mileage 2012 bmw 528i cas4

[samyboy]

hello every one can somebody please correct mileage for me in this 2012 bmw 528i with cas4 9s12xep100

this file have 51459 km i need 36500km

[PremierD]

Try this mate ....

[samyboy]

thanks for your help PremierD but mileage jump back in speedometer to original as soon I connect cas4.so I guess those are not the mileage location . any other suggestion?

[tech_cz]

Drive the car several miles and read it again.
Then we can see.

WBR, Marek

[samyboy]

hi this another file from another bmw 2012 750i with 67190km so you can compare

[tech_cz]

Here you are zero km.
I hope I did not forget any place.
Let me know.

WBR, Marek

P.S. pass PM

222593

[rukartinatv]

How you did cas4 5m48h?

[peko]

hello every one can somebody please correct mileage for me in this 2012 bmw 528i with cas4 9s12xep100

this file have 51459 km i need 36500km

hi friends

how you read cas4 ?

[vokinn]

Hi mates
I have a customer with 520 registered 07/2011 to do mileage would it be cas 4 with 5m48h?

[samyboy]

Hi mates
I have a customer with 520 registered 07/2011 to do mileage would it be cas 4 with 5m48h?

most probably yes 07/ 2011 that meen 2012 I guess

[samyboy]

Here you are zero km.
I hope I did not forget any place.
Let me know.

WBR, Marek

P.S. pass PM

222593
thanks you very much Tech_cz it worked with 0000km then it took mileage from speedo

[vageric]

thanks you very much Tech_cz it worked with 0000km then it took mileage from speedo

can you tell us how you have read the cas 4?

[diagnoza_auto2000]

X PROG (original) ,NEW J TAG from SMOK are tools wich test and read this XEP100 completely not like CODIPROG

[vageric]

yes i know about x-prog and J Tag.
but it seems that some people asking for help and when they get help
they dont want to give info to others.

[peko]

X PROG (original) ,NEW J TAG from SMOK are tools wich test and read this XEP100 completely not like CODIPROG

is stable same as rosfar tool ?

[samyboy]

this is what i use to read new cas4 with 5m48h
www.carctools.ru but still some glishes with software developer told me to buy some 5m48h for back up in case i dammage processor

[tito2002]

Need also help to clear mileage from cas4 unit (XEP100)
520d y20111

Thank you

[TULGEYWOODMAN]

this is what i use to read new cas4 with 5m48h
www.carctools.ru but still some glishes with software developer told me to buy some 5m48h for back up in case i dammage processor

Please can you tell me which tool you used on that website ?

I cannot see tool for 5m48h?

thankyou

[rukartinatv]

Please can you tell me which tool you used on that website ?

I cannot see tool for 5m48h?

thankyou

USProg v04 (http://www.carctools.ru/en/shop-u/shop-u-2/for-repair/usprog-v04)

[tech_cz]

Here:

243080

WBR, Marek

[peko]

USProg v04 (http://www.carctools.ru/en/shop-u/shop-u-2/for-repair/usprog-v04)

this it not erase flash when you write eeprom ?

[rukartinatv]

Its work like 80%
The owner say.
i know people who have usprog from 10 cars 2 dflash erazed.
but you can fix if you have motorola new 5m48h processors.
when you read dflash its will not erazed only when you wright.
all cas4 from late 2011 and yearly 2012
Possibility the dflash will be erased 50/50.
When you read dflash more the 15 cek you have to stop the process.
thank you

[samyboy]

so far I did about 10 of those cas4 with 5M48h , and I had problem with 2 of them first one I got some error when I am reading so I stop everything I put back cas4 and car started , the other it was hell on earth Dflash erase it took me like to weeks to be able to find the right flash for that cas 4 then I hade to reprogramme the whole car with ISTA P

[rukartinatv]

so far I did about 10 of those cas4 with 5M48h , and I had problem with 2 of them first one I got some error when I am reading so I stop everything I put back cas4 and car started , the other it was hell on earth Dflash erase it took me like to weeks to be able to find the right flash for that cas 4 then I hade to reprogramme the whole car with ISTA Pdflash was erased when you read?
or wright?

