat 2012
Fiesta 2011
Fiesta 2008
Works OK
is the 2010 fiesta just the same
***353;koda 2007 tacho diag ok 1 min
ecu diag ok 5 min
VW Golf MK5 2.0 TDI 140cv DSG BKD Engine
Dash kms : OK
DSG kms: OK
ECU Diag: Unknown version, not read
Service: OK
Peugeot 308 2011 odo 95080 and BSI 95128ok
VW Polo 2012 only obd ok
Yamaha R1 2008 95lc56 work ok.
citroen c2 2004
digiprog 3,plug1
tacho siemens c46
bsi siemens 95160
read ok
write ok
p.s.
psa bsi tool not respond tacho and bsi
audi A4 2010 ok.
with Visteon work good
Golf6 m.m 2011 done by obd in 5 minutes,work
Skoda Fabia 2007 1.9 Dash and Ecu by obd work ok
Digiprog 3 clone in mercedes w204. Thanks, working 100%
Dash diag is for doing dash only when using CAN blocker
Fiat 500 obd work ok.
Audi A3 2010 obd Work ok.
Can someone please post the Digiprog working CAS lead schematic as the one ive got looks like its been totally
bodged as expected. I allready have the schematic for direct cas plug in pins, but im looking for the "Dash plug
connector schematic" if that makes any sense.
Also can someone please confirm if they have managed to do a facelift 2007 BMW E65 CAS yet with Digiprog clone ???
Thanks in advance
black pin 13
white pin 12
orange pin 9
red pin 10
on the dash plug check tracks
this picture shows you track repairs
Black and white tracks just need repair
Red and orange tracks discard and use wire to put to the right pins
also
Audi Q5 2011 Takes 30 min Diag OK
Audi a6 2005 Obd work ok
2007/2008 polo with c86 crypto through diag, first i took out dash made backup with upa and then put back and
programmed all ok.
i also did a 2008 polo with 9s12 with soldering back on board all ok.
so i think you can try but make a backup first.
skoda octavia 2012 diag ,ok,5 min!! 4.82 version ,octavia 2008>
after write km,must connect diagnosic and erase faults airbag
regards
VW Bora 2008 micronas + 24c32 via OBD OK!
VW Jetta 2012 Nec + 24c64 via OBD OK!
Golf5 Dash Visteon 95160 less than a minute OK
Golf5 ECU EDC16 - 6~8 minutes OK
mercedes a-class A160 , 2000year ,obd diag ok ,1 min!
meni w168,diag not read old km, write new,tacho restart!
service not work!!
Caddy 2012 ok, polo 2012 ok
If it was polo johnson controls screen goes black
Audi TT `00 M73 diag - read old ok and write new ok
Quote Originally Posted by 88diablo View Post
Land Rover Freelander2 2008 -Dash and BCU OK
Ive beed tried one but bad calculation on BCU.
dash ok.
The one I did was 57 plate 2008 model. It was BCU diagram 1 in the PDF. I took the 2 boards apart first and read
with UPA to be safe but then put back together and did with Digi in circuit. Did all the fuses and drive 2km
procedure and all was fine.
Full marks for energy...........and with eyes like that it must be difficult to drive 2km
its amazing what a couple of hundred quid can get you.
touareg 7L 2009 ok
Dodge Caliber 2008. HC12 with plug 48 OK 2 min. Removing cluster not fun.
Scoda Fabia 08 dash k-line 5J0 crypt , obd2 read old-? , write new km OK !!!
edc15 works only direct to chip, not obd. use simple kkl cable for them
edc16 works obd with digiprog
Scoda Octavia 2011 NEC 24c32 5min OBD fine
and T5 07 dash (full MFA) obd write-Ok
ECU EDC16 read and write- 7min ALL FINE
did corsa c 05 without problems, only you have to hold trip reset button while programming, and after that
disconnect battery for a few seconds
JEEP COMPAS OBD FINE
corsac obd OK
ford fokus 2002,read old km----not write new km
opel insignia obd -------not comunicate do via chip
2004 VW TOUAREG OBD OK
2006 AUDI A4 OBD OK ( M73) DIDN'T READ
Tried to do e71 X6 but no joy. Read correct miles and went through procedure and asked to reinsert dash etc but old
mileage return in dash when done.you mean cas try obd dont work?
Yes I did dash then tried to do cas with obd but no joy.
