Toyota Passo 2005 - Remote programming?

[znakedwrx]

Hi guys,

I have Toyota Passo 2005 for Japanase market

Vin: QNC10-0044872
eng code: K3-VE

How to program this proximity key in?

135213

I have no problem adding small key (4c) transponder in but i cant find any remote programing proceedures for this car :(

I hope someone can answer this puzzle :)

[lashkar97]

zanked where you from . passo remote is not like as you show in picture

[technobox]

same car i have pls some body tell how to make this remote

[shitad]

zanked where you from . passo remote is not like as you show in picture


Sorry to say but YES I have seen Passo with remote like this before also.

[znakedwrx]

That`s genuine Toyota Passo remote - keyless - KFS (key free system)

This car is RHD - for JAPAN domestic market.

I haven't still find programming details for this key (remote part).
4C chip is INSIDE the card + small black key also have 4C chip.

[technobox]

yes mate but i need remote programing this car
pls help me m8s

[bram380]

try use toy orange dongle

[znakedwrx]

Transponder chip is not a problem (4c)... Remote controls (lock/unlock) are!

We dont know how to program remote in!

[technobox]

any one know this pls helppp

[znakedwrx]

I cant belive that noone knows anything about toyota / daihatsu KFS system and how to program remote in!

[lashkar97]

1. Ensure all doors are closed.
2. Ensure Ignition is OFF.
3. Disconnect battery negative terminal.
4. Within 15 seconds of disconnecting terminal, connect negative terminal and press remote control LOCK and
UNLOCK buttons, or just the UNLOCK button on some models for a minimum of 5 seconds.
5. The vehicle will LOCK and UNLOCK.
6. Then within 5 seconds press the LOCK and UNLOCK buttons, or just the UNLOCK for a minimum of 1 second
until vehicle LOCKS and UNLOCKS.
7. If programming a second remote control repeat steps 4 to 6.
NOTE : Maximum of 2 remotes can be programmed
remember u need virgin immo before program remote
push thank button if my post is use full for u
:fight::goodpost:

[technobox]

i will try and report mate thnks

[technobox]

not working mate

[znakedwrx]

Not working also :(

[richard27]

you should try it

Toyota Keyless Entry Remote Replacement Programming Corolla Camry Highlander Sienna - YouTube

[lashkar97]

not working mate
programming is tested by my self its for all new daihatsu smart keys .in toyota passo is also installed daihatsu system . if u can please remove smart box from under cluster and post picture i will check part no and connectors .

[kyawkyaw]

1. Ensure all doors are closed.
2. Ensure Ignition is OFF.
3. Disconnect battery negative terminal.
4. Within 15 seconds of disconnecting terminal, connect negative terminal and press remote control LOCK and
UNLOCK buttons, or just the UNLOCK button on some models for a minimum of 5 seconds.
5. The vehicle will LOCK and UNLOCK.
6. Then within 5 seconds press the LOCK and UNLOCK buttons, or just the UNLOCK for a minimum of 1 second
until vehicle LOCKS and UNLOCKS.
7. If programming a second remote control repeat steps 4 to 6.
NOTE : Maximum of 2 remotes can be programmed
remember u need virgin immo before program remote
push thank button if my post is use full for u
:fight::goodpost:

thanks , for your post, very useful for me. thank you thank very much, but i need to virgin file for passo key free box.help me please

[kyawkyaw]

programming is tested by my self its for all new daihatsu smart keys .in toyota passo is also installed daihatsu system . if u can please remove smart box from under cluster and post picture i will check part no and connectors .

please help dear, i need to add toyota passo smart key ,how to add new smart key, transpoter chip with 4c,
thanks you very much ,please reply.