[samyboy]

Part of d flash , page 2 was erased

[TULGEYWOODMAN]

Part of d flash , page 2 was erased

you didnt tell me which tool you used on the carcleaner website?

[rukartinatv]

you didnt tell me which tool you used on the carcleaner website?
there is only one tool for cas4 usprog

[rukartinatv]

Part of d flash , page 2 was erased
was dflash erased when you read?
or when you try to wright back?

[tito2002]

to Marek


Thank you

[TULGEYWOODMAN]

there is only one tool for cas4 usprog

now I now that and You know that,
but in post number 16, does Samyboy not say......... "this is what i use to read new cas4 with 5m48h
www.carctools.ru "

[peko]

crash when you write it ! if crashed ista can't solved it, you must replace cas4 or mcu
and lot of crashed ...

[samyboy]

CRASHED WHEN READING ,
ISTA p CANT FIX , car is completely dead no ignition ,

[rukartinatv]

I know usprog fix some problem with erased 5m48h
he told me that now its work more stable.
Samyboy what year of the car that
dflash was erased.
How long its take to read dflash with
usprog?
Thank you

[samyboy]

it was 2011 rolls Royce Ghost with Cas4 5M48H .
it doesn't take really long at all , about 30 sec or so .
me personally I like it I have confidence in that machine

[rukartinatv]

You right.
I order last week this programer.

[dataprog]

What is the name of this programmer
Please

[samyboy]

read from beginning and you will be surprise

[rukartinatv]

What is the name of this programmer
Please

Are you joke?
or you just read the last post?
read from post one till the end.
its not cheap programer
its not for beginners he dont provide any support
manual only.
but the tool work like 90%

[Auto Clinic]

i need 0 km fot this cas4 3146km

[rukartinatv]

You read with usprog?

[Safety]

i need 0 km fot this cas4 3146km


whice programmer using. I m use Codiprog USB MKII but it support latest 1143v.

[smartymarti]

You actually read one with a codiprog ??? Brave man

[PremierD]

Worth a go mate .. although it does seem a tad simple :)

[Auto Clinic]

thank you PremierD (http://www.digital-kaos.co.uk/forums/members/57580-premierd/)
i did but not working

[rukartinatv]

thank you PremierD (http://www.digital-kaos.co.uk/forums/members/57580-premierd/)

i did but not working
What you mean not working?

[carbandit]

What you mean not working?

meaning premier d tried to edit data to required km 0 but is still showing original i presume...

[PremierD]

thank you PremierD (http://www.digital-kaos.co.uk/forums/members/57580-premierd/)

i did but not working

Can you read it again and see what has or has not changed mate .. ?

[Auto Clinic]

meaning premier d tried to edit data to required km 0 but is still showing original i presume...

Yes ,

Sent from my GT-I9505 using Tapatalk

[PremierD]

waiting for another read mate ... :) after it did not work ..

[Auto Clinic]

waiting for another read mate ... :) after it did not work ..


very danger read and write again.
i want sure then write dump again

[tech_cz]

Here it is OK:

254686

WBR, Marek

[Auto Clinic]

Here it is OK:

254686

WBR, Marek


thank you tech_cz (http://www.digital-kaos.co.uk/forums/members/111237-tech_cz/)

i will test and result to you

[cheester]

Can some do the mileage for 520d 2010, have read by smok jtag all success but old mileage jump back. Ori is 119368mls and need 69000mls

thanks in advance

[smartymarti]

theres your dash done

[rukartinatv]

Can some do the mileage for 520d 2010, have read by smok jtag all success but old mileage jump back. Ori is 119368mls and need 69000mls

thanks in advance
After you did cas4 with smok
milage jump back?

[tech_cz]

Here is all:

254988

WBR, Marek


P.S. And don?t forget to press thanks like "Auto Clinic" have forgotten :blue:

[PremierD]

tech_cz (http://www.digital-kaos.co.uk/forums/members/111237-tech_cz/)
And check your PM mate .. :)

[cheester]

After you did cas4 with smok
milage jump back?
Was doing cas4 first time and was worry a bit but jtag done the job 100%, unsecured, read and write new mls, I just mess with the dashboard. Ori memory is 160D0WQ and had only spare 35080 but could not write it, tried on few and always was something missing so decided modify ori eeprom with sucess but problem was a calc,ive use dash tool read as 35080 and got correct mls so changeded using same algo , but old mls was after ignition on. New mls never came up even for 1sec, hope this time will be ok and all will go fine.
Thanks for help mates, will test new files in next 3h and report here.

