PDA

View Full Version : GRAND CHEROKEE 5.2 V8 1996 IMMO OFF????



ChipDoctor
7th September, 2012, 11:43 AM
Hi guys

I have one ECU of Grand Cherokee Limited 5.2cc V8 petrol 1996 model

The information of the Ecu is:JBB0E1W0
P56041
T0926 264
ZBYAB

How to remove IMMO from this ECU????

This car have remote control for the immo and the immo located on the driver's door left, together with the switches for the windows
Give me a help guys!!

Best Regards!!!

toximatic
7th September, 2012, 11:54 AM
I do not know if this car has an immo off solution. If i wanted it to start i would go for the vin2pin solution and program a key.
N sure it would be more better if a respectful Dk memberposts a dump.

Please post your eepom dump here.does the immo box have any eeprom or flash?
Regards

ChipDoctor
7th September, 2012, 12:13 PM
I do not know if this car has an immo off solution. If i wanted it to start i would go for the vin2pin solution and program a key.
N sure it would be more better if a respectful Dk memberposts a dump.

Please post your eepom dump here.does the immo box have any eeprom or flash?
Regards

I do not know which is the eeprom of immo
I don't know anything for this ECU

toximatic
7th September, 2012, 12:23 PM
I have checked pictures you posted.
As long as you are not able to identify the data chip or do not have suitable software with kline to read / write data then the immo off solution you are asking for aint suitable for your situation. Post a topic on immo section or find vin to pin tqppic and post your vin to get the pin code. Sbb clone can code u a key.

datapage
7th September, 2012, 12:42 PM
immo off cherokee , 2 eprons

jaelgti
7th September, 2012, 01:20 PM
When time proves this solution.
Thank you very much.

ChipDoctor
7th September, 2012, 01:24 PM
immo off cherokee , 2 eprons
Hi friend

These files will work on my ECU???(Ecu is:JBB0E1W0
P56041
T0926 264
ZBYAB)
I will replace the files and I'm ready or needs something else
This car have remote control for the immo and the immo located on the driver's door left, together with the switches for the windows

Thanks!!!

toximatic
16th September, 2012, 06:17 AM
Did it work ?
Please report

ChipDoctor
16th September, 2012, 01:47 PM
Did it work ?
Please report
Hi my friend

I could not do anything
The car he left out of my hands and went to the dealership to find the solution

ChipDoctor
7th October, 2013, 06:47 PM
immo off cherokee , 2 eprons
Hello my friend

I have one ecu the same as the photo from the post but is from Dogle Durango SLT 5.9
The number is: MOTOROLA S/N 11C0857PQU05
CHRYSLER P/N P56046 366AH
MODULE S/N TEM 1558PQU05
This engine will go to a car that is for racing
There is no immobox but nor and KEY
Can you help me to remove the IMMO or if you know if I can use emulator for this ecu ???
223296

Best Regards!!!!

mcgywer
24th November, 2013, 04:26 PM
Hi,
i need to changer ECU in Jeep Laredo 2000 4.0 L petrol.

Ecu number:
Motorola S/N 70A168CQMJQ
P/N P56041
637AF

I have swaped Intel AB28F200 and Motorola MCU with are marked on picture but immo light is still on.

Any idea?

Regards
Mat

mcgywer
25th November, 2013, 10:11 AM
Any ide how to clone that ECU?

mcgywer
27th November, 2013, 03:09 PM
Hi,
i need to changer ECU in Jeep Laredo 2000 4.0 L petrol.

Ecu number:
Motorola S/N 70A168CQMJQ
P/N P56041
637AF

I have swaped Intel AB28F200 and Motorola MCU with are marked on picture but immo light is still on.

Any idea?

Regards
Mat

keymaker.gr
9th February, 2014, 10:15 AM
immo off cherokee , 2 eprons

I also have an ecu to immo off.......what i need to do in order to immooff and work the vehicle without a remote ??

Thanks in advance

keymaker.gr
11th February, 2014, 08:29 AM
hmhhm i need new ecu.......does anyone knows where to buy a used one ????

locks85
21st February, 2014, 05:55 PM
hi immo is only in motorolla not in flash inside ecu from post 13

keymaker.gr
21st February, 2014, 06:47 PM
can you help to immo off please ?

MEDeone
13th December, 2016, 09:31 AM
HI I WANT THE IMMO OFF PLZ

MEDeone
13th December, 2016, 09:39 AM
plz i need immo off of

dariobmw
2nd January, 2017, 10:35 AM
loks85 is right but the processor is not the BIG one motorola to be reprogrammeb but is the little on the left ,
you need to reprogramm with the file provided by a good member here on DK and the car will start without
emu or detach nothing

vasko
4th January, 2017, 07:28 AM
no need to reprogram any ecu's
i will post pictures how to disable alarm
need connect only 1 wire from bcm to gnd..
tested 2 times and work.

vasko
14th February, 2017, 05:47 PM
bcm
find bcm 2 plugs
you will seen 1 wire yellow-pink....bare this wire and put go gnd...and will start
..not open any ecus........
remove driver door cover and you will seen this wire to driver door module yellow/pink...for sure cuting....check with multimeter wire from bcm to dr.door...

vasko
14th February, 2017, 05:56 PM
this rule only 1996...
if car 1995 other type alarm
located rear right panel
and when start car remove board immideately...i test and this work

wieslov
24th July, 2018, 09:29 AM
please enter the pin number of the plug bcm

snecii
5th November, 2020, 04:24 PM
bcm
find bcm 2 plugs
you will seen 1 wire yellow-pink....bare this wire and put go gnd...and will start
..not open any ecus........
remove driver door cover and you will seen this wire to driver door module yellow/pink...for sure cuting....check with multimeter wire from bcm to dr.door...

Hy
Would you help me with this?

enginbahadir
1st April, 2021, 04:15 PM
bcm
find bcm 2 plugs
you will seen 1 wire yellow-pink....bare this wire and put go gnd...and will start
..not open any ecus........
remove driver door cover and you will seen this wire to driver door module yellow/pink...for sure cuting....check with multimeter wire from bcm to dr.door...


Hello, I need your help please. How is work? Do u have pictures