Honda cr-v 2007 93c76 plug 1, read old km ,write ok
Q7 2007-2008 r/w ok
A4 2007 r/w ok (and exact km )
c1 2008 r/w ok
touran 2005 r/w ok
Skoda Fabia VDO 6Y0 920 883M B41, 93c86 by OBD OK, DIDN'T READ
Golf 6 2011 read/write ok in 5min
Fabia read ?????? but write ok ( 2002y)
Focus 2003 24c16 by eeprom clip read/writes OK.
yes, dont read the original, but can write new km, skoda fabia 2004, 93c86 inside, do it by OBD
opel Meriva 2004,obd ok 5 min!!
not read old km write new,but mast hold trip Yes same procedure for corsa c
Citroen xsara 2004 dash sagem 93c66, bsi valeo 95040,
by eeprom clip
read/write km OK
Astra G '99 with TRW dash.
Dash with 24C02 eeprom. Read/Write OK with eeprom clips
Originally Posted by norbisko View Post
2006 Ford fusion obd- not work
2006 VW Jettta - dash read wrong mileage (34,xxx miles )
ecu - unknown version
dsg- read wrong mileage ( 22,xxx miles)
Btw for Plug 1 am I suppose to have a eeprom clip ? I just have the board that says 01/04.
yes eeprom clip or use the board
Audi s5 2009 reada write ok about 30 min
Porsche Cayenne 2005 Read & Write - OK
A6 3.0 tdi 2006 dash OK
Edc 16 Not OK.
Audi A4 2011 obd OK
Vw Caddy 2007 OBD OK
Opel Corsa 2004 OBD OK
Opel Meriva 2007 OBD OK
Mk4 golf obd ok
Mk5 golf obd ok
2010 passat ok
2006 a3 ok
2009 a4 ok
Passat B5 year2000 vdo,no connection.
But under golf menu are OK.
did 2008 transporter,
old mileage show ????,enter new OK
try ecu,read OK,write OK(take 10min) but still old mileage.
later done ecu with bluevag in couple minutes.
stilo 03 with cable 51 OK,
CAS2 with direct cas plug connection OK
CAS3 read crazy mileage something like 23143236,did not try to change(try just for play).
Volvo v70 2011 read write ok and mileage didn't jump back!
Golf 5 obd ok
octavia 2007 obd ok
vw lupo obd ok
astra 2000 obd ok
2008 superB obd ok
2006 Suzuki swift eeprom ok
passat CC 2009 dash OBD ok
DSG read wrong kilometer do somebody have solution for this use vcds for dsg you can reset is with vcds to 0, i
think digiprog does the same. procedure is explained here on forum i try to DSG vw passat b6,yes read wrong km but
put in 0000000
and read again 0000000!Can confirm that digi put 0km to the DSG (in Octavia at least)Just put 0 in DSG
DSG km reset with VCDS
http://www.digital-kaos.co.uk/forums/f174/dsg-km-reset-vcds-319726/
Golf 6 2011 MM5 obd ok
kienzle 1324 with adapter 47 on solder points,went fine and quickly.
ford ranger 68hc05 ok
punto 2004 obd ok
doblo 2005 obd ok
Golf 5 2006 1,9 tdi --obd OK
Focus 2007 1,8 TDCI --obd OK
Passat 2002 1,8 20v --obd OK
Mercedes A 2004 1,7 CDI -- obd OK
cables and adapters used to digipro3 tacho 2008 clone would need to know if the cable 42 of digipro is the same
tacho 2008 908
im confused...
I can confirm that EDC16 work.
I did
VW Golf 5 => ok
Audi A6 => ok but with Golf 5 menu. When i tryed with in Audi A6 menu, it didnt worked. So i readed it with Golf 5
menu, KM that was read was ok, so i changed it it worked !!!
Volvo XC90 2011 MC9s12DG128 ok as this
http://www.digital-kaos.co.uk/forums/f174/digiprog-3-clone-questions-answers-282850/index93.html#post1917197
================================================== ==============================
Cars that not work:
================================================== ==============================
You made 221 without can filter?
off course with can filter
mercedes w221 2007 cluster ok assyst ok
mercedes w164 2006 cluter ok assyst ok
astra 2010 cluster ok
bmw e60 cas by cluster plug km changed in wrong adress and red dot on cluster remain !!!
corsa c ecu eeprom direct not work
space star 2002 eeprom pointers dont work after !!!
ford connect 2002 with 912 with cable 48/2 cluster dead mcu not readable even with etl !!!