[cheester]

Thank you Tech_cz, I've used yours files, all perfect :)

[smartymarti]

Knowledge is power , however power is useless if no one knows you have it . Think about it

[cheester]

Here it is OK:

254686

WBR, Marek

Tech-cz are you using same algo for cas4 as micro-calc provided by smok??

[tech_cz]

No, HexEditor Neo.
I can not image that any calc can make it well.
You have there actual mileage and also mileage hundreds and thousand miles before.
I suppose micro-calc erase big part of memory, no just the mileage.
I?d like to see mileage made by the micro-calc.

WBR, Marek

[Auto Clinic]

Here is all:

254988

WBR, Marek


P.S. And don?t forget to press thanks like "Auto Clinic" have forgotten :blue:

sorry for late thanks
i was in holidays


Sent from my iPhone using Tapatalk

[cheester]

No, HexEditor Neo.
I can not image that any calc can make it well.
You have there actual mileage and also mileage hundreds and thousand miles before.
I suppose micro-calc erase big part of memory, no just the mileage.
I?d like to see mileage made by the micro-calc.

WBR, Marek

I will post the files today made by micro-calc....

[dvdegrt]

Hi can someone help me reset mileage cas4 bmw 540d year 2011
has around 152300km best made zero or 110988km first cas for me
vith 5m48h read vith xprog if someone can help reset so see vhat
happen thanks david

[cokolo]

Hi can someone help me reset mileage cas4 bmw 540d year 2011
has around 152300km best made zero or 110988km first cas for me
vith 5m48h read vith xprog if someone can help reset so see vhat
happen thanks david

Here you are 10km :joyous: if original km is 152315km and vin WBAXA910....87323 :joyous:

[cheester]

No, HexEditor Neo.
I can not image that any calc can make it well.
You have there actual mileage and also mileage hundreds and thousand miles before.
I suppose micro-calc erase big part of memory, no just the mileage.
I?d like to see mileage made by the micro-calc.

WBR, Marek

As I promised, attached files made by micro-calc from SMOK.
Once I made 0km and other time made 196km for test and read again by Jtag,
tech_cz can you please check these files and let us know what you think abut SMOK calc.
Maybe there is a problem because when I used this calc old mileage jump back, but when I use yours files all was perfect!

[PremierD]

It has missed 7 /14 (two in each ) instances of the original km's mate ..in the 196km's version as well as the same seven locations in the Zero km's ... so the ratio of pass and fail is about correct . the original has them all ... lol

[dvdegrt]

thanks go try then let know if ok

[cokolo]

thanks go try then let know if ok
It's Ok 100% trust me :-)

[dvdegrt]

Yes all ok car start all vork fine mileage stayed at 110000km like put in tacho
so good seems not so much truble read and vrite hardest lift pins and maybe trouble
unlock it but seems can xprog can read vithout unlock me made backup first then unlock
also tested before on a cas never 51week 2012 friend killed vith codiprog also read fine
only vas mising part of flash deleted that probably friend delete vith codiprog

[dvdegrt]

Me checked lilte cas4 dumps and try make it zero myself
can someone check if me made it corect thanks david

[tech_cz]

So, for cheester MicroCalc missed 10 places (with active mileage).
For Cokolo, it was much better missed just 8 places with older backups, I can see that they are not so important.

WBR, Marek

[spawns3]

So, for cheester MicroCalc missed 10 places (with active mileage).
For Cokolo, it was much better missed just 8 places with older backups, I can see that they are not so important.

WBR, Marek

So how much places he have to change ? I count 19 . If i m not wrong :D

[PremierD]

Try it and see mate .. :)

[spawns3]

Try it and see mate .. :)

When i have one car to do i will try it ;)

[cokolo]

So how much places he have to change ? I count 19 . If i m not wrong :D

Depending from version of sw in cass. Not always km on same place, from my experience.

