best tool to read motorola hc705

[large12390]

hello all
need help m witch tool is the best with motorola 705 like 0g47j or 1d69j
etl orginal or copy
omega
oring5
x progm orginal or copy
?????
becuse i thinking about x progm is cheaper my fraind told me its demge cpu when u read with
regards

[912secured]

The x-prog-m need good external adaptor (tried to read and write 05 from a saab 100 times worked fine on clone 12v 2a). If you can get a etl, I would use the etl,never had one problem anything secured do not read in spot.

[wahye]

xprog + modification wiring diagram
Regards

[igorr]

I use etl clone couple year and work perfect

[kazikk]

i have used ETL for long time - never had any problem,
Now i'm using AK500 - because have qfp64 adapter :)

[kazikk]

i have used ETL for long time - never had any problem,
Now i'm using AK500 - because have qfp64 adapter :)

[keygargoil]

omega mtrk and orange 5 has never let me down it reads every time and doesnt corrupt data

[AlexandruP]

I'm using XPROG-M clone with QFP64 Adapter many times without problem

[Pop45398]

I have an XPROG-M 5.0 Chinese clone and it reads, writes, and verifies HC705X32 (0G47V) 100%, in circuit or out of circuit, via USB or serial, with or without AC adapter. I now have a cable wired to my AAM and can connect my XPROG while the AAM is still in the vehicle, just flip open the fuse box cover and plug in my XPROG. Before ever using my XPROG I did the 100k resistor mod here: http://www.digital-kaos.co.uk/forums/f155/xprog-05-705-don-t-write-repair-205982/index2.html#post1112942.

[Pop45398]

@ray-ray,

Here is my '99 ML430 AAM 163 545 37 32 with the ICP solder points labelled. The points labelled in yellow are listed as optional in the XPROG manual (I later discovered they are not needed for my AAM).

[duroarg]

hello there!..do you know if there's a soder points guide for xprog or upa to change km on dashboards?
Thanks in advance!