toyota passo/daihatsu sirion 1.3 4 cyl engine with smart key

[felix17popa]

got a toyota passo with all keys lost, this is the one with smart key.
Immo or key free ecu is located behind dash, side of the steering wheel, under dash corner vent duct and tighten with two bolts on the dash reinforcement bar. Eeprom is Microchip 93lc66B. I have used tpx1 head and tmpro toyota 4c module from tmpro2. All went well, cut a key blade from driver door lock , actually I changed lock combination as security measure. Nothing need to be done on ignition lock!
Car stared straight away. Next step of course would be to get anotehr smart key and to add that in to the system...

[shitad]

Zedbull clone with module 105 does this also :laugh:

[gwee]

Zedbull clone with module 105 does this also :laugh:

Yes my friend, but he doesn't use zedbull. :)

[achaccha]

Dear Felix.
From what year is this car? may be that it is a 4D key smart key. please can you post a picture of the immobilizer ecu as also the file?
'll try to help.
regards

[gwee]

car already started!

[technobox]

this car 4c smartkey mate post ur dump i ll send u virgin immo dump


Sent from my iPhone using Tapatalk

[gwee]

this car 4c smartkey mate post ur dump i ll send u virgin immo dump


Sent from my iPhone using Tapatalk

Hi m8, his car already started. Also, he is having the fresh virgin dump, not the reset dump.

[technobox]

good mate :)))


Sent from my iPhone using Tapatalk

[Helvio91]

Hello sir i have passo with smart key i want virgin dump please

[Brayn]

Hello sir i have passo with smart key i want virgin dump please
Post your dump.... [emoji4]

Sent from my C5502 using Tapatalk

[Helvio91]

Dump from engine ecu or immo box ecu?

[Brayn]

Dump from engine ecu or immo box ecu?
Immo box

Sent from my C5502 using Tapatalk

[Helvio91]

Ok ill post tomorrow morning thanks brayn

[Helvio91]

Brayn my passo have key and one mechanic play with steering lock and the car stop recognize the key

[Brayn]

Brayn my passo have key and one mechanic play with steering lock and the car stop recognize the key
When you insert key what happen to immo indicator???

Sent from my C5502 using Tapatalk

[Brayn]

Passo key hole (push knob ignition) have 2 micro switches
1. Key detection switch
2. Push knob detection
These both switches should be on for open steering lock and immo light goes off


Sent from my C5502 using Tapatalk

[Helvio91]

Upper switch its fine other is damage but i bridge that 2 wire and the immo light still flash

[Brayn]

Upper switch its fine other is damage but i bridge that 2 wire and the immo light still flash
When you insert key is it genarate beep sound or not??
If beep sound comes that mean key insert detection switch good
If switch not good
1. Insert key and bridge that switch

Sent from my C5502 using Tapatalk

[Helvio91]

When i insert the key no beep at all i already bridge the switch and immo light still flash, i put easy checker on antenna and the coil is not working

[Brayn]

When i insert the key no beep at all i already bridge the switch and immo light still flash, i put easy checker on antenna and the coil is not working
What is the manufacturer year??
Sometimes it can remove immo

Sent from my C5502 using Tapatalk

[Helvio91]

Its 2006 year model, ecu n-89560-b1010

[Brayn]

Its 2006 year model, ecu n-89560-b1010

You can try to remove immo
I will send you dump file
Write my file to engine ecu RA57

Sent from my C5502 using Tapatalk

[Helvio91]

Ok mate ill try, send me please

[Helvio91]

Hi brayn please send me the file

[Brayn]

write this dump to Engine ecu and try
don't think about immo indicator
RA56 chip engine ecu inside

[Helvio91]

ok ill do today and let u know.thanks

[Helvio91]

Hi bryan cant write that file u send me got message bad file size

[kyawkyaw]

write this dump to Engine ecu and try
don't think about immo indicator
RA56 chip engine ecu inside

hello fri, can you help me passo immo off rar, please passward, thanks for very useful

[kyawkyaw]

hello, all dk fri, please help me some one,toyota passo with smart key all key lost. now i need to add key , i tried but cannot add a new key please help me

please help me passo with smart key , immo box 93lc66 and ra 57 dump file. car model year 2009

[spanaz1]

please help immo off toyota passo 2004 with smart key, here dump from immo box 93lc66b

[ngomakennedy]

write this dump to Engine ecu and try
don't think about immo indicator
RA56 chip engine ecu inside

Brayn Hi. Kennedy is my name, i am new in key programming . does this immo off file work for 2004 toyota passo using 93lc66B chip in immo box. should this be written in immo box 93lc66B chip or in ECU which has RA57 chip 8 pin. However i would also like to find out how i can read this chip as i could not find RA57 on the xprog 5.6 reader am using. basically i need to know whether this can be read as 93lc66B or as what. My whatsapp line is +260955523651 and +260979523651. email ngomakennedy@yahoo.com . i have bben trying to follow your posting and people appreciate your help. May i end by appreciating your help in anticipation. Thanks


i can send you mail with an attachment of my dump from immo box chip 93lc66 if needed