carprog and Laguna 3

[wadim21]

Realy carprog original can reflash dash laguna3 like dp3? No need can filter

[newgeniehex]

ello
can prog can do cange the mileage via obd in the dash if you put the can filter
carprog cannot do bloc the synchro via OBD
only dp3 and smoke tool have this fonction!!maybe avdi too
regard

[wadim21]

Carprog can only change milleage in dash via obd.without blocking synchro with Abs.yes?

[newgeniehex]

Carprog can only change milleage in dash via obd.without blocking synchro with Abs.yes?
ok
you can change the mileage via obd whitout can filter
exemple
original is 123000KM after you put new mileage exemple 34000km but in the display you find the mileage of abs
if you try to read again the mileage on the dash via obd you find 34000km but in the display you find the mileage of abs!!
for find the good value in the dash you must to put a can filter or kill the synchro via obd!!!
you undestand me
regard

[andy99]

Carprog orig
1 Disconnect the ABS
2 corrected mileage
3 Turn on IGN
4 Carprog write Flash (30min)
5 Turn off IGN
6 connect ABS
All Done

[stevan]

Carprog orig
1 Disconnect the ABS
2 corrected mileage
3 Turn on IGN
4 Carprog write Flash (30min)
5 Turn off IGN
6 connect ABS
All Done

I have update my carprog to Full and would be glad to be able do Laguna III and other Renault with ABS.
just to ask andy99 ,do you connect backup suplly to battery of car?

[solitaire]

Carprog orig
1 Disconnect the ABS
2 corrected mileage
3 Turn on IGN
4 Carprog write Flash (30min)
5 Turn off IGN
6 connect ABS
All Done


where you found this guide?


from codecard:
Megane III 2009+ odometer, EEPROM read/write by OBDII ( before change odometer install CANEMU filter (http://www.codecard.lt/dash/mercedes-w212-w221-w164-w204-and-renault-laguna-iii-megane-iii-scenic-iii-can-filter/prod_431.html));
Laguna III 2008+ odometer, EEPROM read/write by OBDII ( before change odometer install CANEMU filter (http://www.codecard.lt/dash/mercedes-w212-w221-w164-w204-and-renault-laguna-iii-megane-iii-scenic-iii-can-filter/prod_431.html));
Renault Megane III, Laguna III, Kangoo 2010+, Koleos by OBDII (http://www.codecard.lt/carprog/software/carprog-dash/renault-megane-iii-laguna-iii-koleos-by-obdii/prod_614.html)

[wadim21]

i think need last update for it

[solitaire]

i think need last update for it

in the official website is no single word about reflashing, just about CAN filter.
Maybe you mean X-TOOL (X-TOOL - home (http://www.x-tool.eu/page1.php))?

[wadim21]

Carprog v5.31 i think can do it

[newgeniehex]

i think need last update for it
HELLO
i have carprog original
carprog cannot do make the ABS actually!!
don't think !!!go to carprog weeb site !!!!
you can find only:


from codecard:
Megane III 2009+ odometer, EEPROM read/write by OBDII ( before change odometer install CANEMU filter (http://www.codecard.lt/dash/mercedes-w212-w221-w164-w204-and-renault-laguna-iii-megane-iii-scenic-iii-can-filter/prod_431.html));
Laguna III 2008+ odometer, EEPROM read/write by OBDII ( before change odometer install CANEMU filter (http://www.codecard.lt/dash/mercedes-w212-w221-w164-w204-and-renault-laguna-iii-megane-iii-scenic-iii-can-filter/prod_431.html));
Renault Megane III, Laguna III, Kangoo 2010+, Koleos by OBDII (http://www.codecard.lt/carprog/software/carprog-dash/renault-megane-iii-laguna-iii-koleos-by-obdii/prod_614.html)

[wadim21]

look this pictures

[solitaire]

maybe you're right, but I think you need to have correct flash file to write it.

[andy99]

Yes with last Update for 5.31
I did Megane III

to Stevan yes of course

[newgeniehex]

look this pictures
hello
sorry! i don't have this option in my carprog
i use smok toll for this dash and abs!!
and it is strange i find nothing in the weeb site???about abs
regard

[spychu14]

Every tools writes to dash modified flash and dash don't rewrite old KM's from ABS. There's no solution to change KM in ABS by obd. Only open ABS and edit eeprom.

Only difference is you don't need to use can blocker.

[olegario]

Smok can flash the dash too? (like carprog)?