Kia edc17c08 tc1766 boot mode

[ominimicu]

I am struggling to read this ecu Kia edc17c08 tc1766 boot mode tried both fgtech and kTag...no ID.
can anyone confirm correct pinout i found 2. of them
http://wiki.obdtuning.com/images/4/4d/Hyundai_EDC17C08_Layout.jpg
and the one from fgtech or ktag database.
all sens identical except for CAN lines pins.

can anyone cofirm or these ecus cant be read yet?

[ominimicu]

BUMP! come onn no one ever read a a tricore kia???

[zoyzoyni]

261499no mate this one is the right one and boot dont keep with hand,solder it on board.good luck

[ominimicu]

i have 94 and 60 pins in the connectors. that photos shows a ecu with 105 and 91 pins...

[ominimicu]

tried with that different CAn lines setup does the same Here sa video
https://www.youtube.com/watch?v=AxzqhgvEhkE

[zoyzoyni]

mate why dont you read in positioning frame?

[ominimicu]

i dont have one...

[zoyzoyni]

did you try galleto v53 pin88(can HI) 87 CAN LOW AND PIN 46 KLINE?NOT +12.?PIN 46 +12 IS THE NEW DRIVER.

[mihaiservice]

Hi
try to connect like ecu with tc1796 with 61/94 pins,maybe are the same pinout,be carefull !!!
pin67-Can Low
pin68-Can High

here you have also pdf with boot mode


Mike

[ominimicu]

i tried fgtech and ktag with both CAN lines posibilites 12v i have not tried i dont wanan damage ecu.
I know ECU is ok becasue it was new from KIa dealer

[zoyzoyni]

mate try this one is new.:top:261654

[ominimicu]

tried this one with fgtech but gonna try with ktag too thanks

[zoyzoyni]

post mate?

[ominimicu]

just tried...same result

[Alpinesport]

Hi what car and what year GND pin 2 / +12v pin 1,46 / can H 88 / can L 87 I have don a ix55 v6 and we had to make a new protocol new trot

[ominimicu]

no idea what car it is :D Kia supplied me only with ecu i know it sa 2.0 diesel engine bosch number 0281017045 1039S46865
Just like this one!
Beyincim.com - 0281017045 39101-2F565 HUNDAYI DIZEL MOTOR BEYN? (http://www.beyincim.com/0281017045_39101-2F565_HUNDAYI_DIZEL_MOTOR_BEYNI-UR1041.html)

[zoyzoyni]

mate wait we must check something?your ecu is virgin and you try to copy the virgin file?cause if yes this is commonfail problem from edc17xx.many they are with double passworth security.and unlock only after first initial with factory diag.initial is remove secont pass where is all protected.isuzu transtrom ecu are the same.

[zoyzoyni]

and i forgot:joyous:give one more shot to read as tha last script i send but boot make a bridge in position frame contacts in pin 10.

[ominimicu]

this ecu comes from a KIA diesel 2.0 car was brand new but car started and worked fine! I dont understand the pin 10 contact

[zoyzoyni]

pin 10 it works in posistion frame as boot.maybe the ecu will boot??

[ominimicu]

which is pin 10 pls?

[zoyzoyni]

262297here mate.tell me what tool you have for try in position frame read (xprog-kess ?

[ominimicu]

i ahve xprog and i have Ktag too i dont have the frame.
and that boot to pin 10, i shoudl do thte same with my boot pin? which is diferent becasue it s diferent ecu

[zoyzoyni]

YES WITH YOUR BOOT PIN MAKE SAME CONECTION.

[ominimicu]

just tried..no id...i give up...maybe ecu is not ok. i dunno

[zoyzoyni]

must buy fggalleto.i thing this ecu read well.

[ominimicu]

i ahve galleto tried same thing