What you mean bmw e60 cluster plug?
You mean you did cas try dash plug
Cable 62 and you have dot.
Dot will desapere after 19 km.
with dp3 cas 3+ work try obd with out any problem.
cas2 with dp3 dont work i try like 11 cars no luck
e65 with dp3 obd dont work.
Freelander 2 2008 wrong calculation
the only one not on is Audi A1
jeep cherokie 2004 908as60 plug 42 not work
VW polo 2005 dash VDO not work
Audi A6 2003 dash not work
Audi A6 2005 dash work( test only if is read i not change it)
VW T5 EDC16 read km ok by OBD,write ... but km still not change,i removed ECU and mod eeprom
vw lupo 2002 with rb 4 dash not ok
get message "unknown version rb4"
try old 912 bsi 307 with this tool and now bsi dead
fiat punto 2000 read good milleage when programming is finished it says verify new milleage but milleage still the
same
Tested on Audi A4 EDC16, not working.
Ibiza 2007 dash MM with 912h256 inside, can't do by OBD
MERCEDES A-CLAS - 2000 OBD NOT OK
Tested on W212 ecu year 2010 commender not read
W211 ZGW not work
dash eeprom 95020 citroen berlingo 2012 dont work "unknown version
FIAT PUNTO 2008 OBD not work
Mercedes CLK W209 from 2003 did not work by obd.
Evo no
C-Max 2005 with 590k km both digiprog and carpog 4.01 sing - "Unknown version".
Focus (old shape) not good just checked cable and the massa is on the wrong pin after that i did not check anymore.
2004 Touran 1.9 tdi ecu km... not working, dash is ok. On ecu reads Km ok after writing new km value still old km
displayed
touran 2004 is edc16, do it manually
A6 ,4G, 2011 obd ,no success
read old km not corect
MB CLC 2009 dash plug don't work ...
Ford Fiesta 2002 via obd not work
Ford F150 2002 with HC11... N O N E S !!!! wasted time... Not working... After try connection show E R R O R !!!
F150 2002 i have do 2 weeks ago with digiprogclone and works fine. have you make wrong job
Opel Astra 2.0 DTI from 2001 with VDO, and when I try to connect with OBD cable, screen shows "unknown version
vw polo 2012 didnt work
i have make Polo 5.2012 and work
Chev Kalos / Aveo HC08 does not work on "Clone"
HC08 not work on any dash ....
tested on many
Hi guys 908 work fine on mine done many I guess you just need to know how to work it !!! Take note most of the leads
that come with it are either poor quality or wired wrong
not work with golf 6 2011 Nec 24c64
Today do Golf6 2011 Dash MM read old value ok and write ok, But dash now say: Error and not show value
Try different value and double check which version of dash is
Yes, this car work whitout dash
Q5 2012 don't work
EWS3 don't work
Ford Escape 2007, no work obd2, cable 16
error unknown dashboard
corsac obd OK
ford fokus 2002,read old km----not write new km
opel insignia obd -------not comunicate
Cable ford focus not ok.
Check with scheme or compare with other programmer.
2006 Ford fusion obd- not work
2006 VW Jettta - dash read wrong mileage (34,xxx miles )
ecu - unknown version
dsg- read wrong mileage ( 22,xxx miles)
Btw for Plug 1 am I suppose to have a eeprom clip ? I just have the board that says 01/04.
Mercedes c200 cable 8/9 no works
cas plug 35pin(black) to digi 10pin
cas plug 34pin(green-red) to digi 25pin
cas plug 26(yellow) to digi 9pin
cas plug 12(braun-black) to digi 13pin
for 48/2 i think this:
brown pin 13 gnd
white pin 7 +5v
green pin 17 Reset
yellow pin 18 BCKND
work on 307bsi,no work on rexton dash(did with carprog).more not tested.
