2 button citroen c2 remote programming

[loid]

hi, can anyone help me with programming instructions for a citroen c2 2009 model

[simaservis1108]

It is programmed with key,automatically.

[loid]

the key is programmed but the remote isn't maybe there is another way of doing it

[paul_12345]

if the key has a pcf7941 etc, then it programs at the same time as the key and will sync when the key has been used in the ignition.

if the remote is not working then there is a fault with the remote or car

[coolsoda]

If you have purchased the wrong key,will start car,but the remote part will not work after programming
Where did you buy the remote key


Correct Key

Citroen 2 Button CAN Flip Remote with PCF7961 (was PCF7941)
Sticker Number: (was)
643424 ED24 JCAE
Sticker Number: (now)
038436 JCAE ED27
Cross Reference:
3D Group: CTR16.
Genuine Part Number: 649086 (un-cut) or 6554NR (cut)
Advanced Keys: AKK246
Hickleys: HVRM76
NW Keys: CTN-NWKS50

Vehicles:
Citroen C2 CAN 2005-2009
Citroen C3 CAN 2006-2009
Citroen C3 Pluriel CAN

[kemaster]

When finish transponder programming part wait 1 min then switch ign on and press lock button for 10 sec, then switch off and test the key( It's by memory from Lexia instructions).

[ninja123]

all of this type of key will program to immo and work to start the car, but you must have correct remote for car or will not work, and you have now locked the key by programming so you cannot use it on another car.

Very common problem with china/ebay keys.

ninja

[loid]

i must have used a wrong remote thanks for the info guys