[spawns3]

Depending from version of sw in cass. Not always km on same place, from my experience.

yes i see that , i have compared some dumps and always in different adress .

[cheester]

My first cas dead :( a bit dissapointed, smok j-tag unsecured the mcu and read just FFFFFFFF, didnt write anything.
There is no ignition at all now. I had to try couple times unsecure cpu because was getting error. Finaly unsecured but read nothing.
There is any chance to alive this CAS4? Heard that dflash can be ereased when you write not read....

Can someone tell me now how much cost the cas4 and some coding need to be done when I will get new one?? Or just plug&play??

[cheester]

Another question, all brand new CAS4 are with no mileage right? So before I put new CAS4 can I adjust dash and mileage will stay on?

[peko]

Another question, all brand new CAS4 are with no mileage right? So before I put new CAS4 can I adjust dash and mileage will stay on?

Yes friend ;)

[Auto Clinic]

Another question, all brand new CAS4 are with no mileage right? So before I put new CAS4 can I adjust dash and mileage will stay on?

All cas4 saved mileage

Sent from my GT-I9505 using Tapatalk

[cheester]

What about new cas4, its plug&play or need to programmed?

[vageric]

all cas need to be programmed.
either by you self or by the dealer!

[amir_82013]

[QUOTE=cheester;2292482]My first cas dead :( a bit dissapointed, smok j-tag unsecured the mcu and read just FFFFFFFF, didnt write anything.
There is no ignition at all now. I had to try couple times unsecure cpu because was getting error. Finaly unsecured but read nothing.
There is any chance to alive this CAS4? Heard that dflash can be ereased when you write not read....

QUOTE]

You tried reading with SMOK J-TAG but CAS damage ? pin conection correct solder?
Please send a pic of location soldering pins.
What is model BMW ? 20??

[cheester]

Model is f10 520d, 2011, i was using solder points provided by smok, last time went perfect, just wonder what could be a reason of that? Only difference was that I could not unsecure mcu easy this time, tried good few times, checking solder points, finaly unsecured but was all ffff,

Im working with standard wires, but some other users changing coax wire.
Im afraid a bit to read next one, cas4 cost 420eur in dealer.

[amir_82013]

i reading always with xprog original without problem .(lift pin) ,last reading model 12-2013

[cheester]

i reading always with xprog original without problem .(lift pin) ,last reading model 12-2013
You never had any problems? What is the price for ori xprog with this autorization?

[amir_82013]

1700 Euro for:
XPROG-box
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY

ELDB.Co (http://www.eldb.eu/index.php?route=product/product&path=35&product_id=77)

[cheester]

I have change coaxial wire on my Jtag and play a bit with my damage cas, as a mcu is unlocked I read all again and got different data, with original wire got all FFFF, after change wire it read a bit more data but still big part is missing. I wrote dump from different cas4 (many times), no problem, then read again, 100%, nothing is missing. Change mls and single bits, read again, all perfect 100%, in my opinion the bigest problem is ''unsecuring'' process, once mcu is unlocked you can do anything with jTAG and looks its better to replace original coax wire, will test on next car ....

[cheester]

Before I put new CAS can someone please do dash for me :

ori : 120.206 mls
new : 68.000mls

Thanks for help

[alex1975]

If you wright dflash from another cas
This is not fix you problem the cas will be dead!!!
you can change to new 9s12xep mcu then you can wright new dflash and pflash and program the keys.
and program all car with ista this is will fix the problem.
jtag from smok not good its eraze dflash in 50%
Smok sell jtag but its not work as they say 90%
there is only one programer from russia can do safe cas4 5m48h
in 80% its will not eraze dflash.
And if after read dflash part will be erazed the owhner
of this product find solution how to fix dead cas4
And i try this solution its work 100%
its fix the cas but its take like 40 min to fix it
but after car its start and new km show on the dash.

