Cable pin out Zed Bull 4D cloning TPX Cloner Module

[tqnata83]

https://www.youtube.com/watch?v=SxmZFVgoiXU

I bought TPX Cloner Module but i don`t have red cable (like video i youtube)

i need help

I want to ask someone who has this cable to say pin out both side

[sv2hqx]

Didn't try but some one has posted
http://www.digital-kaos.co.uk/forums/showthread.php?t=274682

Sent from my Optimus 4X HD using Tapatalk

[Cromwe11]

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=285563&stc=1

[tqnata83]

thanks i will try

[sanchos]

I tried like this but dosnt work
comunication error
what i am doing wrong ?

[MACKIE]

Anyone try to use it with zedbull mini ?

Regards
Mackie

[Automat]

Which software version is needed for this?

[ruffles1986]

it work for clone big zedbull?

[ancient]

it work for clone big zedbull?

Yes, it works with fullsize zedbull clone.

http://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=298767&stc=1

[Automat]

Is your pin-out same as above picture from Cromwell?

[ancient]

Is your pin-out same as above picture from Cromwell?

Yes it is.

[Buddy41]

I see its been a while but anybody confirm this works.
Many thanks

[paul_12345]

I see its been a while but anybody confirm this works.
Many thanks

How many people do you need to confirm?? you've got at least 2 people.... try it.

[ray-ray]

Is your max232 even hook up to your db9

[Buddy41]

yes
I managed to connect earlier and see 1,2,3% etc
I also see message about special password etc.
Followed by TPX2 / EH2 etc

But since only see awaiting module

[Buddy41]

397296397297397298
This was this morning.
Still with everything connected i ONLY switch off mini.
I then switch on again,read chip R,then select W,then in the menu option 3 TPX MODULE.
Now i only see WAITING FOR MODULE message.
Any advice where i start to look for why this ghappens.

Thanks

[Cromwe11]

Zed-full mini. Don't these only have a usb connection? What are you connecting the tpx module to?

[Buddy41]

This is a Zed Bull Mini.
It has an ADSL model cable port for the tpx module

[paul_12345]

This is a Zed Bull Mini.
It has an ADSL model cable port for the tpx module

have you actually opened it to check its connected to anything.

[Buddy41]

have you actually opened it to check its connected to anything.

If it wasnt connected to anything i wouldnt get the prompt TPX2 or EH2 would you ?
Ive done a video but trying to sort a link etc

[Buddy41]

Try this

http://www.mediafire.com/download/cb1u8fv4w25xprw/MINI_ZED_BULL_4D_TPX_mov.MOV

[solitaire]

https://youtu.be/9yDFguORhmE

[mikajna]

Look guys, I had also experience with this problem, I have full sized Zed bull and it have all needed component for working, when I make cable it didnt work, just stuck on looking for cloner or something like like that, and after many many many trying to fix this problem, changing max232 and etc, once time same moment after choose TPX cloner on zed bull screen, same moment it start calculation and do it well, after that it worked like a charm every time I try calculate Texas Key, SINCE I shut down zed bull...after turning on, it was same story I need to molest zed bull for about 20min, and hundreds time trying since they start calculating....and till now I never sort this problem, but now have ND900 and Quickly 4C/4D/46 and didnt worked on that anymore, but cant find what stuck with zed bull, and why not working good, and that tpx cloner working grate with nd900 and quickly cloner

What do you think guys...