I have read from various users that most EDC15-16 not working... Is that right? I only got one to try on...Touran
2005 EDC16 and did not work... Somebody that is using his one more often, what are your experiences? Thanks.
Have you cleared DTCs with Digiprog ?
customer called me and ask me to help him.
some guy have change S80 with clone didgiprog for him
and after he had this problem. the guy tryed to clear error but problem remain.then i tryed with ori digiprog and
dp3 and smok and smelecom and diag tool to clear error but no joy.
after spend couple days trying this and that i have extract the flash repair it and then all problem was gone.
on this forum also other members had the same problem with volvo's using clone digiprog.it damage the flash!
hi
jeep cherokie 2004 908as60 plug 42 not work
regards
dont work at all, I try with two models of boards
Megan 3 ABS, work only with ESP unit ,without ESP not work via epprom
================================================== ===============================
I'm sick
autocargo
1st April, 2013, 08:28 PM
Done today Citroen C4 year 2008 by eeprom clip. Dash and BSI works alright. Regards.
digimile
2nd April, 2013, 11:51 AM
hi
anyone try sprinter 2007 with digiprog 3....if yes need help...thanks
teerak2uk
2nd April, 2013, 03:14 PM
I think Dr Peter may have
emiliogsm
2nd April, 2013, 04:22 PM
someone with Can communication problem ? I have problem with Can based dash ...k line is ok
need solution for repair .
Shmortz
3rd April, 2013, 03:59 PM
I can confirm that EDC16 work.
I did
VW Golf 5 => ok
Audi A6 => ok but with Golf 5 menu. When i tryed with in Audi A6 menu, it didnt worked. So i readed it with Golf 5 menu, KM that was read was ok, so i changed it it worked !!!
tryed like that not working, when finished shows old km...
supersamiec
3rd April, 2013, 08:10 PM
I have problem with k-line on my Digiprog 3. On display show : NO COMMUNICATION. Cable OBD-2 is 100% good (i have 2 pcs). Maybe someone know what chips on main board are responsible for communication by k-line? 74hc125D? By CAN digiprog work great. I have made VW CC, B6+edc16, Golf V, Touran, Audi a6. Where can be the problem? Thanks for reply.
olegario
3rd April, 2013, 10:40 PM
Strange bug, neither Dp3, Nyo4 nor CPclone can't calculate mileage in Focus C-max with more than 500kkm , always get ...unknown version. Tested few times, same result.
javyb
3rd April, 2013, 11:08 PM
Strange bug, neither Dp3, Nyo4 nor CPclone can't calculate mileage in Focus C-max with more than 500kkm , always get ...unknown version. Tested few times, same result.
500km or 500000km if 500000km maybe the dash has a limit which causes it to lock at 500000km
olegario
3rd April, 2013, 11:21 PM
Here 761297km dump
briangsm
4th April, 2013, 01:32 PM
Seat toledo 99r by obd2 not show km i put new km all Ok
Octavia 2005 dash and edc16 show old km about 10min all do Ok
Audi MM 2001 dash 912 do ok on board ,edc15 vag can 1,4 do ok
RENAULT LAGUNA MODELL 2005 HCS12 work ok
Sent from my GT-I9001 using Tapatalk
digimile
4th April, 2013, 01:41 PM
hi
someone has china clone numbers on adapters like mine one has 2/50 ,2/38,2/37 etc etc but i dont understand which one is number goes in which job....hope i make any sense..thanks
batandball
4th April, 2013, 01:49 PM
forget the number 2
look at the PDF for the right car and it tells you which lead
skens
4th April, 2013, 01:52 PM
ST01 8 Pin SOIC Clip
ST04 8 Pin Dill Chip Clip
ST06 BMW OBD Diagnostic Plug
ST07 BMW Compact SW7
ST08 Mercedes Benz C Class VDO 1993/1995 ST08 ST09 ST15 ST18
ST09 VW Golf 3 MM Cluster Diagnostic
ST10 Mercedes Benz OBD Diagnostic Plug
ST11 Mercedes Benz S Class Cluster Diagnostic