[PremierD]

Before I put new CAS can someone please do dash for me :

ori : 120.206 mls
new : 68.000mls

Thanks for help

As requested mate ... :)

[TULGEYWOODMAN]

If you wright dflash from another cas
This is not fix you problem the cas will be dead!!!
you can change to new 9s12xep mcu then you can wright new dflash and pflash and program the keys.
and program all car with ista this is will fix the problem.
jtag from smok not good its eraze dflash in 50%
Smok sell jtag but its not work as they say 90%
there is only one programer from russia can do safe cas4 5m48h
in 80% its will not eraze dflash.
And if after read dflash part will be erazed the owhner
of this product find solution how to fix dead cas4
And i try this solution its work 100%
its fix the cas but its take like 40 min to fix it
but after car its start and new km show on the dash.
I think he is fitting a new cas

[cheester]

If you wright dflash from another cas
This is not fix you problem the cas will be dead!!!
you can change to new 9s12xep mcu then you can wright new dflash and pflash and program the keys.
and program all car with ista this is will fix the problem.
jtag from smok not good its eraze dflash in 50%
Smok sell jtag but its not work as they say 90%
there is only one programer from russia can do safe cas4 5m48h
in 80% its will not eraze dflash.
And if after read dflash part will be erazed the owhner
of this product find solution how to fix dead cas4
And i try this solution its work 100%
its fix the cas but its take like 40 min to fix it
but after car its start and new km show on the dash.

I understand that you try to explain how to alive erased cas4
For this car I bought new cas, but I would like to know how you do it.
Please tell what tool/soft you using to program the key in cas4, and you saying I can take any cas4, use new mcu, write which flash+eep??
after program the key and pair all with icom?
Where you can buy 5m48h cheaper than 55eur (codecard.lt)

[robinn7]

So the best way to do this job is: change dash, And buy new cas4? What's going to happen with the mileage on the keys?

[drpeter]

So the best way to do this job is: change dash, And buy new cas4? What's going to happen with the mileage on the keys? best way is using a can filter

[davecooper47]

Can anyone confirm if any of the available can filters will change the mileage in the keys. One of them professes to do so but I've been told they don't work.

[peko]

hi friends

in key maybe yes, but not in cas ! i confirm with filter inside, you can see ori in cas , next cas4 i will post screen from cas after job

[javyb]

hi friends

in key maybe yes, but not in cas ! i confirm with filter inside, you can see ori in cas , next cas4 i will post screen from cas after job

So if you fit blocker in cas unit it dash the original mileage in cas can be found?

[fruti]

If you wright dflash from another cas
This is not fix you problem the cas will be dead!!!
you can change to new 9s12xep mcu then you can wright new dflash and pflash and program the keys.
and program all car with ista this is will fix the problem.
jtag from smok not good its eraze dflash in 50%
Smok sell jtag but its not work as they say 90%
there is only one programer from russia can do safe cas4 5m48h
in 80% its will not eraze dflash.
And if after read dflash part will be erazed the owhner
of this product find solution how to fix dead cas4
And i try this solution its work 100%
its fix the cas but its take like 40 min to fix it
but after car its start and new km show on the dash.


Hey alex ... what russian tool are you refere ?

[rukartinatv]

So if you fit blocker in cas unit it dash the original mileage in cas can be found?
Depend which blocker you use
All from different company.
mbcleaner sell the best blocker
in the cas in the key the same km.

[peko]

...
in the cas in the key the same km.

friend is not possible, you not write cas so how mileage can down !
if with good filter, cas show new mileage, after finish job, no need filter .... you can take out filter ;)

[rukartinatv]

What you mean after finish job
you can take out the filter?
can you explain please ?
thank you

[PremierD]

At a guess I'd say that .. you state the CAS writes the kms to the Keys .. ? so after you put in the can blocker /.. the keys cant recieve the kms from it .. so you cant alter the km's in the keys .. if you could then there would be no need for a can blocker .. I think lol

Cas and keys at 30,ooo km's .. dash at 20,ooo ... see the problem ?

[peko]

response to all questions is response from this question : key take info from cas or direct from dash ? (not forget dash come back ori if cas stored more mileage)

so filter or also bloker .... what interest ?

[rukartinatv]

response to all questions is response from this question : key take info from cas or direct from dash ? (not forget dash come back ori if cas stored more mileage)

so filter or also bloker .... what interest ?
filter or also bloker .

[Auto Clinic]

i need 0km for this CAS4
i did not see same this dump

[PremierD]

Strange one this .. only one instance .. however its now Zero ...:)

[robinn7]

If you change Mileage on dash, and replace cas4 for a new one. What's going to happen with the mileage that's stored in the keys from the car?

