Pinout Nissan Pathfinder - MC9S12H128 - 2007

[hackbest]

hello someone has the pinout Nissan Pathfinder - MC9S12H128 -2007 to x-prog thanks and greetings

[andersonmaxi]

here is pic
good luk

[hackbest]

Hello this pinned think it lacks the vdd and I can not read someone can lend a hand thanks and greetings use the xprog

[andersonmaxi]

have u tacho pro v2008 ???
if yes its very easy to read and write

[hackbest]

I have not only xprog

[afitijuana]

post a good picture from the back of you cluster.

[miketesla]

i try with my tacho pro 2008 this cluster 2005 nissan xterra 9s12h128 with no results, wont read or write, i used a 34 dongle cable, nothing change i hook up the wires in the correct spots, like your picture above, some one can help me

[miketesla]

afitijuana you may be right when you mention about the tacho pro 2008 not work 99% with the nissan pathfinder 2005 mc9s12h128vfv processor with the 4 pin connector, i try more the n 20 times with out results, wont read and write, i put the pins correct, i may need to find something decent upa or the omega, i dont want brake my head with this tacho pro 2008,

[FxShaw]

Try this..this should work

[miketesla]

thanks for the reply, ill will try asap, thanks again fxshaw

[miketesla]

fxshaw this dump as to be with the dongle 34 9s12 2 green cables 1 is bkgd bdm and 2 reset and blue 5 volts and black ground, red 12 volts not connected or the dongle 35 9s12 with 2 black grounds and 3 blue 1 bkgd bdm, 2 reset, 3 5 volts, red and yellowm and green cables not connected ? thanks for your help

[FxShaw]

2= Reset
3= 5+
B= GND
1=Bkgd


This is all there is to it...connect it correct and it will read...did 2 of these last week.

[miketesla]

thanks for your help

[Jp4ubaby]

Thanks for info fxshaw, i tried tacho pro 2008 so many times dont work 370181


Sent from my iPhone using Tapatalk

[Jp4ubaby]

Which cable # did u use miketesla.


Sent from my iPhone using Tapatalk

[epd1221]

Try this cable setup .. Might work

[Jp4ubaby]

Thanks will try and post back.


Sent from my iPhone using Tapatalk

[Jp4ubaby]

2= Reset
3= 5+
B= GND
1=Bkgd


This is all there is to it...connect it correct and it will read...did 2 of these last week.

How does this work on digiprog 3 clone.
Reset
5V
GND
BKGD

thanks man because my tacho pro none cant read or write.

http://uploads.tapatalk-cdn.com/20160517/f9082936f610696f42ab158fce29ca76.jpg

[clusters]

Yours is a little different from the others.

Try this, I even put digi colors for you. Use ST48 :)

[Jp4ubaby]

Yours is a little different from the others.

Try this, I even put digi colors for you. Use ST48 :)

I got different colors of digi http://uploads.tapatalk-cdn.com/20160517/80091ed247825079418e8f4eff935b86.jpg

Red = reset
Brown = black
Orange = yellow
Black = 5v

Not sure this correct color code. Please confirm. With tacho pro i get a sound coming from cluster when trying to prog and stops and tacho say ERROR

[clusters]

Didn't I post this for you before? :banghead:

You should rewire your cables to the right colors! Use a meter to check at the DB25 pins and wire them to the correct colors so they are useful.

[auto car]

i have same proplem with nissan qashqai can some one send me photo for pin out from digiprog

[mushroomhead128]

have u tacho pro v2008 ???
if yes its very easy to read and write
can you help me out for this same car for a nissan path with the tacho pro 2008 i got some nissan path 2005 and 06