ST12 Mercedes Sprinter Kienzle Diag nostic plug
ST13 Digiprog Power Lead
ST14 Audi A6 Diag 1994/1996 & ST17 Audi A6 Diag 1994/1996
ST15 ST18 VW Golf Mk3 VDO Cluster Diagnostic
ST16 OBD II Diagnostic
ST19 Mercedes Sprinter VDO Cluster diagnostic
ST20 BMW 5/7 Series Cluster Diagnostic
ST21 Toyota Avensis Cluster Dignostic
ST22 Peugeot 306 VDO Cluster Diagnostic
ST23 Jaguar XJ6 11DU 90/91/93/95
ST24 Data lead for ST16
ST25 Ford Scorpio Cluster Diagnostic
ST26 BMW 3 Series Compact SW9/10
ST27 Ford Focus
ST28 Peogeot 206 Jeager
ST29 Ford Feista Mk 3 & 4 up to year 2000
ST30 Smart car BSI
ST31 Peugeot 406 VDO Cluster Dianostic
ST32 Fiat Multipla
ST33 Alfa 156 HC11
ST34 Alfa 145/146 ST
ST35 HC11 lead this is used on sevral applications
ST36 Alfa
ST37 Jaguar XK8
ST38 Ford Couger
ST39 Peugeot 806 Citreon Synergy, Fiat ScudoCable Title
ST41 Audi MM Dash cluster lead
ST42 This lead has sevral applications
ST45 Chrysler Grand Cherokee 1999/2000 Cluster Dignostic
ST46 Peugeot 406 Jeager
ST47 This lead has sevral applications
ST49 Mercedes W203 Diagnostic
ST50 Mercedes A Class HC 12 & Vaneo
ST51 HC12 Micro lead
ST55 Jaguar X Type
ST60 W211 & W203 Cluster Diagnostic
maybe help you
briangsm
4th April, 2013, 04:54 PM
add all digiprog3 adapter photo
ST01 8 Pin SOIC Clip
ST04 8 Pin Dill Chip Clip
ST06 BMW OBD Diagnostic Plug
ST07 BMW Compact SW7
ST08 Mercedes Benz C Class VDO 1993/1995 ST08 ST09 ST15 ST18
ST09 VW Golf 3 MM Cluster Diagnostic
ST10 Mercedes Benz OBD Diagnostic Plug
ST11 Mercedes Benz S Class Cluster Diagnostic
ST12 Mercedes Sprinter Kienzle Diag nostic plug
ST13 Digiprog Power Lead
ST14 Audi A6 Diag 1994/1996 & ST17 Audi A6 Diag 1994/1996
ST15 ST18 VW Golf Mk3 VDO Cluster Diagnostic
ST16 OBD II Diagnostic
ST19 Mercedes Sprinter VDO Cluster diagnostic
ST20 BMW 5/7 Series Cluster Diagnostic
ST21 Toyota Avensis Cluster Dignostic
ST22 Peugeot 306 VDO Cluster Diagnostic
ST23 Jaguar XJ6 11DU 90/91/93/95
ST24 Data lead for ST16
ST25 Ford Scorpio Cluster Diagnostic
ST26 BMW 3 Series Compact SW9/10
ST27 Ford Focus
ST28 Peogeot 206 Jeager
ST29 Ford Feista Mk 3 & 4 up to year 2000
ST30 Smart car BSI
ST31 Peugeot 406 VDO Cluster Dianostic
ST32 Fiat Multipla
ST33 Alfa 156 HC11
ST34 Alfa 145/146 ST
ST35 HC11 lead this is used on sevral applications
ST36 Alfa
ST37 Jaguar XK8
ST38 Ford Couger
ST39 Peugeot 806 Citreon Synergy, Fiat ScudoCable Title
ST41 Audi MM Dash cluster lead
ST42 This lead has sevral applications
ST45 Chrysler Grand Cherokee 1999/2000 Cluster Dignostic
ST46 Peugeot 406 Jeager
ST47 This lead has sevral applications
ST49 Mercedes W203 Diagnostic
ST50 Mercedes A Class HC 12 & Vaneo
ST51 HC12 Micro lead
ST55 Jaguar X Type
ST60 W211 & W203 Cluster Diagnostic
maybe help you
autocargo
4th April, 2013, 05:26 PM
Has anyone done A classe W169 year 2006? Anything I should be aware of? Does it go by OBD? I'm away from my computer and don't have acces to pdf files. Thanks.
briangsm
4th April, 2013, 05:38 PM
only this and this
autocargo
4th April, 2013, 05:44 PM
Thank you briangsm. Does digiprog working good on EZS HCS12? Have you done any? I don't remember to have seen any adapter with coaxial cable in my adapters... is there one? Is it safe on this EZS? Regards.
javyb
4th April, 2013, 06:01 PM
Thank you briangsm. Does digiprog working good on EZS HCS12? Have you done any? I don't remember to have seen any adapter with coaxial cable in my adapters... is there one? Is it safe on this EZS? Regards.
No digiprog doesn't work as there is no adapter in package
bmwparts
4th April, 2013, 07:59 PM
Even if you have the adapter it still does not work.
antibisic
4th April, 2013, 08:24 PM
Even if you have the adapter it still does not work.