[robinn7]

best way is using a can filter

I use a can filter but car won't start anymore!

[TULGEYWOODMAN]

I use a can filter but car won't start anymore!

So will the world come to an end if you tell the punters you don't do late BMW?

Just think of the money you will save on headache pills.




Bye bye brazil:aetsch:

[Meat-Head]

So will the world come to an end if you tell the punters you don't do late BMW


Cant see why if its a new car, just unbolt all 4 abs sensors and use tomtom fir speedo.
Soo much less hassle than trying to incorrect it.

ON TOPIC:-

when car is low km can you install can locker so abs works, but speedo/milage don't?

[captain crackers]

8 pages of how to wreck a cas 4 and people still think it's worth trying! Arthur.

[dataprog]

I work every day 2 or 3 car
Cas4 bmw 5m48H up 2011

I have a special programmer from a long time

Intelligence needs

[Meat-Head]

Can you iShit a photo of your programmer

[puiu]

I work every day 2 or 3 car
Cas4 bmw 5m48H up 2011

I have a special programmer from a long time

Intelligence needs

And can you enlighten us? :)

regards

Puiu

[rukartinatv]

What programer is this?

[captain crackers]

A special but very secret programmer. Arthur.

[Meat-Head]

Is it German called enigma got 7 cyckinders of wax or something

[captain crackers]

Sorry can't tell you , it's too secret. Try TULGEYWOODMAN, he looks a bit German. He might spill the bratwursts. Arthur.

[TULGEYWOODMAN]

eetz nowt poseeble to spill ze beenz Artur cos Mr Dataprog need ze sekret to make ze koin to keeps ze Roller Royce in kerosene.

Eez very reech kookey.

no goot yer orl been jellyous of eem .


Ees ze Dobbermans bollikz.


heil hitler

[an do notz get angrier wiz me kos uze lot onlee speekz won langwayge]

[rukartinatv]

There is now programer that work
100% on cas4 today
So no one can do cas4
and you can :(

[cklair]

what the hell,no body want to share the programmer name or company?what is the secret behind it...

[dataprog]

Who wants to buy
2500 GBP price
That did not work
Will refer you money
Do not ask
Name programmer

[dataprog]

rolls royce ghost 2014

[TULGEYWOODMAN]

rolls royce ghost 2014

Many tanks for ze veery informatif picture.

Jus wot every bodies wanted................NOT

[captain crackers]

Vauxhall Vectra 2005. Arthur.

[rukartinatv]

Who wants to buy
2500 GBP price
That did not work
Will refer you money
Do not ask
Name programmer
Dialprog cost 2500 euro and you hove to desolder small resistor from cas.
this is italian company.
usprog from mbcleaner work like 75%
there is no other programer out there.
So you wont me to send you 2500 euro:)
please post photo of your programer
there is no secret there.

[dataprog]

Yes, there are secret
I'll tell you 100/100
Works on all cas4 5M48H
all bmw cas4 5M45H 2011-2014

:top:

[PremierD]

Then mate .. Put up or shut up ...............

[TULGEYWOODMAN]

Then mate .. Put up or shut up ...............

and this my friends, is where the Houdini act starts.

[rukartinatv]

Yes, there are secret
I'll tell you 100/100
Works on all cas4 5M48H
all bmw cas4 5M45H 2011-2014

:top:

5m48h:)
so who made this programer you
just 7 wires solder? Or desolder resistor lift any pins?
can you make video and show that is work?
what country you are?
paypal its ok?

[dataprog]

There is something in the cas4
It should work

[dataprog]

I speak frankly
.........................................

[Meat-Head]

No mate no emails aloud or a quiet , naughty noonoo

[TULGEYWOODMAN]

There is something in the cas4
It should work

Yes , a nutcase!

[rukartinatv]

This is dialprog from italy
there is no another programer.
i think its cost 2500 euro.

[captain crackers]

So can it do the 2005 Vauxhall Vectra or does it only do the 2014 Rolls Royce Ghost? Arthur.

