PDA

View Full Version : vw golf 1.4 pin



actionx
26th June, 2013, 12:21 PM
Hi guys i have a vw golf mk1 shape 1.4mp9 with shurlok system and sticker on ecu also say shurlok 17s 906 258s the problem is the customer brought the car here with 2 ecu's now the car starts and cuts so key is not programmed. The key light is not flashing but alarm is going off it will start and cut so here is file in cluster 93c86 need a pin to see if i can try program this thing. Is there a way to bypass or immo of shurlok

actionx
27th June, 2013, 07:31 AM
bump .............

actionx
27th June, 2013, 11:18 AM
apparently my dump is faulty does someone have a dump for 1.4 i just loaded a dump from another vw and now immo light flashes but error code in cluster engine ecu because wrong file

tawaf11
27th June, 2013, 11:36 AM
your pin :00257

actionx
27th June, 2013, 11:55 AM
thanks
tawaf11 (http://www.digital-kaos.co.uk/forums/members/339104-tawaf11/) i was told there is no keys in my dump. immo light dont flash but when i load another file i got from dk just to test then it flashes but fault code in instrument cluster ecu not matching so need file for 1.4 golf mk1 shape

tawaf11
27th June, 2013, 12:02 PM
more info uce eeprom

actionx
27th June, 2013, 12:22 PM
Hi tawaf the ecu is south afican its shurlok system 17s 906 258 s immo sits in the dash so i just need correct file for 1.4 golf 93c86 i used this file i found on the forum thats attached the pin is 3690 if i program it with supervag the immo light stops to flash and operation ok but when you turn ignition off and on it flashes again if i read in tango the key its lock again.
With original 93c86 file i posted in post 1 the immo light doesnt flash and car starts and cuts out.

tawaf11
27th June, 2013, 01:46 PM
try this dump with golf 1.4

actionx
27th June, 2013, 02:09 PM
thanks will give it a try

actionx
27th June, 2013, 02:24 PM
if i do open this file in tango under vw 93c86 gives me invalid file size

tawaf11
27th June, 2013, 02:32 PM
ok this dump isnt same with car . this dash a look firs time friend

actionx
27th June, 2013, 02:47 PM
i tried that file and nothing this golf 1.4i mp9 system

actionx
27th June, 2013, 03:11 PM
here is two files also from same golf i got but also when i load them key light doesnt flash its weird

daniersms
27th June, 2013, 04:23 PM
Just a question -- why dont you remove the immo from the MP9 ecu.If you need it I can help you

actionx
28th June, 2013, 07:23 AM
i would love to do that this is a shurlock system immo in cluster

deondti
19th March, 2014, 08:42 PM
The MP9 ECU is BOSCH........
The new Velocity Golfs have a different ECU(South African) , slightly gold in colour and smooth round edges. T6 transponder
The Bosch MP9 ECU is alu with fins.

Regardless of ecu.
The VW velocity key is coded to the cluster - alighned to black shurlok control module - alighned to Engine ECU
Change any one of them and the car will start, run for a few seconds and die.

I hope this helps

PierreTheron
14th April, 2014, 06:29 PM
Post here st10F269 File from ecu and i will give pin code .

audivwauto
14th April, 2014, 06:55 PM
what year modle is the golf ? is it Mp9 ecu or a surlock ecu ?if its a surlock ecu you will need to alighn to the new cluster