Original is also bad with ezs and cas
davecooper47
5th April, 2013, 12:32 AM
I have 2 digiprogs. Both work ok for OBD but one of them will not read all eeproms. One of them is fine but the other will only read 95xxx eeproms and not 93cxx or 24cxxx. I suspect there is something wrong with the buffer chips (hc125's etc). The problem is that all of the chips have had the tops ground off so I don't know which chips to change. Can someone help me with this please.
pierre renault
5th April, 2013, 05:40 PM
help me. digiprog 3 per OBD does not work! experienced in seat toledo 2000 not working
Information: ERROR NOT CONNECTION
http://www.digital-kaos.co.uk/forums/attachments/f174/190693d1365179297t-help-me-digiprog-3-per-obd-does-not-work-2000-01-16-03.08.03.jpg (http://www.digital-kaos.co.uk/forums/attachments/f174/190693d1365179297-help-me-digiprog-3-per-obd-does-not-work-2000-01-16-03.08.03.jpg)Once again, sorry correction in colors and 9-pin plug
plug 9 pins
1 whit
2 green
3 red
4 orange
5 yellow
6 not connect
7 blue
8 purple
9 gray
olegario
5th April, 2013, 05:58 PM
Vw Jetta 2008 : dash OBD - ok,
edc 1,9 OBD - unknown version,
DSG was 411k with reset got 514k ??? and no way to change back,
Service OBD - ok
Faults OBD - ok
teerak2uk
5th April, 2013, 08:37 PM
help me. digiprog 3 per OBD does not work! experienced in seat toledo 2000 not working
Information: ERROR NOT CONNECTION
http://www.digital-kaos.co.uk/forums/attachments/f174/190693d1365179297t-help-me-digiprog-3-per-obd-does-not-work-2000-01-16-03.08.03.jpg (http://www.digital-kaos.co.uk/forums/attachments/f174/190693d1365179297-help-me-digiprog-3-per-obd-does-not-work-2000-01-16-03.08.03.jpg)Once again, sorry correction in colors and 9-pin plug
plug 9 pins
1 whit
2 green
3 red
4 orange
5 yellow
6 not connect
7 blue
8 purple
9 gray
Search this thread I posted pics for changing serial connection with pin numbers the 9 pin is normally where the problem is
u.s
5th April, 2013, 09:47 PM
pin 9 is not connected mate ???
teerak2uk
5th April, 2013, 10:20 PM
pin 9 is not connected mate ???
I mean problem is normally in the 9 pin serial connection ( serial plug) not pin number 9
teerak2uk
5th April, 2013, 10:42 PM
help me. digiprog 3 per OBD does not work! experienced in seat toledo 2000 not working
Information: ERROR NOT CONNECTION
http://www.digital-kaos.co.uk/forums/attachments/f174/190693d1365179297t-help-me-digiprog-3-per-obd-does-not-work-2000-01-16-03.08.03.jpg (http://www.digital-kaos.co.uk/forums/attachments/f174/190693d1365179297-help-me-digiprog-3-per-obd-does-not-work-2000-01-16-03.08.03.jpg)Once again, sorry correction in colors and 9-pin plug
plug 9 pins
1 whit
2 green
3 red
4 orange
5 yellow
6 not connect
7 blue
8 purple
9 gray
Do cable like I did here with new serial plug
http://www.digital-kaos.co.uk/forums/f174/digiprog-3-clone-questions-answers-282850/index83.html#post1894332
pierre renault
5th April, 2013, 10:48 PM
I DID THE TEST WITH MULTIMETER CONTINUITY OF PIN 9, THE SOLDIERS OF WIRES AND PLUG OBD CONTINUED!
STILL THINK YOU SHOULD CHANGE THE PLUG OF 9 PIN?
I EXPERIENCED IN YEAR 2000 SEAT TOLEDO NOT WORKED, BUT NOW EXPERIENCED IN AUDI A3 2006 I WORKED WELL.
WHAT DO YOU THINK?