[gwee]

a seller from our forum approached me, told me he is having a programmer to do 5m48h.

he told that he had done so many, all ok

only 1 out of 10 will get damaged

i know very well, if i buy that, i will definitely be the unlucky 10% lol

[smartymarti]

rolls royce ghost 2014

Where was this picture taken , I only ask ad I need a week away and at 41degrees it must be lovely weather

[rukartinatv]

a seller from our forum approached me, told me he is having a programmer to do 5m48h.

he told that he had done so many, all ok

only 1 out of 10 will get damaged

i know very well, if i buy that, i will definitely be the unlucky 10% lol
Again he use dialprog programer italy.

[dataprog]

You do not know the work
Are you looking for the words on the forum
I'm working on all cas4 bmw 5M48H

Send me cas4
from kuwait

[dataprog]

By the way
I do not use this:joyous:
dialprog programer italy

[TULGEYWOODMAN]

You do not know the work
Are you looking for the words on the forum
I'm working on all cas4 bmw 5M48H

Send me cas4
from kuwait



What exactly is the point you are trying to make.?

Is it you are advertising to do cas4 for forum members?

If so, what is the charge?



Ps Don't forget to vote ukip after watching "Benefits Britain" on the telly tonight

[rukartinatv]

By the way
I do not use this:joyous:
dialprog programer italy
There is know secret if you are in this business.
today only 4 programers can do cas4
dialprog
usprog
xprog
there is no another programer
that work stable.
so dont try to sell here something
no one will send you 2500 for your secret:)
its not work this way.
you wont to sell something but dont know the name
or photo.
thank you

[dataprog]

I am of the Year And I'm working on cas4
I'm not going to sell any product programmer
Today I worked 2 car bmw f01 2012 2 car ser6 2012
2 car cas4 5m48h
I gained money 2000$

[javyb]

I am of the Year And I'm working on cas4
I'm not going to sell any product programmer
Today I worked 2 car bmw f01 2012 2 car ser6 2012
2 car cas4 5m48h
I gained money 2000$
When u post some videos of cas mask and u unlocking then we will believe

[TULGEYWOODMAN]

I am of the Year And I'm working on cas4
I'm not going to sell any product programmer
Today I worked 2 car bmw f01 2012 2 car ser6 2012
2 car cas4 5m48h
I gained money 2000$

Ooooooooooooooooooooooooooo. Loads a money!

( I am considerably richer than yow)

[motorsport]

Dataprog where you live if you realy charge 1000$ for 1 car bmw equiped with cas4 think will work in your town

[carbandit]

Attention seeking bulls@it ...thinly veiled "I've got super dooper programmer you s guys don't "

[dataprog]

Yes, this is true in Kuwait
I have worked 2014 Rolls Royce Ghost $ 3,500

[rukartinatv]

3500$
i like this why not 10000?

[gwee]

Yes, this is true in Kuwait
I have worked 2014 Rolls Royce Ghost $ 3,500

yes, this is true in sri lanka, we do Toyota mileage for this price too lol

[TULGEYWOODMAN]

Yes, this is true in Kuwait
I have worked 2014 Rolls Royce Ghost $ 3,500

Cheaper to ship the roller to Banny in Bradford!

[Meat-Head]

Cheaper to ship the roller to Banny in Bradford!

yeah, in it, know what I mean. (No mention of dk)

dudnt think ANYBODY could do them?

isnt he dk member enigmauk, or something to do with ?

[TULGEYWOODMAN]

yeah, in it, know what I mean. (No mention of dk)

dudnt think ANYBODY could do them?

isnt he dk member enigmauk, or something to do with ?


Korrect, he is a clever boy

[Meat-Head]

Korrect, he is a clever boy

I was stalking late one night , and the penny dropped.

[aivarys]

Hi mates need to reset to 0 km bmw f10 535i 2012 my

Thanks

[TULGEYWOODMAN]

Hi mates need to reset to 0 km bmw f10 535i 2012 my

Thanks
We'll if you are clever enough to read and write the micro mate, the KMs adjustment should be like weeing in a bucket for you

[vokinn]

Hi mates need to reset to 0 km bmw f10 535i 2012 my

Thanks

If your car had 98820 KM then the attached file is zero km.

[aivarys]

yes the car had 98820, read with good china clone xprog, first tested on cas from scrapyard

[autofan1965]

In circuit or in adapter?

