PDA

View Full Version : 057-910-409-BVN1/2 VCDS label DPF coding


gixxer
10th February, 2013, 10:47 PM
Hello
I need a 057-910-409-BVN 1-2 label file or Audi A8 4.2 new DPF coding.
Thank You Very Much
Ashraf6119
10th February, 2013, 11:02 PM
Hi

Are you asking for some kind of info that how to reset DPF using Vag-Com or, is it something else
gixxer
10th February, 2013, 11:22 PM
Hi

Are you asking for some kind of info that how to reset DPF using Vag-Com or, is it something else


I like reset DPF parameters with Vag-Com(VCDS)
Sorry bad english!
Ashraf6119
10th February, 2013, 11:34 PM
Have a look in here.............


Diesel Particle Filter Emergency Regeneration - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Diesel_Particle_Filter_Emergency_Regeneration)


3.0l V6 TDI (BKS/BMK/BUN) - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/3.0l_V6_TDI_%28BKS/BMK/BUN%29#Particle_Filter_Emergency_Regeneration)
gixxer
10th February, 2013, 11:44 PM
Have a look in here.............


Diesel Particle Filter Emergency Regeneration - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Diesel_Particle_Filter_Emergency_Regeneration)


3.0l V6 TDI (BKS/BMK/BUN) - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/3.0l_V6_TDI_%28BKS/BMK/BUN%29#Particle_Filter_Emergency_Regeneration)

Thanks I seen ago wiki but no find Particle Filter Load reset adaptation for Audi A8 4.2l ... (I not like regeneration)
Ashraf6119
11th February, 2013, 12:13 AM
That's the only way to carry out DPF reset while doing this if the ECU finds DPF is clean it will reset every thing on its own..........

And if it finds the DPF is blocked it will not let you reset..........

So carry out this Regen Option and you should be fine.....

You only need to make sure there are no any other fault code.........such as DPF Temperature Sensor, or DPF Pressure Sensor Faults............

Basically there should not be any fault code stored in Engine ECU.......
gixxer
13th February, 2013, 05:21 PM
That's the only way to carry out DPF reset while doing this if the ECU finds DPF is clean it will reset every thing on its own..........

And if it finds the DPF is blocked it will not let you reset..........

So carry out this Regen Option and you should be fine.....

You only need to make sure there are no any other fault code.........such as DPF Temperature Sensor, or DPF Pressure Sensor Faults............

Basically there should not be any fault code stored in Engine ECU.......


Thanks again , problem solved.
11-Engine II--->coding II--->10016 regen run after few minutes DPF light off. :D