THANK YOU
teerak2uk
5th April, 2013, 11:02 PM
I changed both my obd cables 9pin connector just to be sure
batandball
6th April, 2013, 12:46 AM
Go to maplins and buy a new 9 D Way plug
batandball
6th April, 2013, 12:58 AM
Go to maplins and buy a new 9 D Way plug
like this one
pierre renault
6th April, 2013, 01:38 PM
Good day. my plug is not connected to pin 9
I think that is different from yours or have cut wires!
batandball
6th April, 2013, 02:03 PM
It's nothing to do with wiring so just wire it the same
Some 9D Way plugs just don't connect to the Digiprog machine properly
teerak2uk
6th April, 2013, 06:09 PM
Good day. my plug is not connected to pin 9
I think that is different from yours or have cut wires!
you are making this quite painful for us to help you just buy a new connector rs components, maplins, ebay and make connections like in my pictures dont worry about colours as some cables are different just make connections and check with a meter
190956190957
ignore numbers in black plastic just wire how i do numbers
pierre renault
6th April, 2013, 07:38 PM
Thank you teerak2uk
cotymoto
7th April, 2013, 09:08 AM
Digiprog 3 VW caddy 2008 read and write dash perfect, 2 min. ecu edc 16 6min read and write
xtech
7th April, 2013, 02:35 PM
Seat Ibiza 2007 magneti-mareli hcs12 plug48 all ok
briangsm
7th April, 2013, 08:23 PM
Opel Meriva 2006r about 30sec done :)
dont forget put reset on dash
olegario
7th April, 2013, 09:16 PM
tried to make Astra G 2002 with reset - no joy, later made with Opcom in seconds.
shirokov
7th April, 2013, 09:24 PM
VW Caddy 2005 - OBD OK
VW Caddy 2006 + EDC16 - OBD OK
VW Caddy 2009 + EDC16 - OBD OK
VW Caddy 2011 - OBD OK
VW Passat 2007 - OBD OK
Skoda Octavia 2008 - OBD OK
Seat Leon 2009 - OBD OK
FIAT Doblo 2006 - OBD OK
FIAT Doblo 2001 - Read milleage & info OK, but still not change. Make it with Carprog without any problem.
autocargo
8th April, 2013, 12:35 AM
Vectra diesel year 1997 by OBD and holding reset button.
bochen
8th April, 2013, 06:29 AM
Touran 2003 year dash and EDC16 OBD ok.
javilette
8th April, 2013, 11:58 AM
where is edc16 for vag group i dont have this in digiprog clone
djdanny
8th April, 2013, 12:08 PM
audi a8 2010 prepare eeprom OK
javyb
8th April, 2013, 01:17 PM
audi a8 2010 prepare eeprom OK
Did you correct mileage by OBD using digiprog after you prepare EEPROM
pierre renault
8th April, 2013, 05:08 PM
Good morning friends.
Someone can tell me how digiprog3 connects to the PC?
emiliogsm
8th April, 2013, 05:57 PM
Smart Four Two 2004 SAM with ST51 - ok
twincam
8th April, 2013, 06:17 PM
Someone tried to do with Digy Golf 5 Visteon Dash?
teerak2uk
8th April, 2013, 06:25 PM
Good morning friends.
Someone can tell me how digiprog3 connects to the PC?
I don't think the clone will from what I've read
karalada
8th April, 2013, 06:51 PM
Someone tried to do with Digy Golf 5 Visteon Dash?
Works perfectly
javyb
8th April, 2013, 07:01 PM
Good morning friends.
Someone can tell me how digiprog3 connects to the PC?
If you search forum for eetool there is a post where a member posted the software for digi to connect to pc and it works,
ovi_dk
8th April, 2013, 08:35 PM
Someone tried to do with Digy Golf 5 Visteon Dash?
work like a sharm on visteon,micronas;)
gregc83
10th April, 2013, 05:02 PM
hi
Please tell me without modification plug , digiprog (clone) will not work well?
teerak2uk
10th April, 2013, 05:14 PM
Probably better to change plug to be sure good connection
tomuch
10th April, 2013, 09:21 PM
today tested glk 2011 x204 obd work 1min job
teerak2uk
10th April, 2013, 11:13 PM
today tested glk 2011 x204 obd work 1min job
Who`s can blocker did you use?
gedas8899
11th April, 2013, 06:08 AM
Someones try to do old ford focus 98mod
for me no work error conection
insignia acces denied
tomuch
11th April, 2013, 06:20 AM
Who`s can blocker did you use?
No can bloker only ezs obd
Gesendet von meinem GT-I9300 mit Tapatalk 2
puiu
11th April, 2013, 06:50 AM
If you search forum for eetool there is a post where a member posted the software for digi to connect to pc and it works,
can you give a link please,
thanks
Puiu
JustMeAgain
11th April, 2013, 07:28 AM
Search "eetool" and don't be lazy
shirokov
11th April, 2013, 08:32 PM
Digiprog III clone K-Line Repaire Solution.