[rukartinatv]

yes the car had 98820, read with good china clone xprog, first tested on cas from scrapyard
From where did you bought china xprog?
did you lift the pins on the processor?
thank you

[TULGEYWOODMAN]

From where did you bought china xprog?
did you lift the pins on the processor?
thank you
Ugh oh! I feel disaster looming.............................

[aivarys]

yes lift pins, everything is working fine thanks. xprog bought my friend from his suplier. not from the first time was good quality of xprog but we had cas4 for tests

[aivarys]

just for know tested to clone cas4 everything works perfect both cas 4 is working with same car

[rukartinatv]

just for know tested to clone cas4 everything works perfect both cas 4 is working with same car
What you mean?
you take old cas and wright dflash pflash from original cas?
and now 2 cas working?
From what website you bought
xprog?
thank you

[aivarys]

not a site my friend is buyng from some chinese guy that has only skype and email

[Dashcoder-Alexander]

276399do not forget to lift the two pins and do not play with set security ..
leave state of security after reset security as it is.... xprog is more stable as other tools

[rukartinatv]

Alex how do you lift this two pins
and not to broke them?
And after how you solder back?
thank you

[Dashcoder-Alexander]

Alex how do you lift this two pins
and not to broke them?
And after how you solder back?
thank you

lift with a skalpel but you have to heat them all the time ...no heating and they might brake ! .....later push them down with the soldering tool.... to all beginners please make training of this on old pcb before not on the car of a customer.
now some users here have confirmed that it works ...in this forum peple should hepl each other ... who will make the manual ?

with copyright of this forum please .... i gave to some the adress where they can purchase the hardware please refer to this forum and try to get 10% discount ....report discount too.

[88diablo]

Other way I find easy / easyish is to take just 1 strand from thin copper multicore wire and thread it under pin/leg, pull through with tweezers so you have both ends of wire wrapped under pin and hold in one hand then apply solder iron to pin and wiggle wire side to side and wire will come under pin and break solder contact.

[Fec001]

yes lift pins, everything is working fine thanks. xprog bought my friend from his suplier. not from the first time was good quality of xprog but we had cas4 for tests

China clone V5.50 what you use for 5M48H CAS4?

[TULGEYWOODMAN]

Lovely game Russian roulette............

[markony79]

yesterday i damage 2 cas4 with 5M48H with original Xprog-m ,
i also lift the pins, but conect them with 2 little wires long 2cm, then on them 2 cm conect the Xprog-m
i was do 6-7 bmw with new CAS4 5M48H, and not get problem, but yesterday its happends

my garage is now closed becouse i dont have place for new coustomres and on the first place is to fix this 2 BMW, 1 is 520d 06 2011 , and another is 740d 06 2011

and this cars is automat gearbox, need special tool to put in N and pull out

[88diablo]

I always tell customers the risks involved in these jobs so just bill them for new cas. Not that expensive and I'm sure the price they are saving on miles still makes it worth while. Don't have garage shut dude, just tell them straight that what they have asked you to do is not a guarantee risk free process.

[lupu_sandu]

Always remove CAS4 when car is in outside yard. Minimize risk to have garage blocked by and Fxx unable to move :)

[Meat-Head]

Marking79 mate are these units now scrap or can you repair.

not sure if this helps but perhaps bit dodgy just run laptop off battery's.

just woundr ring if mains 50/60hz hum is killing these.

Those who not killed one what computer do you use? Laptop desktop?

[88diablo]

Not just for you these but I run all my programming stuff off Battery boost pack just in case of power cut.

[mislav88]

if going to start in correcting f series cas4, your first investment in tools for cas4 automatic cars should be set of theese
http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=295385&stc=1

[amir_82013]

Marking79 mate are these units now scrap or can you repair.

not sure if this helps but perhaps bit dodgy just run laptop off battery's.

just woundr ring if mains 50/60hz hum is killing these.

Those who not killed one what computer do you use? Laptop desktop?

Thanks friend
1- which better ? PC with backup power or Laptop with connect charger ?
2- How i can check Frequency around ؟

[phonebox07]

Try this IF U HAVE PROBLEM PM