Vito Mask 1L02M with R270

[alimmo]

Hello Folks,
Can some please confirm from experience if the R270 works in-circuit with the Vito key module 908 mask 1LO2M.

Many thanx

[ION CRISTI]

yes it work. in situation apear error you must lift pin 2 motorola

[ALEXEI]

work with upa like a charm. why to use an useless shit programmer which is not even a clone

[darius89]

Pleyed oll day with upa, r270, carprog, x-prog........
and nothing :( Same situation was with s class same mcu.

[alimmo]

Pleyed oll day with upa, r270, carprog, x-prog........
and nothing :( Same situation was with s class same mcu.

I dont think this is the same mask as the s class mate its a 1LO2M

can someone else please also confirm ?

thanks

[benzstop]

s class is 4j74y if it is 908, can also be 705 in sclass. r270 tested and works but never tried with vito

[alimmo]

anyone else tried it on the vito ???

[koba]

Hello,

i tried and work only read (lift Pin 2 IRQ) , write dont work, with Xprog read and write ok.

[alimmo]

Hello,

i tried and work only read (lift Pin 2 IRQ) , write dont work, with Xprog read and write ok.

I have xprogm can you tell me exactly which mask you selected as it doesnt have 1LO2M and also did you do it incicuit also what wire up diagram you used

Many thanks

[koba]

I read as 1L52H (68HC08AZ32A), others here in the forum read as 3K85K (68HC908AZ60A) you can try both and save. I read and write as 1L52H. And have only 5 cable soldered
2-IRQ
3 RESET
21-VSS
22-VDO
26-PTA0
SS: DA,A7,E5,27,E5,27,E5,27,
DA,AC,E5,2C,E5,2C,E5,2C,
DC,A0,E7,20,E7,20,E7,20,
DC,A6,E7,26,E7,26,E7,26,
DF,C8,EA,48,EA,48,EA,48,
A7,05,A6,58,A6,58,A6,55

[alimmo]

I read as 1L52H (68HC08AZ32A), others here in the forum read as 3K85K (68HC908AZ60A) you can try both and save. I read and write as 1L52H. And have only 5 cable soldered
2-IRQ
3 RESET
21-VSS
22-VDO
26-PTA0
SS: DA,A7,E5,27,E5,27,E5,27,
DA,AC,E5,2C,E5,2C,E5,2C,
DC,A0,E7,20,E7,20,E7,20,
DC,A6,E7,26,E7,26,E7,26,
DF,C8,EA,48,EA,48,EA,48,
A7,05,A6,58,A6,58,A6,55



Many thanks for the info buddy also can you please tell me "how and where to insert the data you provided, i take it as this is security data to read or write this locked mcu"???

Regards.

[davecooper47]

Used R270 on 1L02M today. Read and write perfect and very fast.

[i_shot_the_sheriff]

Tried with R270 and it won't read it .
I used ETL programmer and read it as 1L52H and works 100% . Read + WRITE functions all ok.

[i_shot_the_sheriff]

Tried with R270 and it won't read it .
I used ETL programmer and read it as 1L52H and works 100% . Read + WRITE functions all ok.

[davecooper47]

R270 works perfect. No pins need lifting. UPA also works perfect. No pins need lifting and no security bytes needed (most of the time). I must be the luckiest vito programmer on DK?

[smayer]

I can confirm, r270 works perfect in this mcu, don?t need any lift, just use the same connection as 4j74y (connect mcu pin 59).

[geeroam]

Anybody use r270 to read vito ezs with 4j72y? 1l02 works like a charm

[i_shot_the_sheriff]

R270 works fine with VITO EZS with 4J74Y

[geeroam]

How do you connect? i used 1l02 wiring scheme does not read help please