Some users have problem with K-Line communication via ST16 OBD II Diagnostic cable.
If this happens, the device shows the following: ERROR NO CONNECTION
Here's a picture:
http://shirokov.mcrf.ru/Digiprog_OBDII_error.jpg
I offer a solution to the problem. Maybe someone will have another reason, but I recommend to check.
But in a faulty devices has been found that the resistors with incorrect values.
Check your device if it is not working properly.
verica
11th April, 2013, 10:28 PM
when i by digiprog3 it is better to buy green or blue pcb
davecooper47
11th April, 2013, 10:49 PM
I don't think they'll open it up and look for you.
javyb
11th April, 2013, 11:45 PM
when i by digiprog3 it is better to buy green or blue pcb
The first one I bought had a green PCB and it had problem loading up so I sent back for exchange and the second one I received has a blue PCB and I must say have had no problems so far, so in my opinion blue PCB is better built
mislav88
11th April, 2013, 11:54 PM
peugeot boxer 2007 obd ok 1min
teerak2uk
12th April, 2013, 08:45 AM
The first one I bought had a green PCB and it had problem loading up so I sent back for exchange and the second one I received has a blue PCB and I must say have had no problems so far, so in my opinion blue PCB is better built
I presume you opened it to know it was green, I'm suprised they didn't say warranty void cos you opened it
javyb
12th April, 2013, 10:35 AM
I presume you opened it to know it was green, I'm suprised they didn't say warranty void cos you opened it
I payed a small deposit so they sent replacement out first then once I got it I sent faulty unit back
djnesio
12th April, 2013, 05:55 PM
Digiprog III clone K-Line Repaire Solution.
Some users have problem with K-Line communication via ST16 OBD II Diagnostic cable.
If this happens, the device shows the following: ERROR NO CONNECTION
Here's a picture:
http://shirokov.mcrf.ru/Digiprog_OBDII_error.jpg
I offer a solution to the problem. Maybe someone will have another reason, but I recommend to check.
But in a faulty devices has been found that the resistors with incorrect values.
Check your device if it is not working properly.
How could I know if I have a K-line problem?
With a Golf 4 dash?
Thanks
shirokov
12th April, 2013, 06:23 PM
How could I know if I have a K-line problem?
With a Golf 4 dash?
Thanks
VW Golf IV, VW Passat B5, VW Polo 6N, VW T4, VW T5, Skoda Octavia old, Skoda Fabia old, Audi A3/A2/A6/A4 old, etc.
djnesio
12th April, 2013, 07:43 PM
VW Golf IV, VW Passat B5, VW Polo 6N, VW T4, VW T5, Skoda Octavia old, Skoda Fabia old, Audi A3/A2/A6/A4 old, etc.
then now I can understand why I didn't connect with an Audi S3 8L (2000) and a A4 8E (2001). :hmmmm2:
Luckily I have the Vag-tacho and CarProg .
I will try to test with a Golf IV.
u.s
13th April, 2013, 09:17 PM
56 Lexus IS250 - 93C56 (RA57) - instructions say to take off chip and use ST01 clip using IS250 menu.
took off chip, connected clip but no IS250 menu, so used IS200 c56 menu instead and it was giving wrong reading.
tried L460 - RA57/C56 menu and again was giving the wrong mileage same as above.
put chip in labtool and used tachosoft 23.1 in the end
bochen
14th April, 2013, 09:35 AM
Toyota Yaris on board with clips -ok, Vectra B 2000 year diag OBD digi says unknown version not ok.
motorsport
14th April, 2013, 10:12 AM
there is no manual in english ???
teerak2uk
14th April, 2013, 10:22 AM
there is no manual in english ???
Use bing translator for translation and nitro PDF to change the files that's what I do
JustMeAgain
15th April, 2013, 04:17 PM
Discovery 3 2006 OBD 35080 Incorrect mileage read Actual: 119557 / 1924083 Read 2097120
Peugeot 308 2009 OBD BSI Error- assumed d-sub plug
davecooper47
15th April, 2013, 04:31 PM
Discovery 3 will not go OBD anyway. 35080 needs erasing before programming or use a new one.
JustMeAgain
15th April, 2013, 04:37 PM
Job done with Smok. Thought I would try and read.
You need to read up on carprog and Enigma's latest updates. Disco 4 too.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.